hi
I have installed www/squid33 from ports on FreeBSD 10.0-RELEASE.
Squid works, but the problem is, I cannot find and don't know where can I put some squid parameters, like for example "shutdown_lifetime".
I have installed www/squid33 from ports on FreeBSD 10.0-RELEASE.
Squid works, but the problem is, I cannot find and don't know where can I put some squid parameters, like for example "shutdown_lifetime".
Code:
# cd /usr/local/etc/squid
# ls -la
total 368
drwxr-xr-x 4 root squid 512 Feb 20 13:44 .
drwxr-xr-x 10 root wheel 512 Feb 20 14:20 ..
-r--r--r-- 1 root wheel 419 Feb 20 13:38 cachemgr.conf
-r--r--r-- 1 root wheel 419 Feb 20 13:38 cachemgr.conf.default
-r--r--r-- 1 root wheel 1547 Feb 20 13:38 errorpage.css
-r--r--r-- 1 root wheel 1547 Feb 20 13:38 errorpage.css.default
drwxr-xr-x 47 root wheel 2560 Feb 20 13:38 errors
drwxr-xr-x 3 root wheel 512 Feb 20 13:38 icons
-r--r--r-- 1 root wheel 30831 Feb 20 13:38 mib.txt
-r--r--r-- 1 root wheel 11954 Feb 20 13:38 mime.conf
-r--r--r-- 1 root wheel 11954 Feb 20 13:38 mime.conf.default
-r--r--r-- 1 root wheel 421 Feb 20 13:38 msntauth.conf
-r--r--r-- 1 root wheel 421 Feb 20 13:38 msntauth.conf.default
-r--r--r-- 1 root wheel 2504 Feb 20 16:55 squid.conf
-r--r--r-- 1 root wheel 2327 Feb 20 13:38 squid.conf.default
-r--r--r-- 1 root wheel 265390 Feb 20 13:38 squid.conf.documented
-r--r--r-- 1 root squid 2327 Feb 20 13:44 squid.conf_orig
Code:
# cat squid.conf
#
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
#http_access deny all
http_access allow all
# Squid normally listens to port 3128
http_port 3128
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/squid/cache/squid 100 16 256
cache_dir ufs /var/squid/cache 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/squid/cache
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320