I have just migrated my netatalk server to be inside a jail. I can access my shares directly using the IP address, however mDNSResponder does not work.
Unfortunately, mDNSResponder is terrible at logging, I ran it in interactive mode by using the following:
This is the output of ifconfig
The jail is using interface lo1
On the host I have the following in /etc/rc.conf
On the host this is the output of
Does anyone know how to resolve this?
Thanks in advance.
Unfortunately, mDNSResponder is terrible at logging, I ran it in interactive mode by using the following:
Code:
# /usr/local/bin/mDNSResponderPosix -v 2 -f /usr/local/etc/mDNSResponder.conf
mDNSResponderPosix: Starting in foreground mode, PID 2796
socket AF_INET6: Protocol not supported
This is the output of ifconfig
Code:
# ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether a0:b3:cc:e2:5d:7d
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 192.168.0.1 netmask 0xffffffff
lo2: flags=8008<LOOPBACK,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
The jail is using interface lo1
On the host I have the following in /etc/rc.conf
Code:
# -- Jails
ezjail_enable="YES"
cloned_interfaces="lo1 lo2"
ifconfig_lo1_alias0="inet 192.168.0.1 netmask 255.255.255.255"
ifconfig_lo2_alias1="inet 192.168.0.2 netmask 255.255.255.255"
On the host this is the output of
ifconfig
Code:
# ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether a0:b3:cc:e2:5d:7d
inet 10.0.0.3 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152
nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet 192.168.0.1 netmask 0xffffffff
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo2: flags=8008<LOOPBACK,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Does anyone know how to resolve this?
Thanks in advance.