Loader, MBR and the boot process

[Jago]

I recently found a nifty "FreeBSD ZFS root installation script" and been reworking it a bit to suit my needs better, including changing it from GPT to MBR partitioning. However, I was stumped, even though I had done everything right (or so I thought), the system would get stuck at Loader and refuse to go anywhere. After trying over a dozen different things, it downed on me to change the partition order inside the slice, I had 1) swap 2) freebsd-zfs and for the test, I got rid of swap altogether and gave the entire slice to the freebsd-zfs partition. Suddenly, my problem went away and the system booted just fine. So it seems that Loader requires that the partition containing the files vital to the boot is the first partition on the slice and that "swap first, then the rest" doesn't work.

The thing is, I am absolutely positive that in the past, I've had sysinstall created installs using MBR partitioning and that I had swap as my first partition inside the slice and that it all worked dandy. Has this changed at some point? Oh, and for the curious the installation script is here: http://jago.pp.fi/zfsmbrv1-works.sh

 

[Jago]

And before someone suggests that my script might be writing the bootloader into swap space, that was already pointed out to me on the mailing lists - I double-checked: I uncommented the swap line in the partitioning part again, ensured I was writing the bootloader to "${TARGETDISK}"s1b and ran the script. Same problem, hangs at loader. Again, if I comment out the swap, giving the entire slice to ZFS and then write the bootloader to "${TARGETDISK}"s1a, run the script, everything works.

I have also tested creating 2 slices, like this:

gpart create -s mbr "${TARGETDISK}"
gpart add -s 3G -t freebsd "${TARGETDISK}"
gpart create -s BSD "${TARGETDISK}"s1
gpart add -t freebsd-swap "${TARGETDISK}"s1

gpart add -t freebsd "${TARGETDISK}"
gpart create -s BSD "${TARGETDISK}"s2
gpart add -t freebsd-zfs "${TARGETDISK}"s2

gpart set -a active -i 2 "${TARGETDISK}"
gpart bootcode -b /mnt2/boot/boot0 "${TARGETDISK}"

and later:

dd if=/mnt2/boot/zfsboot of=/dev/"${TARGETDISK}"s2 count=1
dd if=/mnt2/boot/zfsboot of=/dev/"${TARGETDISK}"s2a skip=1 seek=1024

Putting the swap into it's own slice and then putting FreeBSD into it's own slice works. So WTF, why can't they both coexist in 1 slice if the swap comes first?