Solved Intel Wi-Fi 6 AX201 Wi-Fi network can't work in freebsd 14

[Rock]

You can ride the china wall. How is the laptop set on language?

 

[fff2024g]

You can ride the china wall. How is the laptop set on language?

dear rock. i can't get ride the wall. the laptop use english and chinese.do you have some way ?

 

[Rock]

I only can say to try ndisgen.

 

[thutuid]

I am currently having difficulty getting an AX200 to function in FreeBSD 14.0 which was previously working in 13.2. The problem fff2024g is having may be more than a configuration problem on his part. Several bug reports reference chips with similar model numbers.

273620 – (iwlwifi) iwlwifi meta-bug

bugs.freebsd.org

 

[thutuid]

I only can say to try ndisgen.

I think this is an old method. The workaround I see people recommending is to install wifibox. It creates a Linux virtual machine to operate the wifi adapter on behalf of the host.

 

[Rock]

I think this is an old method. The workaround I see people recommending is to install wifibox. It creates a Linux virtual machine to operate the wifi adapter on behalf of the host.

Not as old as unix. Dear fff2024g, get a usb stick for WiFi. I have 2.
I used then in 12.2 and now in 13.1 after the Intel chip or whatever in my lenovo 520 died.

 

[Perceval]

Doesn't FreeBSD allow to load Windows drivers ?
I've seen this in the handbook.

 

[Rock]

Only if Gates is present.

 

[LibreQuest]

Doesn't FreeBSD allow to load Windows drivers ?
I've seen this in the handbook.

Yes, ndisgen is the program but it's only compatible with drivers for Windows systems that are no longer supported I believe. It's better to just purchase a supported wifi chip set internal or external.

https://github.com/freebsd/freebsd-src/blob/master/usr.sbin/ndiscvt/ndisgen.sh

 

[astyle]

Intel-branded stuff should work with the iwlwifi driver, but as things stand now, FreeBSD's network stack supports G-speeds, not AX-speeds. Most of the time, the bandwidth rating doesn't really matter, though - just because the card is AX, it means nothing, the bottleneck is elsewhere along the wiry pathway.

 

[fff2024g]

I am currently having difficulty getting an AX200 to function in FreeBSD 14.0 which was previously working in 13.2. The problem fff2024g is having may be more than a configuration problem on his part. Several bug reports reference chips with similar model numbers.

273620 – (iwlwifi) iwlwifi meta-bug

bugs.freebsd.org

thanks，i think that is freebsd bug。

 

[fff2024g]

Configure the wireless interface
Register all your SSID in /etc/wpa_supplicant.conf:

network={
ssid="My_Home_Network" # Here is your SSID
scan_ssid=0
psk="AZERTYUIOP" # Here is you WiFi password
priority=1
}
# The following is needed for open WiFi networks
network={
priority=0
key_mgmt=NONE
}
Enable the wpa_supplicant service by adding the following in the /etc/rc.conf file

# Enable wpa supplicant the service
wpa_supplicant_enable="YES"
# Name the wireless interface `wlan0`
wlans_iwlwifi0="wlan0"
Configure the wlan0 interface

ifconfig_wlan0="WPA SYNCDHCP"
defaultrouter="192.168.1.1"
Start the wpa_supplicant service

service wpa_supplicant start


when you configure inter ax201 , it will work in freebsd 14.

 

[Rock]

Configure the wireless interface
Register all your SSID in /etc/wpa_supplicant.conf:

It looks better.

 

[zhao]

Maybe you should disable ifconfig_wlan0_ipv6="inet6 ..." in /etc/rc.conf, at least in my laptop is so.

 

[tOsYZYny]

I am interested in this too:

Configure the wireless interface
Register all your SSID in /etc/wpa_supplicant.conf:

network={
ssid="My_Home_Network" # Here is your SSID
scan_ssid=0
psk="AZERTYUIOP" # Here is you WiFi password
priority=1
}
# The following is needed for open WiFi networks
network={
priority=0
key_mgmt=NONE
}
Enable the wpa_supplicant service by adding the following in the /etc/rc.conf file

# Enable wpa supplicant the service
wpa_supplicant_enable="YES"
# Name the wireless interface `wlan0`
wlans_iwlwifi0="wlan0"
Configure the wlan0 interface

ifconfig_wlan0="WPA SYNCDHCP"
defaultrouter="192.168.1.1"
Start the wpa_supplicant service

service wpa_supplicant start


when you configure inter ax201 , it will work in freebsd 14.

Should this work natively in FreeBSD 14? If so, then I won't need to bother with a Linux jail specifically for wifi.

 

[fff2024g]

I am interested in this too:



Should this work natively in FreeBSD 14? If so, then I won't need to bother with a Linux jail specifically for wifi.

yes. it's working natively in freebsd 14-14.1p3.........no need linux.