Not sure how it happened, but after an upgrade from 10.1 to get 10.4, the server boots to an OK prompt and I have to do the following to boot:
I understand I need to install the bootcode to fix, what command would I use? Here is the disk info:
Code:
set currdev=disk0s1a
I understand I need to install the bootcode to fix, what command would I use? Here is the disk info:
Code:
root@www:~ # gpart show
=> 34 419430333 ada0 GPT (200G)
34 417333246 1 freebsd-ufs (199G)
417333280 2097087 - free - (1.0G)
=> 63 41942977 ada1 MBR (20G)
63 41929587 1 freebsd [active] (20G)
41929650 13390 - free - (6.5M)
=> 0 41929587 ada1s1 BSD (20G)
0 1024000 1 freebsd-ufs (500M)
1024000 524288 2 freebsd-swap (256M)
1548288 20480000 4 freebsd-ufs (9.8G)
22028288 19901299 5 freebsd-ufs (9.5G)
root@www:~ # cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass
/dev/ada1s1b none swap sw 0 0
/dev/ada1s1a / ufs rw 1 1
/dev/ada1s1d /usr ufs rw 2 2
/dev/ada1s1e /var ufs rw 2 2
/dev/ada0p1 /www ufs rw 0 0
/dev/acd0 /cdrom cd9660 ro,noauto 0 0