Here's the output of dmegs of HPE ML30 gen10 (FreeBSD 14.0-RELEASE). It only recognize the Disks in AHCI mode there's no drivers for s100i software raid so it will use ZFS with 2 disks in mirror.
This server will going to be used for small OpenVPN server and SMB file shares.
powerd is also working
This server will going to be used for small OpenVPN server and SMB file shares.
# dmesg
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) E-2124 CPU @ 3.30GHz (3300.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x2000c04<RSBA>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33174188032 (31637 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPE Server >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 3 1 2
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x6e2cc000-0x6e2cc01e
smbios0: Version: 3.1, BCD Revision: 3.1
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HPE Server>
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
acpi_syscontainer0: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x80100000-0x8010ffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x80110000-0x80111fff,0x80114000-0x801140ff,0x80113000-0x801137ff at device 23.0 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 27.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 27.2 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 27.4 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
vgapci0: <VGA-compatible display> mem 0x84000000-0x84ffffff,0x85b98000-0x85b9bfff,0x85000000-0x857fffff at device 0.1 numa-domain 0 on pci5
vgapci0: Boot video device
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x85b9c000-0x85b9c0ff at device 0.4 numa-domain 0 on pci5
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 28.1 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
bge0: <HPE Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0x80030000-0x8003ffff,0x80040000-0x8004ffff,0x80050000-0x8005ffff at device 0.0 numa-domain 0 on pci6
bge0: APE FW version: NCSI v1.5.42.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 08:f1:ea:b2:36:30
bge1: <HPE Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0x80000000-0x8000ffff,0x80010000-0x8001ffff,0x80020000-0x8002ffff at device 0.1 numa-domain 0 on pci6
bge1: APE FW version: NCSI v1.5.42.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 08:f1:ea:b2:36:31
pcib7: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 28.3 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <serial bus> at device 31.5 (no driver attached)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
ns8250: UART FCR is broken
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate_intel0: <Intel Speed Shift> numa-domain 0 on cpu0
hwpstate_intel1: <Intel Speed Shift> numa-domain 0 on cpu1
hwpstate_intel2: <Intel Speed Shift> numa-domain 0 on cpu2
hwpstate_intel3: <Intel Speed Shift> numa-domain 0 on cpu3
Timecounter "TSC-low" frequency 1656009054 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.1: <(0x103c) EHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus1
uhub0: <(0x103c) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub1 numa-domain 0 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5002ABYS-02B1B0 02.03B03> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WCASYA681846
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD5003ABYX-01WERA1 01.01S02> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMAYP5641942
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0
uhub1: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <Microsoft Comfort Curve Keyboard 2000> at usbus0
ukbd0 numa-domain 0 on uhub1
ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <vendor 0x0424 product 0x2660> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 2> on usbus0
Root mount waiting for: usbus0 usbus1
uhub2: 2 ports with 1 removable, self powered
uhub0: 8 ports with 8 removable, self powered
pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000006000-0x4000006fff at device 18.0 numa-domain 0 on pci0
driver bug: Unable to set devclass (class: atrtc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
lo0: link state changed to UP
bge0: link state changed to DOWN
uhid0 numa-domain 0 on uhub1
uhid0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 1> on usbus0
bge0: link state changed to UP
powerd is also working
load 0%, current freq 1202 MHz ( 0), wanted freq 3300 MHz
load 0%, current freq 1202 MHz ( 0), wanted freq 3300 MHz
load 34%, current freq 1202 MHz ( 0), wanted freq 3300 MHz
load 82%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 12%, current freq 1202 MHz ( 0), wanted freq 6393 MHz
load 4%, current freq 1202 MHz ( 0), wanted freq 6193 MHz
load 0%, current freq 1202 MHz ( 0), wanted freq 5999 MHz
load 15%, current freq 1202 MHz ( 0), wanted freq 5811 MHz
load 10%, current freq 1202 MHz ( 0), wanted freq 5629 MHz
load 0%, current freq 1202 MHz ( 0), wanted freq 5453 MHz
load 0%, current freq 1202 MHz ( 0), wanted freq 5282 MHz
load 0%, current freq 1202 MHz ( 0), wanted freq 5116 MHz
load 118%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 45%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 55%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 40%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 74%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 91%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 101%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 102%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 105%, current freq 1202 MHz ( 0), wanted freq 6600 MHz
load 97%, current freq 3911 MHz ( 0), wanted freq 6600 MHz
load 104%, current freq 3911 MHz ( 0), wanted freq 6600 MHz
load 105%, current freq 3911 MHz ( 0), wanted freq 6600 MHz
load 114%, current freq 3911 MHz ( 0), wanted freq 6600 MHz
load 98%, current freq 3911 MHz ( 0), wanted freq 6600 MHz
load 100%, current freq 3911 MHz ( 0), wanted freq 6600 MHz