How to mount NTFS partition

B

balanga

gpart show da0

Code: 
=>       63  312581745  da0  MBR  (149G)
         63       1985       - free -  (993K)
       2048    3072000    1  !39  (1.5G)
    3074048  309504000    2  ntfs  [active]  (148G)
  312578048       3760       - free -  (1.8M)

gpart list da0

Code: 
Geom name: da0
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 312581807
first: 63
entries: 4
scheme: MBR
Providers:
1. Name: da0s1
   Mediasize: 1572864000 (1.5G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   rawtype: 39
   length: 1572864000
   offset: 1048576
   type: !39
   index: 1
   end: 3074047
   start: 2048
2. Name: da0s2
   Mediasize: 158466048000 (148G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0
   attrib: active
   rawtype: 7
   length: 158466048000
   offset: 1573912576
   type: ntfs
   index: 2
   end: 312578047
   start: 3074048
Consumers:
1. Name: da0
   Mediasize: 160041885696 (149G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r0w0e0


ntfs-3g /dev/da0s2 /mnt/windows

Code: 
fuse: failed to open fuse device: No such file or directory

What am I doing wrong?
 
Hi, you trying to mount drive to /mnt/windows - I bet you did not made a directory for it (called windows). please make sure that windows directory is created in /mnt.
 
Please check the following below:

1st: Is the fuse kernel module loaded?
2nd: Did you tried a partition instead a slice? (da0p2 instead of da0s2) ( echo /dev/da* may show you all the partitions/slices on this disk)
3rd: (as mentioned above) the directory /mnt/windows exists? and are you running it (the mount command) as root?
 
ab2k said:
Hi, you trying to mount drive to
Code: 
/mnt/windows
- I bet you did not made a directory for it (called windows). please make sure that windows directory is created in /mnt
Click to expand...

I would have made sure about that before posting here :)
 
mseqs said:
Please check the following below:

1st: Is the fuse kernel module loaded?
2nd: Did you tried a partition instead a slice? (da0p2 instead of da0s2) ( echo /dev/da* may show you all the partitions/slices on this disk)
3rd: (as mentioned above) the directory /mnt/windows exists? and are you running it (the mount command) as root?
Click to expand...

Actually , I came across this thread 317753 earlier which shed light on the problem. Indeed it was the absence of the fuse kernel module.
 
Hi again. Ahh, good, thank you. Asked it just because that it's a top 1 error while mounting ;)

1. check that you have loaded a fuse module kldload fuse
2. if you want it to be run at system start add corresponding line to /boot/loader.conf (don't remember a line actually)
Code: 
fuse_load="YES"
or
fusefs_load="YES"
please consult a man page for a fuse to get correct line for a /boot/loader.conf
 
Hi,

kldload fuse is to load a module in working system.

line with
Code: 
fuse_load="YES"
(need to check it's name - it can be fuse or fusefs) must be added to /boot/loader.conf to load a module automatically at system start, if it's needed. Don't have any machine handly with a fuse installed.
 
I have the same problem

The fuse module is loaded
Code: 
kldload: can't load fuse: module already loaded or in kernel

I know I'm trying to mount the correct partition:
Code: 
gpart show ada1
=>  63  1953525105  ada1  MBR  (932G)
  63  125836641  2  freebsd  [active]  (60G)
  125836704  441  - free -  (221K)
  125837145  1827682920  1  ntfs  (872G)
  1953520065  5103  - free -  (2.5M)

but
Code: 
mount -t ntfs /dev/ada1s1 /I
mount: /dev/ada1s1: Operation not supported by device

Nothing in /var/log/messages after loading fuse.

I didn't have this problem before upgrading to 10.
 
I am having a similar problem. 12.0-CURRENT. There is no mount_ntfs, no ntfs_3g ,etc. Windows and Debian both see the filesystem just fine, so I know it is OK, but I don't seem to have the utilities to mount it.
kldload: can't load fuse: module already loaded or in kernel
Code: 
 # gpart show da0
=>        63  1953529793  da0  MBR  (932G)
          63  1953520002    1  ntfs  (932G)
  1953520065        9791       - free -  (4.8M)

# gpart list da0
Geom name: da0
modified: false
state: OK
fwheads: 255
fwsectors: 63
last: 1953529855
first: 63
entries: 4
scheme: MBR
Providers:
1. Name: da0s1
   Mediasize: 1000202241024 (932G)
   Sectorsize: 512
   Stripesize: 0
   Stripeoffset: 32256
   Mode: r0w0e0
   rawtype: 7
   length: 1000202241024
   offset: 32256
   type: ntfs
   index: 1
   end: 1953520064
   start: 63
Consumers:
1. Name: da0
   Mediasize: 1000207286272 (932G)
   Sectorsize: 512
   Mode: r0w0e0
# locate ntfs-3g
#
So - what's next?
 
You must log in or register to reply here.
Back
Top