Hi everyone. I want to use my USB microphone in video calls.
Output of usbconfig:
Output of cat /dev/sndstat (it seems that pcm6 is my microphone; pcm7 is the microphone of my webcam):
In my /boot/loader.conf I have this:
In my /etc/rc.conf I have this:
In my /etc/sysctl.conf I have this:
Output of mixer when using speakers (sysctl hw.snd.default_unit=4):
Output of mixer when using headphones (sysctl hw.snd.default_unit=5):
It seems that pcm6 is my USB microphone, so I run mixer after change to it:
Oh, it's set to 0! Let's change this:
When manually selecting the microphone in Audacity (selecting pcm6), sometimes it crashes, sometimes it works (but I can't hear anything in the program, only creating a file and listening using a music player).
In WebRTC services like jit.si or appear.in, sometimes microphone can't be detected, sometimes my friend don't hear any sound at all.
Thanks in advance. ^^
Output of usbconfig:
Code:
ugen0.4: <Raysound Krom Kimu> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
Output of cat /dev/sndstat (it seems that pcm6 is my microphone; pcm7 is the microphone of my webcam):
Code:
pcm4: <Realtek ALC892 (Rear Analog)> (play/rec) default
pcm5: <Realtek ALC892 (Front Analog)> (play/rec)
pcm6: <USB audio> (rec)
pcm7: <USB audio> (rec)
In my /boot/loader.conf I have this:
Code:
snd_driver_load="YES"
In my /etc/rc.conf I have this:
Code:
dbus_enable="YES"
hald_enable="YES"
mixer_enable="YES"
In my /etc/sysctl.conf I have this:
Code:
dev.pcm.0.play.vchans=4
dev.pcm.0.rec.vchans=4
hw.snd.maxautovchans=4
Output of mixer when using speakers (sysctl hw.snd.default_unit=4):
Code:
Mixer vol is currently set to 50:50
Mixer pcm is currently set to 100:100
Mixer speaker is currently set to 74:74
Mixer line is currently set to 1:1
Mixer mic is currently set to 67:67
Mixer mix is currently set to 74:74
Mixer rec is currently set to 35:35
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 100:100
Recording source: mic
Output of mixer when using headphones (sysctl hw.snd.default_unit=5):
Code:
Mixer vol is currently set to 50:50
Mixer pcm is currently set to 100:100
Mixer rec is currently set to 50:50
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 100:100
Mixer monitor is currently set to 67:67
Recording source: monitor
It seems that pcm6 is my USB microphone, so I run mixer after change to it:
Code:
# sysctl hw.snd.default_unit=6
# mixer
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer mic is currently set to 0:0
Oh, it's set to 0! Let's change this:
Code:
# mixer mic 50
Setting the mixer mic from 0:0 to 50:50.
# mixer
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer mic is currently set to 50:50
When manually selecting the microphone in Audacity (selecting pcm6), sometimes it crashes, sometimes it works (but I can't hear anything in the program, only creating a file and listening using a music player).
In WebRTC services like jit.si or appear.in, sometimes microphone can't be detected, sometimes my friend don't hear any sound at all.
Thanks in advance. ^^