Gnome 2.24 install error

mfaridi · Jan 28, 2009

I use FreeBSD 7 and before use Gnome 2.12 and I want install new gnome , so I go to

Code:

/usr/ports/x11/gnome2

and type
make deinstall clean

after that I type

make install clean and install many packages

but when it want install

Code:

evolution-exchange

it can not and I see this error

Code:

-a11y.so /usr/local/lib/evolution/2.24/libeutil.so /usr/local/lib/libcamel-provider-1.2.so /usr/local/lib/libgtkhtml-editor.so /usr/local/lib/libgtkhtml-3.14.so /usr/local/lib/libenchant.so /usr/local/lib/libgnomeui-2.so /usr/local/lib/libjpeg.so /usr/local/lib/libbonoboui-2.so /usr/local/lib/libSM.so /usr/local/lib/libICE.so /usr/local/lib/libgnomecanvas-2.so /usr/local/lib/libgailutil.so /usr/local/lib/libart_lgpl_2.so /usr/local/lib/libedataserverui-1.2.so /usr/local/lib/libebook-1.2.so /usr/local/lib/libcamel-1.2.so -lnss3 -lsmime3 -lssl3 /usr/local/lib/libsqlite3.so /usr/local/lib/libheimntlm.so /usr/local/lib/libhx509.so /usr/local/lib/libXcomposite.so /usr/local/lib/libpixman-1.so /usr/local/lib/libglitz.so /usr/local/lib/libxcb-render-util.so /usr/local/lib/libxcb-render.so /usr/local/lib/libxcb.so /usr/local/lib/libebackend-1.2.so -ldb41 /usr/local/lib/libexchange-storage-1.2.so /usr/local/lib/libgssapi.so /usr/local/lib/libkrb5.so /usr/local/lib/libasn1.so /usr/local/lib/libroken.so -lcrypt -lcom_err /usr/local/lib/libedataserver-1.2.so -lplds4 -lplc4 -lnspr4 /usr/local/lib/libglade-2.0.so /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so /usr/local/lib/libatk-1.0.so /usr/local/lib/libgdk_pixbuf-2.0.so /usr/local/lib/libpangocairo-1.0.so /usr/local/lib/libXinerama.so /usr/local/lib/libXi.so /usr/local/lib/libXrandr.so /usr/local/lib/libXext.so /usr/local/lib/libXcursor.so /usr/local/lib/libXdamage.so /usr/local/lib/libcairo.so -lpng /usr/local/lib/libXrender.so /usr/local/lib/libpangoft2-1.0.so /usr/local/lib/libpango-1.0.so /usr/local/lib/libfontconfig.so /usr/local/lib/libfreetype.so /usr/local/lib/libexpat.so /usr/local/lib/libXfixes.so /usr/local/lib/libX11.so /usr/local/lib/libXau.so /usr/local/lib/libXdmcp.so -lrpcsvc /usr/local/lib/libgnome-2.so /usr/local/lib/libgnomevfs-2.so /usr/local/lib/libdbus-glib-1.so /usr/local/lib/libavahi-glib.so /usr/local/lib/libavahi-client.so /usr/local/lib/libavahi-common.so -lssp -lutil /usr/local/lib/libesd.so /usr/local/lib/libaudiofile.so /usr/local/lib/libpopt.so /usr/local/lib/libbonobo-2.so /usr/local/lib/libbonobo-activation.so /usr/local/lib/libORBitCosNaming-2.so /usr/local/lib/libgconf-2.so /usr/local/lib/libORBit-2.so /usr/local/lib/libgnome-keyring.so /usr/local/lib/libdbus-1.so /usr/local/lib/libldap.so -lssl -lcrypto /usr/local/lib/liblber.so /usr/local/lib/libtasn1.so /usr/local/lib/libsoup-2.4.so /usr/local/lib/libgthread-2.0.so -pthread /usr/local/lib/libxml2.so -lm /usr/local/lib/libgnutls.so -lz /usr/local/lib/libgcrypt.so /usr/local/lib/libgpg-error.so /usr/local/lib/libgio-2.0.so /usr/local/lib/libgobject-2.0.so /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libglib-2.0.so -licui18n /usr/local/lib/libintl.so /usr/local/lib/libiconv.so /usr/local/lib/libpcre.so    -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,/usr/local/lib/evolution/2.24 -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,/usr/local/lib/evolution/2.24
/usr/bin/ld: warning: libkrb5.so.9, needed by /usr/local/lib/libexchange-storage-1.2.so, may conflict with libkrb5.so.23
/usr/lib/libkrb5.so.9: undefined reference to `copy_octet_string'
gmake[2]: *** [evolution-exchange-storage] Error 1
gmake[2]: Leaving directory `/usr/ports/mail/evolution-exchange/work/evolution-exchange-2.24.3/storage'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/mail/evolution-exchange/work/evolution-exchange-2.24.3'
gmake: *** [all] Error 2
*** Error code 2

Stop in /usr/ports/mail/evolution-exchange.
*** Error code 1

Stop in /usr/ports/x11/gnome2.
*** Error code 1

Stop in /usr/ports/x11/gnome2.

I do not want install this package and I want let gnome install continue and go work good
what I must do ?

ale · Jan 28, 2009

I would suggest you to install the x11/gnome2-lite metaport, which install less packages than the full gnome2.
When you are done, you can cd to gnome2 metaport directory, type make missing to see if there are other ports from the full gnome2 you want to install.

mfaridi · Jan 28, 2009

but I want solve this problem

ale · Jan 28, 2009

I gave you a way to have evolution-exchange not installed.

About the error, do you have heimdal installed?

mfaridi · Jan 28, 2009

ale said:
I gave you a way to have evolution-exchange not installed.

About the error, do you have heimdal installed?

I deinstall and install heimdal and after but I see that error again

I think it need KRB and I install this package but it conflict with heimdal and I delete heimdal , but I see error again.

ale · Jan 28, 2009

I suppose that you have no installed packages depending on heimdal, have you?
It should pick kerberos from base system, there should be no need to install a package.*
Did you tried running make clean in the port directory?

* Don't you have /usr/lib/libkrb5.so.9 ?

mfaridi · Jan 28, 2009

ale said:
I suppose that you have no installed packages depending on heimdal, have you?
It should pick kerberos from base system, there should be no need to install a package.*
Did you tried running make clean in the port directory?

* Don't you have /usr/lib/libkrb5.so.9 ?

I have libkrb5.so.9

mfaridi · Jan 28, 2009

there is no answer ?
I am between earth and sky right now

ale · Jan 28, 2009

You didn't answered to my first question (last post).
Do you still have krb5 port installed?
What after removing it?

mfaridi · Jan 29, 2009

ale said:
You didn't answered to my first question (last post).
Do you still have krb5 port installed?
What after removing it?

when I type

Code:

pkg_info | grep krb5

it dose not show anything so I think I do not have this package

mfaridi · Jan 29, 2009

I had

Code:

heimdal

and deinstall it from port but I see that error again , but right now I see this error

Code:

PRECATED -MT camel-stub.lo -MD -MP -MF .deps/camel-stub.Tpo -c camel-stub.c -o camel-stub.o >/dev/null 2>&1
mv -f .deps/camel-stub.Tpo .deps/camel-stub.Plo
/bin/sh /usr/ports/mail/evolution-exchange/work/gnome-libtool --tag=CC   --mode=link cc  -O2 -fno-strict-aliasing -pipe -DLDAP_DEPRECATED   -avoid-version -module  -L/usr/local/lib -o libcamelexchange.la -rpath /usr/local/lib/evolution-data-server-1.2/camel-providers camel-exchange-folder.lo camel-exchange-provider.lo camel-exchange-journal.lo camel-exchange-search.lo camel-exchange-store.lo camel-exchange-summary.lo camel-exchange-transport.lo camel-stub-marshal.lo camel-stub.lo -L/usr/local/lib -lldap -llber  -Wl,-R/usr/local/lib/evolution/2.24 -pthread -L/usr/local/lib -L/usr/local/lib/evolution/2.24 -leshell -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lart_lgpl_2 -ledataserverui-1.2 -lglade-2.0 -lebook-1.2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lcairo -lpangoft2-1.0 -lX11 -lXfixes -lpango-1.0 -lm -lfreetype -lz -lfontconfig -lgnome-2 -lpopt -ledataserver-1.2 -lxml2 -lgconf-2 -lbonobo-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lebackend-1.2 -lexchange-storage-1.2 -lsoup-2.4 -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0   -Wl,-R/usr/local/lib/evolution/2.24 -pthread -L/usr/local/lib/evolution/2.24 -L/usr/local/lib -leshell -leutil -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lart_lgpl_2 -ledataserverui-1.2 -ledata-book-1.2 -lebook-1.2 -ledata-cal-1.2 -lebackend-1.2 -lecal-1.2 -lgnome-2 -lpopt -lglade-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lcairo -lpangoft2-1.0 -lX11 -lXfixes -lpango-1.0 -lm -lfreetype -lz -lfontconfig -lcamel-provider-1.2 -lcamel-1.2 -ledataserver-1.2 -lsqlite3 -lxml2 -lgconf-2 -lsoup-2.4 -lbonobo-2 -lgio-2.0 -lbonobo-activation -lgmodule-2.0 -lORBit-2 -lgthread-2.0 -lgobject-2.0 -lglib-2.0    -pthread 
grep: /usr/local/lib/libgssapi.la: No such file or directory
sed: /usr/local/lib/libgssapi.la: No such file or directory
gnome-libtool: link: `/usr/local/lib/libgssapi.la' is not a valid libtool archive
gmake[2]: *** [libcamelexchange.la] Error 1
gmake[2]: Leaving directory `/usr/ports/mail/evolution-exchange/work/evolution-exchange-2.24.3/camel'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/mail/evolution-exchange/work/evolution-exchange-2.24.3'
gmake: *** [all] Error 2
*** Error code 2

Stop in /usr/ports/mail/evolution-exchange.
*** Error code 1

Stop in /usr/ports/x11/gnome2.
*** Error code 1

Stop in /usr/ports/x11/gnome2.

what I must do right now ?

mfaridi · Jan 29, 2009

Please someone guide me what I must do ?

ale · Jan 29, 2009

Did you forced the removal of heimdal?
Do you have NO_KERBEROS defined e.g. in /etc/make.conf?
Does pkgdb -fF run without errors or warnings?

mfaridi · Jan 31, 2009

ale said:
Did you forced the removal of heimdal?
Do you have NO_KERBEROS defined e.g. in /etc/make.conf?
Does pkgdb -fF run without errors or warnings?

I do not have No_KERBEROS in/etc/make.conf
I remove heimdal with make deinstall clean
I do not use pkgdb-fF

ale · Feb 1, 2009

Were you able to solve?
Have a look at [thread=1901]this thread[/thread].

mfaridi · Feb 2, 2009

ale said:
Were you able to solve?
Have a look at [thread=1901]this thread[/thread].

Thanks many many
you link help many and I can install gnome-panel

but when I want install gnome-control-center I see this error and I think I need gss

Code:

onf-2 -lsoup-2.4 -lbonobo-2 -lgio-2.0 -lbonobo-activation -lgmodule-2.0 -lORBit-2 -lgthread-2.0 -lgobject-2.0 -lglib-2.0   -lintl
mkdir .libs
libtool: link: cannot find the library `/usr/local/lib/libgssapi.la' or unhandled argument `/usr/local/lib/libgssapi.la'
gmake[3]: *** [gnome-about-me] Error 1
gmake[3]: Leaving directory `/usr/ports/sysutils/gnome-control-center/work/gnome-control-center-2.24.0.1/capplets/about-me'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/usr/ports/sysutils/gnome-control-center/work/gnome-control-center-2.24.0.1/capplets'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/sysutils/gnome-control-center/work/gnome-control-center-2.24.0.1'
gmake: *** [all] Error 2
*** Error code 2

thanks again for your help about gnome-panel

ale · Feb 2, 2009

I'd try running

Code:

pkg_info -Rx heimdal
pkg_info -Rx krb5

What it the output?

mfaridi · Feb 2, 2009

ale said:
I'd try running

Code:

pkg_info -Rx heimdal pkg_info -Rx krb5

What it the output?

if I run pkg_info -Rx krb5
I see this

Code:

pkg_info: no packages match pattern(s)

but when I run pkg_info -R krb5

I see this

Code:

pkg_info: can't find package 'krb5' installed or in a file!

this is happen for heimdal

ale · Feb 2, 2009

Can you show the output of $ locate gssapi.h | xargs ls ?

mfaridi · Feb 2, 2009

ale said:
Can you show the output of $ locate gssapi.h | xargs ls ?

This is output

Code:

/usr/include/gssapi.h							/usr/src/contrib/bind9/lib/dns/include/dst/gssapi.h
/usr/include/gssapi/gssapi.h						/usr/src/contrib/cvs/lib/xgssapi.h
/usr/local/include/evolution-data-server-2.24/camel/camel-sasl-gssapi.h	/usr/src/crypto/heimdal/lib/gssapi/gssapi.h
/usr/local/share/doc/cyrus-sasl2/html/gssapi.html			/usr/src/include/gssapi.h
/usr/ports/www/firefox3/work/mozilla/extensions/auth/gssapi.h		/usr/src/include/gssapi/gssapi.h

ale · Feb 2, 2009

Can you run

Code:

cd /usr/ports/sysutils/gnome-control-center
make clean && make configure | tee ~/GCC_CFG_OUT && make clean
find /usr/local -type f | xargs pkg_which -v | fgrep '?' | tee ~/PKGWHICH

The last command will take a while.
You'll find two files on your home dir: GCC_CFG_OUT and PKGWHICH.
Compress them with bzip2/gzip/zip and add them as attachment.

mfaridi · Feb 2, 2009

ale said:
Can you run

Code:

cd /usr/ports/sysutils/gnome-control-center make clean && make configure | tee ~/GCC_CFG_OUT && make clean find /usr/local -type f | xargs pkg_which -v | fgrep '?' | tee ~/PKGWHICH

The last command will take a while.
You'll find two files on your home dir: GCC_CFG_OUT and PKGWHICH.
Compress them with bzip2/gzip/zip and add them as attachment.

I do that and this output
it take long time

mfaridi · Feb 3, 2009

This is my

pkg_version -l "<"

I attach it

ericbsd · Feb 16, 2009

this is my error i need to reinstall some package i dont seek them

checking for EVOLUTION_DATA_SERVER... configure: error: Package requirements (libebook-1.2 >= 2.23.90
libecal-1.2 >= 2.23.90
libedataserver-1.2 >= 2.23.90
libedataserverui-1.2 >= 2.23.90
libegroupwise-1.2 >= 2.23.90
libebackend-1.2 >= 2.23.90
libexchange-storage-1.2 >= 2.23.90) were not met:

Requested 'libebook-1.2 >= 2.23.90' but version of libebook is 2.22.3
Requested 'libecal-1.2 >= 2.23.90' but version of libecal is 2.22.3
Requested 'libedataserver-1.2 >= 2.23.90' but version of libedataserver is 2.22.3
Requested 'libedataserverui-1.2 >= 2.23.90' but version of libedataserverui is 2.22.3
Requested 'libegroupwise-1.2 >= 2.23.90' but version of libegroupwise is 2.22.3
gnome-config: not found
No package 'libebackend-1.2' found
Requested 'libexchange-storage-1.2 >= 2.23.90' but version of libexchange is 2.22.3

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables EVOLUTION_DATA_SERVER_CFLAGS
and EVOLUTION_DATA_SERVER_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

===> Script "configure" failed unexpectedly.
Please run the gnomelogalyzer, available from
"http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the
problem and suggest a solution. If - and only if - the gnomelogalyzer cannot
solve the problem, report the build failure to the FreeBSD GNOME team at
gnome@FreeBSD.org, and attach (a)
"/usr/ports/mail/evolution-exchange/work/evolution-exchange-2.24.4/config.log",
(b) the output of the failed make command, and (c) the gnomelogalyzer output.
Also, it might be a good idea to provide an overview of all packages installed
on your system (i.e. an `ls /var/db/pkg`). Put your attachment up on any
website, copy-and-paste into http://freebsd-gnome.pastebin.com, or use
send-pr(1) with the attachment. Try to avoid sending any attachments to the
mailing list (gnome@FreeBSD.org), because attachments sent to FreeBSD mailing
lists are usually discarded by the mailing list software.
*** Error code 1

Stop in /usr/ports/mail/evolution-exchange.
*** Error code 1

Stop in /usr/ports/mail/evolution-exchange.
corpse#

ericbsd · Feb 16, 2009

i resolve that

Gnome 2.24 install error

mfaridi

ale

mfaridi

ale

mfaridi

ale

mfaridi

mfaridi

ale

mfaridi

mfaridi

mfaridi

ale

mfaridi

ale

mfaridi

ale

mfaridi

ale

mfaridi

ale

mfaridi

Attachments

mfaridi

Attachments

ericbsd

ericbsd