I've got 3 computers all 8.1 that I use gconcat on but one is giving me fits.
I can setup the storage and write files to it but on reboot it all goes away.
I can setup the storage and write files to it but on reboot it all goes away.
Code:
cpq# kldload geom_concat
kldload: can't load geom_concat: File exists
cpq# gconcat list data
gconcat: No such geom: data.
cpq# gconcat create -v data /dev/ad1 /dev/ad2 /dev/ad3
Done.
cpq# newfs /dev/concat/data
/dev/concat/data: 22922.6MB (46945584 sectors) block size 16384, fragment size 2048
using 125 cylinder groups of 183.77MB, 11761 blks, 23552 inodes.
super-block backups (for fsck -b #) at:
160, 376512, 752864 <snip-snip> 46291456, 46667808
cpq# mount /dev/concat/data /data
cpq# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s1a 334M 239M 68M 78% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/ad0s1e 254M 16K 233M 0% /tmp
/dev/ad0s1f 4.1G 1.2G 2.6G 32% /usr
/dev/ad0s1d 427M 96M 297M 24% /var
linprocfs 4.0K 4.0K 0B 100% /usr/compat/linux/proc
/dev/concat/data 22G 4.0K 20G 0% /data
cpq# reboot
Connection to 10.10.1.113 closed by remote host.
Connection to 10.10.1.113 closed.
> ssh 10.10.1.113
Password:
> gconcat list data
gconcat: No such geom: data.
This is from /var/log/messages before reboot.
Aug 30 16:14:48 cpq kernel: GEOM_CONCAT: Device data created (id=4168446272).
Aug 30 16:14:48 cpq kernel: GEOM_CONCAT: Disk ad1 attached to data.
Aug 30 16:14:48 cpq kernel: GEOM_CONCAT: Disk ad2 attached to data.
Aug 30 16:14:48 cpq kernel: GEOM_CONCAT: Disk ad3 attached to data.
Aug 30 16:14:48 cpq kernel: GEOM_CONCAT: Device data activated.