Hi mates, I'm Isaac from Spain.
This is my FreeNAS:
Placa Base: Gigabyte GA-M720-US3 Socket AM2+
Procesador: AMD Sempron LE-140 2.7Ghz AM3 Box
Memory Ram: 2x Kingston ValueRam 1GB DDR2 800
Box: Sharkoon rebel9
backplane: x1 sata backplane
HDD: x4 Samsung F3 EcoGreen 2TB 32MB 5400RPM.
CF: 2GB
FreeNAS: FreeBSD 7.2 - 0.71 shere (revision5127)
I built 5 months ago a raidz ZFS pool with about 5,3 tb, and in this months everything works fine, but yesterday afternoon the system I don't know why, will restart and restart and restart again and no show the webgui. What happened?
Well, I connected the monitor and the keyboard to see what happened, a I saw this I show you in the picture.
I problem says that:
I have 4 HDDs in a backplane, and I tried to swith off one HDD every time, to check if the FreeNAS start correctly without one of the four HDD, but in the four tests I did, the system didn't start, and the problem still there.
If I switch off all HDDs, the FreeNAS starts correctly as before, but the HDDs are missing, but If I connect the HDD in hot, and I press the button 'rescan', I can see the four HDDs, but if I go to Disc/ZFS/Poll/Admon, I can see my pool named NAS-Isaac-Esther but the status is not available.
I don't know what to do more already, because my knowledge is minimal. One friend of my in other forum that live in the same city as me, told me all the steps I did, But the problem has not been solved. He told me that probably there is a Corruption in the system of files ZFS. Probably.
I don't know what to do more and I need help to save my personal data that is inside my pool.
Thank you for everything, and I realize that my English is very bad.
Isaac :stud
This is my FreeNAS:
Placa Base: Gigabyte GA-M720-US3 Socket AM2+
Procesador: AMD Sempron LE-140 2.7Ghz AM3 Box
Memory Ram: 2x Kingston ValueRam 1GB DDR2 800
Box: Sharkoon rebel9
backplane: x1 sata backplane
HDD: x4 Samsung F3 EcoGreen 2TB 32MB 5400RPM.
CF: 2GB
FreeNAS: FreeBSD 7.2 - 0.71 shere (revision5127)
I built 5 months ago a raidz ZFS pool with about 5,3 tb, and in this months everything works fine, but yesterday afternoon the system I don't know why, will restart and restart and restart again and no show the webgui. What happened?
Well, I connected the monitor and the keyboard to see what happened, a I saw this I show you in the picture.
I problem says that:
Code:
panic: solaris assert: dmu_read(os, smo->smo_object, offset, size, entry_map) == 0 (0x2 == 0x0), file:
/usr/src/sys/modules/zfs/../../cddl/contrib/opensolaris/uts/common/fs/zfs/space_map.c, line: 341
cpuid=0
uptime:7s
Cannot dump. No dump device defined
I have 4 HDDs in a backplane, and I tried to swith off one HDD every time, to check if the FreeNAS start correctly without one of the four HDD, but in the four tests I did, the system didn't start, and the problem still there.
If I switch off all HDDs, the FreeNAS starts correctly as before, but the HDDs are missing, but If I connect the HDD in hot, and I press the button 'rescan', I can see the four HDDs, but if I go to Disc/ZFS/Poll/Admon, I can see my pool named NAS-Isaac-Esther but the status is not available.
I don't know what to do more already, because my knowledge is minimal. One friend of my in other forum that live in the same city as me, told me all the steps I did, But the problem has not been solved. He told me that probably there is a Corruption in the system of files ZFS. Probably.
I don't know what to do more and I need help to save my personal data that is inside my pool.
Thank you for everything, and I realize that my English is very bad.
Isaac :stud