Hi! I'm running a FreeNAS-server with FreeBSD 7.3-RELEASE-p4 (revision 199506) on.
I have a RAID-Z array setup with 4 x 1Tb disks. After removing one of them, for using in another computer. I started my Freenas up, believing that it still would be accesible with the 3 disks left in the pool. It starts up, and then gets accesible for lets say 5 min in a degraded state, then it seems to freeze. U can reach it through booth GUI and SSH, but the ZFS-part seems to be unaccesible after a little while. Have tried the ZFS command "replace", putting the old disk back without any success. How do I manage to get the pool up again. It doesnt seem to be that easy that I thought it would be...
edit
After re-attaching the missing disk again, I manage to start resilvering the missing disk with command "replace". I removed the existing partition, that was still left on the disk, and this seemed to help, but the problem still remains with the system freezing (incl. the resilveringprocess) after about 5 min. I can still connect with the Freenas with booth SSH, and web-GUI, but anything that has to do with the ZFS-system seems unreachable....?
edit nr 2
Moved the 4 disks to new hardware - the same problem ocurs - system freezes after about 5 min while resilvering...a systembug? How am I suppose to solve this...anyone here wanna help me out?
All help really appreciated!Here's a printout of the info on the screen when sending the command "ZPOOL STATUS"
I have a RAID-Z array setup with 4 x 1Tb disks. After removing one of them, for using in another computer. I started my Freenas up, believing that it still would be accesible with the 3 disks left in the pool. It starts up, and then gets accesible for lets say 5 min in a degraded state, then it seems to freeze. U can reach it through booth GUI and SSH, but the ZFS-part seems to be unaccesible after a little while. Have tried the ZFS command "replace", putting the old disk back without any success. How do I manage to get the pool up again. It doesnt seem to be that easy that I thought it would be...
edit
After re-attaching the missing disk again, I manage to start resilvering the missing disk with command "replace". I removed the existing partition, that was still left on the disk, and this seemed to help, but the problem still remains with the system freezing (incl. the resilveringprocess) after about 5 min. I can still connect with the Freenas with booth SSH, and web-GUI, but anything that has to do with the ZFS-system seems unreachable....?
edit nr 2
Moved the 4 disks to new hardware - the same problem ocurs - system freezes after about 5 min while resilvering...a systembug? How am I suppose to solve this...anyone here wanna help me out?
All help really appreciated!Here's a printout of the info on the screen when sending the command "ZPOOL STATUS"
Code:
freenas:~# zpool status
pool: Tank
state: DEGRADED
scrub: scrub in progress for 0h1m, 0.56% done, 5h40m to go
config:
NAME STATE READ WRITE CKSUM
Tank DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
replacing UNAVAIL 0 1.22K 0 insufficient replicas
4979939086327812651 REMOVED 0 0 0 was /dev/ad10/old
13839806204951011396 REMOVED 0 0 0 was /dev/ad8
ad12 ONLINE 0 0 0
ad10 ONLINE 0 0 0
ad14 ONLINE 0 0 0
errors: No known data errors
freenas:~#
