FreeBSD on CM3588 (Rockchip) + NAS IO Board?

H

hayzam

Hey all,

Has anyone here successfully gotten FreeBSD up and running on the CM3588 module (RK3588 SoC) paired with the NAS IO Board?

I'm especially interested in hearing if the various ports and interfaces work out of the box, like:
  • 2.5GbE RJ45
  • USB 3.0/2.0 ports
  • M.2 NVMe (PCIe 3.0 x1 x4)
  • GPIO, UART, I2C, etc.
Here’s a quick overview of the carrier board’s hardware spec for reference:
  • Storage: 1 x MicroSD (up to SDR104)
  • Network: 1 x 2.5GbE RJ45
  • USB: 1 x USB 3.0 Type-C (DRP w/ DP support), 2 x USB 3.0 Type-A, 1 x USB 2.0 Type-A
  • PCIe: 4 x M.2 M-Key (PCIe 3.0 x1) for NVMe SSDs
  • Video: HDMI input (4K60), 2 x HDMI outputs (up to 8K60 & 4K60)
  • Audio: 3.5mm headphone out, 2.0mm mic input
  • I/O: GPIO header (40-pin), up to 81 GPIOs, multiple UARTs, SPIs, I2Cs, PWMs
  • Other: RTC, fan, IR receiver, debug UART, several buttons for reset/recovery/etc.
Would love to know:
  1. If you got FreeBSD booting and stable
  2. Which peripherals are working or need patches
  3. Any tips or quirks during setup
Thanks in advance—any insight would be super helpful for planning my build!
 
You must log in or register to reply here.
Back
Top