FreeBSD + geli

Today i decided to try and set GELI for most of my system....
I would like to use it for entire disk, but my PC can't load from USB stick, so i will leave root unencrypted....

you can leave only boot, unencrypted, but i find, that in my situation, leaving root unencrypted is better, because if anything i can boot in single user mode without problem...

So as you know geli ain't supported by sysinstall
recently i broke some things on my box, and i wanted to reinstall bsd, so that's why

Step 0) preparing
backup your data to some safe place

what do you need?
1x PC
1x HDD
FreeBSD CD or already installed freebsd
patience

Step 1) Get FreeBSD on disk
note: if you got BSD on your disk already, then backup your data, and skip this step

I installed bare minimum base and kernel
my disk is detected as ad4
ad4s1a - / - 512M
ad4s1b - swap - about 512M
ad4s2d - /usr - 10G
ad4s2e - /var - 1G
ad4s2f - /tmp - 12G
ad4s2g - /home - about 5G
ad4s3d - /home/files - rest of disk


Step 2) Reboot in single user mode

Backup /usr and /var to other disk/slice (you will need backups later)
Code:
$ kldload geom_eli
$ mount -uo rw /
$ mount -a
$ cd /home/files
$ dump -0Lauf /home/files/usr.dump /usr
$ dump -0Lauf /home/files/var.dump /var
$ dump -0Lauf /home/files/root.dump /
$ cd /
$ umount /usr /var /tmp /home/files /home

now you may want to sanitarize your disk
Code:
$ dd if=/dev/random of=/dev/ad4s2 bs=1m
you can increase bs to speed things up (i use 16m or 8m, as my disk has 16m buffer)

Code:
$ echo > /label
$ bsdlabel -R /dev/ad4s2 /label
this will clear bsdlabels from ad4s2, this means that you no longer will see
/dev/ad4s2d, /dev/ad4s2e, /dev/ad4s2f, /dev/ad4s2g
Q: Why you'd like to do that?
A: Because we are going to encrypt entire slice /dev/ad4s2



Step 3) Initialize GELI
for this one i won't use keyfile, only password
Code:
$ geli init -b -s 4096 /dev/ad4s2
Enter password 2x
$ geli attach /dev/ad4s2
Enter passwod
-b means that password should be asked during boot, so that file systems can be mounted when computer starts
This is important thing, so don't forget to type it

Step 4) Ugly mess with bsdlabel
you won't probably have editor available
that's why i had t use this very UGLY mess
Code:
$ bsdlabel -w /dev/ad4s2.eli
$ bsdlabel -A /dev/ad4s2.eli > label
$ geli detach /dev/ad4s2.eli
and now repeat step 3 one time, and go straight to step 5 (skip step 4)
This is necessary to know what values to enter for bsdlabel
and you need to repeat step 3, because otherwise you will get warning otherwise
yes, it sux

Step 5) Edit bsdlabel
Code:
$ cat /label
you should see something like this:
Code:
# /dev/ad4s2.eli:
2 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  a:  7600751        2    unused        0     0
  c:  7600753        0    unused        0     0         # "raw" part, don't edit
echo line that starts with c:


Code:
$ echo 'c: 7600753 0 unused 0 0' > /label
$ echo 'd: 10G * 4.2BSD' >> /label
$ echo 'e: 1G * 4.2BSD' >> /label
$ echo 'f: 12G * 4.2BSD' >> /label
$ echo 'g: * * 4.2BSD' >> /label
$ bsdlabel -R /dev/ad4s2 /label
This will make partition for /tmp (10G), /var (1G), /tmp (12G), /home (rest)

Step 6) newfs and mount
Code:
$ newfs -U /dev/ad4s2.elid
$ newfs -U /dev/ad4s2.elie
$ newfs -U /dev/ad4s2.elif
$ newfs -U /dev/ad4s2.elig
$ mount /dev/ad4s2.elid /usr
$ mount /dev/ad4s2.elie /var
$ mount /dev/ad4s2.elif /tmp
$ mount /dev/ad4s2.elig /home

Step 7) restore files
Code:
$ mkdir /home/files
$ mount /dev/ad4s3d /home/files
$ cd /usr
$ restore -rf /home/files/usr.dump
$ cd /var
$ restore -rf /home/files/var.dump

Step 8) edit files
you need to edit /etc/fstab
for this, i did
Code:
$ mv /etc/fstab /etc/fstab.bak
$ cat /etc/fstab.bak
and using echo manually wrote new /etc/fstab

fstab




Code:
# Device		Mountpoint	FStype	Options		     Dump Pass#
/dev/ad4s1b		none		swap	sw			0 0
/dev/ad4s1a		/		ufs	rw			1 1
/dev/ad4s2[color="red"].eli[/color]g		/home		ufs	rw			2 2
/dev/ad4s3d		/home/files	ufs	rw			2 2
/dev/ad4s2[color="red"].eli[/color]f		/tmp		ufs	rw,noatime,async	2 2
/dev/ad4s2[color="red"].eli[/color]d		/usr		ufs	rw			2 2
/dev/ad4s2[color="red"].eli[/color]e		/var		ufs	rw			2 2
/dev/acd0		/cdrom		cd9660	ro,noauto		0 0
[I]#I've marked changes in red[/I]


next thing is to load geli during boot, because i'm using generic kernel
Code:
$ echo 'geom_eli_load="YES"'>> /boot/loader.conf

Step 9) reboot
you should be able to reboot in multiuser mode without problems....

Step 10) encrypt swap
turn off swap
Code:
$ swapoff /dev/ad4s1b

again you may want to sanitarize your swap and /dev/ad4s3
Code:
$ dd if=/dev/random of=/dev/ad4s1b bs=1m

Now let's encrypt and mount swap
Code:
$ geli onetime -d -e 3des /dev/ad4s1b
$ swapon /dev/ad4s1b.eli
you need to edit your /etc/fstab
Code:
# Device		Mountpoint	FStype	Options		     Dump Pass#
/dev/ad4s1b[color="red"].eli[/color]		none		swap	sw			0 0
/dev/ad4s1a		/		ufs	rw			1 1
/dev/ad4s2.elig		/home		ufs	rw			2 2
/dev/ad4s3d		/home/files	ufs	rw			2 2
/dev/ad4s2.elif		/tmp		ufs	rw,noatime,async	2 2
/dev/ad4s2.elid		/usr		ufs	rw			2 2
/dev/ad4s2.elie		/var		ufs	rw			2 2
/dev/acd0		/cdrom		cd9660	ro,noauto		0 0
[I]#I've marked changes in red[/I]

you'll also need to add folowing line to you /etc/rc.conf
Code:
geli_swap_flags="-d -e 3des"


Step 11) encrypt /dev/ad4s3
unmount, sanitarize, and clear labels
Code:
$ umount /dev/ad4s3d
$ dd if=/dev/random of=/dev/ad4s3 bs=1m
$ echo > /label
$ bsdlabel -R /dev/ad4s3 /label

make 128bytes key
Code:
$ dd if=/dev/random of=/root/files.key bs=128 count=1

initialize geli (this will use keyfile and password)
I don't want to mount it at boot, so that's why i don't use -b option
Code:
$ geli init -s 4096 -K /root/files.key /dev/ad4s3
enter password 2x
$ geli attach -k /root/files.key /dev/ad4s3
enter password

now, there are 2 choices
a) you can newfs -U /dev/ad4s3.eli and use it as is....
b) you can make labels for /dev/ad4s3.eli (as i understand this is better, but i'm not sure)

Step 11.a)
Code:
$ newfs -U /dev/ad4s3.eli
$ mount /dev/ad4s3.eli /home/files

edit fstab
Code:
# Device		Mountpoint	FStype	Options		     Dump Pass#
/dev/ad4s1b.eli		none		swap	sw			0 0
/dev/ad4s1a		/		ufs	rw			1 1
/dev/ad4s2.elig		/home		ufs	rw			2 2
/dev/ad4s3[color="red"].eli[/color]		/home/files	ufs	rw[color="red"],noauto		0 0[/color]
/dev/ad4s2.elif		/tmp		ufs	rw,noatime,async	2 2
/dev/ad4s2.elid		/usr		ufs	rw			2 2
/dev/ad4s2.elie		/var		ufs	rw			2 2
/dev/acd0		/cdrom		cd9660	ro,noauto		0 0
[I]#I've marked changes in red[/I]

Step 11.b)
do the same thing as in step 4
and the reinitialize geli, for /dev/ad4s3 (step 11), you don't need to generate new key
and then do same thing as in step 5, but
this time you only need to add one label (d: )
Code:
$ echo 'c: 7600753 0 unused 0 0' > /label
$ echo 'd: * * 4.2BSD' >> /label
$ bsdlabel -R /dev/ad4s3.eli /label
$ newfs -U /dev/ad4s3.elid
2nd line, will make sure, that you use all space on slice for label d

now edit fstab
Code:
# Device		Mountpoint	FStype	Options		     Dump Pass#
/dev/ad4s1b.eli		none		swap	sw			0 0
/dev/ad4s1a		/		ufs	rw			1 1
/dev/ad4s2.elig		/home		ufs	rw			2 2
/dev/ad4s3[color="red"].eli[/color]d		/home/files	ufs	rw[color="red"],noauto		0 0[/color
/dev/ad4s2.elif		/tmp		ufs	rw,noatime,async	2 2
/dev/ad4s2.elid		/usr		ufs	rw			2 2
/dev/ad4s2.elie		/var		ufs	rw			2 2
/dev/acd0		/cdrom		cd9660	ro,noauto		0 0
[I]#I've marked changes in red[/I]

Attaching /home/files)
next time you reboot, to attach /home/files as root type:
Code:
$ geli attach -k /root/files.key /dev/ad4s3
enter password
$ mount /home/files

and that seams to be it

NOTE
Don't forget passwords
and don't lose key
keep key in safe place (usb stick perhaps)
make backup for key, just in case
it's possible to leave only /boot unencrypted, but for that you might need another HDD
also it is possible to encrypt entire disk, but then you need usb stick with /boot on it, and pc that can boot from flash

to those who wonder, why swap is encrypted separately?
That's because, i don't need password for swap encryption.
it will use one time encryption... so there is no way to decrypt that
Also if necessary you modify it and use it elsewhere later (for example create d: partion)


Resources
man geli
Handbook 18.16.2
handbook 18.17


I hope this was useful for someone...
if you got questions, ask, i will answer....

and if anyone have better idea, how to avoid, annoying step 4, let me know
 
UPDATE: 1
When you unmount encrypted drive, it will still be accessible (with dd for example)
you need to detach it
Code:
geli detach /dev/ad0s1f.eli

And here's important stuff:
if you use encrypted usb stick.....
don't forget to detach it after you unmount it.....
failing to do so will/may cause panic
this is for everything....
probably including disk images


UPDATE: 2
Carpetsmoker said:
You can also use a image instead of a ``real'' filesystem, for example on FreeBSD:

First create a image, 100MB in this case:

$ dd if=/dev/zero of=secret.img bs=1024K count=100

Next use mdconfig to create a /dev entry:

# mdconfig -at vnode -f secret.img

Next you can follow the normal stept for creating an encrypted filesystem (i.e. Killasmurf's FreeBSD + Geli), using md0.

You can use
# mdconfig -du0
to detach the device.

This is much more flexible and faster, and you can set it up any time, no need to newfs stuff ...

Before you use
Code:
# mdconfig -du0
to detach device (file in this case), as suggested by Carpetsmoker
make sure you use geli detach
Code:
geli detach /dev/md0.eli
For reasons read update 1

UPDATE: 3
At step 4, you my tray to skip geli detach and continue to step 5 and 6, if there are no weird errors (i had some), if you get errors fall back to this guide (in short to step 4,3,5,6...)

so if you get errors do, 1,2,3,4,3,5,6,7,8,9,10,11
if you don't get errors do 1,2,3,4,5,6,7,8,9,10,11

If you feel confused, ignore this update, and pm me (or make post)..... i'll se if i can improve things)



Another good source:
http://bge-tard.blogspot.com/2007/09...on-system.html
 
another guide for geli & zfs

Rink Springer has also posted a nice mini-guide for setting up geli encryption and ZFS with a small unencrypted "/boot" slice. His post is online at his weblog:

http://rink.nu/entry.php?id=105

It's not a comprehensive guide that attempts to cover all the corner-cases or to cater to, say, Eric Raymond's famous aunt, but more like a "braindump". But I liked it a lot ;-)
 
keramida@ said:
Rink Springer has also posted a nice mini-guide for setting up geli encryption and ZFS with a small unencrypted "/boot" slice. His post is online at his weblog:

http://rink.nu/entry.php?id=105

It's not a comprehensive guide that attempts to cover all the corner-cases or to cater to, say, Eric Raymond's famous aunt, but more like a "braindump". But I liked it a lot ;-)

I also found this guide useful. According to the description this document helps getting:

a FreeBSD installation on an AES265 encrypted root filesystem using GELI. In this example 6.2 was used, other version may work similar. To have a complete bootable system on one harddisk, two partitions will be used. A small unecrypted boot partition with the kernel and a second partition which holds the encrypted root filesystem.​

I may give it a try, as one of those mimi-guides says... you never know when an encrypted FS can become handy :)

Keep up he good work guys, thank you killasmurf86!
 
hmm, about editing BSD labels, you can (should be able to) use /rescue/vi (but you need to name direct path or set path variable for executables)
Why didn't i thought of it
 
Back
Top