Hi,
I have an issue with the Matrox driver under the new X.Org. The machine is running FreeBSD 10.0-RELEASE with a GENERIC kernel. I've loaded the MGA kernel module in /boot/loader.conf with
The problem is that the KDE component KDM that runs the kdm_greeter just dies. That is, whether I have
in /etc/rc.conf or I start it by hand with
My X display starts up, the xterm displays and I have no keyboard or mouse, both are USB. I then hit
At this point, my /var/log/Xorg.0.log shows:
At this point, it looks like X is at least starting correctly and exiting correctly. However, I note that it says that there are issues near the end with no DRI support, but I don't know if this is an issue or not. Anyone? Next, I re-initialize both the /var/log/Xorg.log.0 and the /var/log/kdm.log files with a simple
And then the prompt is returned. This is when I get the aforementioned behavior of the greeter popping up and then exiting and bumping me back to the command line on the console. On the console:
The /var/log/kdm.log file shows:
Now, the obvious is that it says no D-Bus session-bus found. However, it's set in /etc/rc.conf along with hald to be on:
And in the process table, with the command
As far as I can tell, the Xorg.0.log file is identical to the previous one. Does anyone have any insight or tutelage on troubleshooting this? I have no idea where the Matrox driver is with regards to the new X.Org stuff.
Thank you,
Paul
I have an issue with the Matrox driver under the new X.Org. The machine is running FreeBSD 10.0-RELEASE with a GENERIC kernel. I've loaded the MGA kernel module in /boot/loader.conf with
Code:
mga_load="yes"
The problem is that the KDE component KDM that runs the kdm_greeter just dies. That is, whether I have
Code:
kdm4_enable="YES"
/usr/local/etc/rc.d/kdm4 start
, the result is the same: the video switches the TTY, the window background starts up and the kdm_greeter shows up. Almost immediately, the whole thing crashes and I'm back at the console. I have no /usr/local/etc/X11/xorg.conf. If I start X, with xinit
, I get a black root window and a black letter on white background xterm. From the command line, I type xinit
and the response is:
Code:
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 10.0-RELEASE amd64
Current Operating System: FreeBSD atlantisservices.net 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 06 March 2014 06:12:28PM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 6 19:13:55 2014
(==) Using default built-in configuration (30 lines)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
My X display starts up, the xterm displays and I have no keyboard or mouse, both are USB. I then hit
ctrl-c
and the server exits and I'm back at the console.
Code:
^Cxinit: connection to X server lost
waiting for X server to shut down xterm: fatal IO error 35 (Resource temporarily unavailable) or KillClient on X server ":0"
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
At this point, my /var/log/Xorg.0.log shows:
Code:
[ 30102.614]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 30102.614] X Protocol Version 11, Revision 0
[ 30102.614] Build Operating System: FreeBSD 10.0-RELEASE amd64
[ 30102.614] Current Operating System: FreeBSD atlantisservices.net 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
[ 30102.614] Build Date: 06 March 2014 06:12:28PM
[ 30102.614]
[ 30102.614] Current version of pixman: 0.32.4
[ 30102.614] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30102.614] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30102.614] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 6 19:46:13 2014
[ 30102.615] (II) Loader magic: 0x7b7540
[ 30102.615] (II) Module ABI versions:
[ 30102.615] X.Org ANSI C Emulation: 0.4
[ 30102.615] X.Org Video Driver: 12.1
[ 30102.615] X.Org XInput driver : 16.0
[ 30102.615] X.Org Server Extension : 6.0
[ 30102.615] (--) PCI:*(0:5:4:0) 102b:0532:15d9:cd11 rev 10, Mem @ 0xfc000000/16777216, 0xfdffc000/16384, 0xfe000000/8388608, BIOS @ 0x????????/65536
[ 30102.615] (==) Using default built-in configuration (30 lines)
[ 30102.615] (==) --- Start of built-in configuration ---
[ 30102.615] Section "Device"
[ 30102.615] Identifier "Builtin Default mga Device 0"
[ 30102.615] Driver "mga"
[ 30102.615] EndSection
[ 30102.615] Section "Screen"
[ 30102.615] Identifier "Builtin Default mga Screen 0"
[ 30102.615] Device "Builtin Default mga Device 0"
[ 30102.615] EndSection
[ 30102.615] Section "Device"
[ 30102.615] Identifier "Builtin Default vesa Device 0"
[ 30102.615] Driver "vesa"
[ 30102.615] EndSection
[ 30102.615] Section "Screen"
[ 30102.615] Identifier "Builtin Default vesa Screen 0"
[ 30102.615] Device "Builtin Default vesa Device 0"
[ 30102.615] EndSection
[ 30102.615] Section "Device"
[ 30102.615] Identifier "Builtin Default fbdev Device 0"
[ 30102.615] Driver "fbdev"
[ 30102.615] EndSection
[ 30102.615] Section "Screen"
[ 30102.615] Identifier "Builtin Default fbdev Screen 0"
[ 30102.615] Device "Builtin Default fbdev Device 0"
[ 30102.615] EndSection
[ 30102.615] Section "ServerLayout"
[ 30102.615] Identifier "Builtin Default Layout"
[ 30102.615] Screen "Builtin Default mga Screen 0"
[ 30102.615] Screen "Builtin Default vesa Screen 0"
[ 30102.615] Screen "Builtin Default fbdev Screen 0"
[ 30102.615] EndSection
[ 30102.615] (==) --- End of built-in configuration ---
[ 30102.616] (==) ServerLayout "Builtin Default Layout"
[ 30102.616] (**) |-->Screen "Builtin Default mga Screen 0" (0)
[ 30102.616] (**) | |-->Monitor "<default monitor>"
[ 30102.616] (**) | |-->Device "Builtin Default mga Device 0"
[ 30102.616] (==) No monitor specified for screen "Builtin Default mga Screen 0".
Using a default monitor configuration.
[ 30102.616] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 30102.616] (**) | |-->Monitor "<default monitor>"
[ 30102.616] (**) | |-->Device "Builtin Default vesa Device 0"
[ 30102.616] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 30102.616] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 30102.616] (**) | |-->Monitor "<default monitor>"
[ 30102.616] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 30102.616] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 30102.616] (==) Automatically adding devices
[ 30102.616] (==) Automatically enabling devices
[ 30102.616] (==) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF/,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
[ 30102.616] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 30102.616] (II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
[ 30102.616] (II) LoadModule: "extmod"
[ 30102.617] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
[ 30102.617] (II) Module extmod: vendor="X.Org Foundation"
[ 30102.617] compiled for 1.12.4, module version = 1.0.0
[ 30102.617] Module class: X.Org Server Extension
[ 30102.617] ABI class: X.Org Server Extension, version 6.0
[ 30102.617] (II) Loading extension MIT-SCREEN-SAVER
[ 30102.617] (II) Loading extension XFree86-VidModeExtension
[ 30102.617] (II) Loading extension XFree86-DGA
[ 30102.617] (II) Loading extension DPMS
[ 30102.617] (II) Loading extension XVideo
[ 30102.617] (II) Loading extension XVideo-MotionCompensation
[ 30102.617] (II) Loading extension X-Resource
[ 30102.617] (II) LoadModule: "dbe"
[ 30102.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
[ 30102.618] (II) Module dbe: vendor="X.Org Foundation"
[ 30102.618] compiled for 1.12.4, module version = 1.0.0
[ 30102.618] Module class: X.Org Server Extension
[ 30102.618] ABI class: X.Org Server Extension, version 6.0
[ 30102.618] (II) Loading extension DOUBLE-BUFFER
[ 30102.618] (II) LoadModule: "glx"
[ 30102.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 30102.619] (II) Module glx: vendor="X.Org Foundation"
[ 30102.619] compiled for 1.12.4, module version = 1.0.0
[ 30102.619] ABI class: X.Org Server Extension, version 6.0
[ 30102.619] (==) AIGLX enabled
[ 30102.619] (II) Loading extension GLX
[ 30102.619] (II) LoadModule: "record"
[ 30102.619] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
[ 30102.619] (II) Module record: vendor="X.Org Foundation"
[ 30102.619] compiled for 1.12.4, module version = 1.13.0
[ 30102.619] Module class: X.Org Server Extension
[ 30102.619] ABI class: X.Org Server Extension, version 6.0
[ 30102.619] (II) Loading extension RECORD
[ 30102.619] (II) LoadModule: "dri"
[ 30102.620] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
[ 30102.620] (II) Module dri: vendor="X.Org Foundation"
[ 30102.620] compiled for 1.12.4, module version = 1.0.0
[ 30102.620] ABI class: X.Org Server Extension, version 6.0
[ 30102.620] (II) Loading extension XFree86-DRI
[ 30102.620] (II) LoadModule: "dri2"
[ 30102.621] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
[ 30102.621] (II) Module dri2: vendor="X.Org Foundation"
[ 30102.621] compiled for 1.12.4, module version = 1.2.0
[ 30102.621] ABI class: X.Org Server Extension, version 6.0
[ 30102.621] (II) Loading extension DRI2
[ 30102.621] (II) LoadModule: "mga"
[ 30102.621] (II) Loading /usr/local/lib/xorg/modules/drivers/mga_drv.so
[ 30102.621] (II) Module mga: vendor="X.Org Foundation"
[ 30102.621] compiled for 1.12.4, module version = 1.6.3
[ 30102.621] Module class: X.Org Video Driver
[ 30102.621] ABI class: X.Org Video Driver, version 12.1
[ 30102.621] (II) LoadModule: "vesa"
[ 30102.622] (WW) Warning, couldn't open module vesa
[ 30102.622] (II) UnloadModule: "vesa"
[ 30102.622] (II) Unloading vesa
[ 30102.622] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 30102.622] (II) LoadModule: "fbdev"
[ 30102.623] (WW) Warning, couldn't open module fbdev
[ 30102.623] (II) UnloadModule: "fbdev"
[ 30102.624] (II) Unloading fbdev
[ 30102.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 30102.624] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
[ 30102.624] (--) Using syscons driver with X support (version 2.0)
[ 30102.624] (--) using VT number 9
[ 30103.005] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 30103.005] (II) Loading sub module "vgahw"
[ 30103.005] (II) LoadModule: "vgahw"
[ 30103.005] (II) Loading /usr/local/lib/xorg/modules/libvgahw.so
[ 30103.005] (II) Module vgahw: vendor="X.Org Foundation"
[ 30103.005] compiled for 1.12.4, module version = 0.1.0
[ 30103.005] ABI class: X.Org Video Driver, version 12.1
[ 30103.005] (--) MGA(0): Chipset: "mgag200 eW Nuvoton"
[ 30103.005] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips.
If you don't intend to use video redirection enable with Option "HWCursor" "On"
[ 30103.005] xf86TokenToOptinfo: table is NULL
[ 30103.005] xf86TokenToOptinfo: table is NULL
[ 30103.006] (==) MGA(0): Using SW cursor
[ 30103.006] (--) MGA(0): Linear framebuffer at 0xFC000000
[ 30103.006] (--) MGA(0): MMIO registers at 0xFDFFC000
[ 30103.006] (--) MGA(0): Pseudo-DMA transfer window at 0xFE000000
[ 30103.007] (II) MGA(0): MAPPED Framebuffer FC000000 800000 to 804E00000.
[ 30103.008] (II) MGA(0): UNMAPPING framebuffer 0x804E00000, 0x800000.
[ 30103.011] (II) MGA(0): MAPPED Framebuffer FC000000 1000000 to 804E00000.
[ 30103.036] (II) MGA(0): UNMAPPING framebuffer 0x804E00000, 0x1000000.
[ 30103.036] (II) MGA(0): Creating default Display subsection in Screen section
"Builtin Default mga Screen 0" for depth/fbbpp 24/32
[ 30103.036] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[ 30103.036] (==) MGA(0): RGB weight 888
[ 30103.036] (**) MGA(0): Enabling KVM
[ 30103.036] (==) MGA(0): Using AGP 1x mode
[ 30103.036] (==) MGA(0): Using XAA acceleration
[ 30103.036] (II) Loading sub module "xaa"
[ 30103.036] (II) LoadModule: "xaa"
[ 30103.037] (II) Loading /usr/local/lib/xorg/modules/libxaa.so
[ 30103.037] (II) Module xaa: vendor="X.Org Foundation"
[ 30103.037] compiled for 1.12.4, module version = 1.2.1
[ 30103.037] ABI class: X.Org Video Driver, version 12.1
[ 30103.038] (--) MGA(0): Video BIOS info block at offset 0x07D40
[ 30103.038] (==) MGA(0): VideoRAM: 16320 kByte
[ 30103.038] (II) Loading sub module "ddc"
[ 30103.038] (II) LoadModule: "ddc"
[ 30103.038] (II) Module "ddc" already built-in
[ 30103.038] (II) Loading sub module "i2c"
[ 30103.038] (II) LoadModule: "i2c"
[ 30103.038] (II) Module "i2c" already built-in
[ 30103.039] (II) MGA(0): MAPPED Framebuffer FC000000 ff0000 to 805000000.
[ 30103.040] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 30103.291] (II) MGA(0): I2C bus "DDC P1" initialized.
[ 30103.291] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[ 30103.349] (II) MGA(0): I2C monitor info
[ 30103.349] (II) MGA(0): Manufacturer: ACI Model: 22fa Serial#: 16843009
[ 30103.349] (II) MGA(0): Year: 2010 Week: 52
[ 30103.349] (II) MGA(0): EDID Version: 1.3
[ 30103.349] (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 30103.349] (II) MGA(0): Signal levels configurable
[ 30103.349] (II) MGA(0): Sync: Separate Composite SyncOnGreen
[ 30103.349] (II) MGA(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 30103.349] (II) MGA(0): Gamma: 2.20
[ 30103.349] (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 30103.349] (II) MGA(0): Default color space is primary color space
[ 30103.349] (II) MGA(0): First detailed timing is preferred mode
[ 30103.349] (II) MGA(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.609
[ 30103.349] (II) MGA(0): blueX: 0.140 blueY: 0.069 whiteX: 0.313 whiteY: 0.329
[ 30103.349] (II) MGA(0): Supported established timings:
[ 30103.349] (II) MGA(0): 720x400@70Hz
[ 30103.349] (II) MGA(0): 640x480@60Hz
[ 30103.349] (II) MGA(0): 640x480@67Hz
[ 30103.349] (II) MGA(0): 640x480@72Hz
[ 30103.349] (II) MGA(0): 640x480@75Hz
[ 30103.349] (II) MGA(0): 800x600@56Hz
[ 30103.349] (II) MGA(0): 800x600@60Hz
[ 30103.349] (II) MGA(0): 800x600@72Hz
[ 30103.349] (II) MGA(0): 800x600@75Hz
[ 30103.349] (II) MGA(0): 832x624@75Hz
[ 30103.349] (II) MGA(0): 1024x768@60Hz
[ 30103.349] (II) MGA(0): 1024x768@70Hz
[ 30103.349] (II) MGA(0): 1024x768@75Hz
[ 30103.349] (II) MGA(0): 1280x1024@75Hz
[ 30103.349] (II) MGA(0): Manufacturer's mask: 0
[ 30103.349] (II) MGA(0): Supported standard timings:
[ 30103.350] (II) MGA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 30103.350] (II) MGA(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 30103.350] (II) MGA(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 30103.350] (II) MGA(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 30103.350] (II) MGA(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 30103.350] (II) MGA(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 30103.350] (II) MGA(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 30103.350] (II) MGA(0): Supported detailed timing:
[ 30103.350] (II) MGA(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 30103.350] (II) MGA(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 30103.350] (II) MGA(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 30103.350] (II) MGA(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 30103.350] (II) MGA(0): Monitor name: VE228
[ 30103.350] (II) MGA(0): Serial No: ACLMQS042939
[ 30103.350] (II) MGA(0): EDID (in hex):
[ 30103.350] (II) MGA(0): 00ffffffffffff000469fa2201010101
[ 30103.350] (II) MGA(0): 341401031e301b78eec4f5a3574a9c23
[ 30103.350] (II) MGA(0): 115054bfef00714f818081409500a940
[ 30103.350] (II) MGA(0): b300d1c00101023a801871382d40582c
[ 30103.350] (II) MGA(0): 4500132b2100001e000000fd00324c1e
[ 30103.350] (II) MGA(0): 5311000a202020202020000000fc0056
[ 30103.350] (II) MGA(0): 453232380a20202020202020000000ff
[ 30103.350] (II) MGA(0): 0041434c4d51533034323933390a00e0
[ 30103.350] (II) MGA(0): end of monitor info
[ 30103.725] (II) MGA(0): UNMAPPING framebuffer 0x805000000, 0xFF0000.
[ 30103.725] (II) MGA(0): EDID vendor "ACI", prod id 8954
[ 30103.725] (II) MGA(0): Using EDID range info for horizontal sync
[ 30103.725] (II) MGA(0): Using EDID range info for vertical refresh
[ 30103.725] (II) MGA(0): Printing DDC gathered Modelines:
[ 30103.725] (II) MGA(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 30103.725] (II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30103.725] (II) MGA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 30103.725] (II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30103.725] (II) MGA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 30103.725] (II) MGA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30103.725] (II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30103.725] (II) MGA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 30103.725] (II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30103.725] (II) MGA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 30103.725] (II) MGA(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 30103.725] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30103.725] (==) MGA(0): Min pixel clock is 18 MHz
[ 30103.726] (--) MGA(0): Max pixel clock is 203 MHz
[ 30103.726] (II) MGA(0): <default monitor>: Using hsync range of 30.00-83.00 kHz
[ 30103.726] (II) MGA(0): <default monitor>: Using vrefresh range of 50.00-76.00 Hz
[ 30103.726] (II) MGA(0): <default monitor>: Using maximum pixel clock of 175.00 MHz
[ 30103.726] (II) MGA(0): Estimated virtual size for aspect ratio 1.7778 is 1920x1080
[ 30103.726] (II) MGA(0): Clock range: 18.75 to 203.40 MHz
[ 30103.726] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 30103.726] (II) MGA(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "512x384i" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
[ 30103.726] (II) MGA(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "576x432" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "640x480" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth)
[ 30103.726] (II) MGA(0): Not using default mode "640x480" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
[ 30103.726] (II) MGA(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth)
[ 30103.726] (II) MGA(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[ 30103.726] (II) MGA(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[ 30103.726] (II) MGA(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[ 30103.726] (II) MGA(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30103.726] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[ 30103.726] (II) MGA(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "896x672" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "896x672" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "928x696" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "928x696" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "416x312" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "700x525" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "700x525" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30103.727] (II) MGA(0): Not using driver mode "1920x1080" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using driver mode "1280x1024" (mode requires too much memory bandwidth)
[ 30103.727] (II) MGA(0): Not using driver mode "1440x900" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using driver mode "1600x1200" (height too large for virtual size)
[ 30103.727] (II) MGA(0): Not using driver mode "1680x1050" (width too large for virtual size)
[ 30103.727] (II) MGA(0): Not using driver mode "1920x1080" (width too large for virtual size)
[ 30103.727] (WW) MGA(0): Shrinking virtual size estimate from 1920x1080 to 1280x1024
[ 30103.727] (--) MGA(0): Has SDRAM
[ 30103.727] (--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
[ 30103.727] (**) MGA(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[ 30103.727] (II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz ez)
[ 30103.727] (**) MGA(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[ 30103.727] (II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[ 30103.727] (**) MGA(0): *Driver mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[ 30103.727] (II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz ez)
[ 30103.727] (**) MGA(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[ 30103.728] (**) MGA(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz ez)
[ 30103.728] (**) MGA(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz zd)
[ 30103.728] (**) MGA(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 30103.728] (**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 30103.728] (**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 30103.728] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 30103.728] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 30103.728] (**) MGA(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 30103.728] (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz ez)
[ 30103.728] (**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 30103.728] (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 30103.728] (**) MGA(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz ez)
[ 30103.728] (**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 30103.728] (**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 30103.728] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 30103.728] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 30103.728] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 30103.728] (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 30103.728] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 30103.728] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz ez)
[ 30103.728] (**) MGA(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
[ 30103.728] (II) MGA(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz ez)
[ 30103.729] (**) MGA(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 30103.729] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 30103.729] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 30103.729] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 30103.729] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 30103.729] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 30103.729] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 30103.729] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 30103.729] (**) MGA(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[ 30103.729] (II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz ez)
[ 30103.729] (**) MGA(0): Display dimensions: (480, 270) mm
[ 30103.729] (**) MGA(0): DPI set to (67, 96)
[ 30103.729] (II) MGA(0): YDstOrg is set to 0
[ 30103.729] (II) Loading sub module "fb"
[ 30103.729] (II) LoadModule: "fb"
[ 30103.729] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 30103.730] (II) Module fb: vendor="X.Org Foundation"
[ 30103.730] compiled for 1.12.4, module version = 1.0.0
[ 30103.730] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30103.730] (--) Depth 24 pixmap format is 32 bpp
[ 30103.730] (II) MGA(0): MAPPED Framebuffer FC000000 ff0000 to 805200000.
[ 30103.732] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 30104.314] (--) MGA(0): 64 DWORD fifo
[ 30104.327] (==) MGA(0): Default visual is TrueColor
[ 30104.327] (EE) MGA(0): [drm] Direct rendering only supported with G200/G400/G450/G550.
[ 30104.327] (II) MGA(0): Using 2240 lines for offscreen memory.
[ 30104.327] (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
[ 30104.327] Screen to screen bit blits
[ 30104.327] Solid filled rectangles
[ 30104.327] Solid filled trapezoids
[ 30104.327] 8x8 mono pattern filled rectangles
[ 30104.327] 8x8 mono pattern filled trapezoids
[ 30104.327] Indirect CPU to Screen color expansion
[ 30104.327] Screen to Screen color expansion
[ 30104.327] Solid Lines
[ 30104.327] Dashed Lines
[ 30104.327] Scanline Image Writes
[ 30104.327] Setting up tile and stipple cache:
[ 30104.327] 32 128x128 slots
[ 30104.327] 14 256x256 slots
[ 30104.327] 5 512x512 slots
[ 30104.327] (==) MGA(0): Backing store disabled
[ 30104.327] (==) MGA(0): Silken mouse enabled
[ 30104.328] (==) MGA(0): DPMS enabled
[ 30104.328] (WW) MGA(0): Direct rendering disabled
[ 30104.328] (==) RandR enabled
[ 30104.328] (II) Initializing built-in extension Generic Event Extension
[ 30104.328] (II) Initializing built-in extension SHAPE
[ 30104.328] (II) Initializing built-in extension MIT-SHM
[ 30104.328] (II) Initializing built-in extension XInputExtension
[ 30104.328] (II) Initializing built-in extension XTEST
[ 30104.328] (II) Initializing built-in extension BIG-REQUESTS
[ 30104.328] (II) Initializing built-in extension SYNC
[ 30104.328] (II) Initializing built-in extension XKEYBOARD
[ 30104.328] (II) Initializing built-in extension XC-MISC
[ 30104.328] (II) Initializing built-in extension XINERAMA
[ 30104.328] (II) Initializing built-in extension XFIXES
[ 30104.328] (II) Initializing built-in extension RENDER
[ 30104.328] (II) Initializing built-in extension RANDR
[ 30104.328] (II) Initializing built-in extension COMPOSITE
[ 30104.328] (II) Initializing built-in extension DAMAGE
[ 30104.336] (II) AIGLX: Screen 0 is not DRI2 capable
[ 30104.336] (II) AIGLX: Screen 0 is not DRI capable
[ 30104.345] (II) AIGLX: Loaded and initialized swrast
[ 30104.345] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 30104.434] (II) config/hal: Adding input device HP USB Multimedia Keyboard
[ 30104.434] (II) LoadModule: "kbd"
[ 30104.434] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 30104.434] (II) Module kbd: vendor="X.Org Foundation"
[ 30104.435] compiled for 1.12.4, module version = 1.8.0
[ 30104.435] Module class: X.Org XInput Driver
[ 30104.435] ABI class: X.Org XInput driver, version 16.0
[ 30104.435] (II) Using input driver 'kbd' for 'HP USB Multimedia Keyboard'
[ 30104.435] (**) HP USB Multimedia Keyboard: always reports core events
[ 30104.435] (**) HP USB Multimedia Keyboard: always reports core events
[ 30104.435] (**) Option "Protocol" "standard"
[ 30104.435] (WW) Option "Device" requires an string value
[ 30104.435] (**) Option "XkbRules" "base"
[ 30104.435] (**) Option "XkbModel" "pc105"
[ 30104.435] (**) Option "XkbLayout" "us"
[ 30104.435] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_4f2_841_noserial_if1"
[ 30104.435] (II) XINPUT: Adding extended input device "HP USB Multimedia Keyboard" (type: KEYBOARD, id 6)
[ 30104.438] (II) config/hal: Adding input device HP USB Multimedia Keyboard
[ 30104.438] (II) Using input driver 'kbd' for 'HP USB Multimedia Keyboard'
[ 30104.438] (**) HP USB Multimedia Keyboard: always reports core events
[ 30104.438] (**) HP USB Multimedia Keyboard: always reports core events
[ 30104.438] (**) Option "Protocol" "standard"
[ 30104.438] (WW) Option "Device" requires an string value
[ 30104.438] (**) Option "XkbRules" "base"
[ 30104.438] (**) Option "XkbModel" "pc105"
[ 30104.438] (**) Option "XkbLayout" "us"
[ 30104.438] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_4f2_841_noserial_if0"
[ 30104.438] (II) XINPUT: Adding extended input device "HP USB Multimedia Keyboard" (type: KEYBOARD, id 7)
[ 30104.441] (II) config/hal: Adding input device Hermon USB hidmouse Device
[ 30104.441] (II) Using input driver 'kbd' for 'Hermon USB hidmouse Device'
[ 30104.441] (**) Hermon USB hidmouse Device: always reports core events
[ 30104.441] (**) Hermon USB hidmouse Device: always reports core events
[ 30104.441] (**) Option "Protocol" "standard"
[ 30104.441] (WW) Option "Device" requires an string value
[ 30104.441] (**) Option "XkbRules" "base"
[ 30104.441] (**) Option "XkbModel" "pc105"
[ 30104.441] (**) Option "XkbLayout" "us"
[ 30104.441] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_557_2221_noserial_if1"
[ 30104.441] (II) XINPUT: Adding extended input device "Hermon USB hidmouse Device" (type: KEYBOARD, id 8)
[ 30104.444] (II) config/hal: Adding input device Hermon USB hidmouse Device
[ 30104.444] (II) LoadModule: "mouse"
[ 30104.445] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 30104.445] (II) Module mouse: vendor="X.Org Foundation"
[ 30104.445] compiled for 1.12.4, module version = 1.9.0
[ 30104.445] Module class: X.Org XInput Driver
[ 30104.445] ABI class: X.Org XInput driver, version 16.0
[ 30104.445] (II) Using input driver 'mouse' for 'Hermon USB hidmouse Device'
[ 30104.445] (**) Hermon USB hidmouse Device: always reports core events
[ 30104.445] (**) Option "Device" "/dev/sysmouse"
[ 30104.445] (==) Hermon USB hidmouse Device: Protocol: "Auto"
[ 30104.445] (**) Hermon USB hidmouse Device: always reports core events
[ 30104.445] (==) Hermon USB hidmouse Device: Emulate3Buttons, Emulate3Timeout: 50
[ 30104.445] (**) Hermon USB hidmouse Device: ZAxisMapping: buttons 4 and 5
[ 30104.445] (**) Hermon USB hidmouse Device: Buttons: 5
[ 30104.445] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/usb_device_557_2221_noserial_if0"
[ 30104.445] (II) XINPUT: Adding extended input device "Hermon USB hidmouse Device" (type: MOUSE, id 9)
[ 30104.445] (**) Hermon USB hidmouse Device: (accel) keeping acceleration scheme 1
[ 30104.445] (**) Hermon USB hidmouse Device: (accel) acceleration profile 0
[ 30104.445] (**) Hermon USB hidmouse Device: (accel) acceleration factor: 2.000
[ 30104.445] (**) Hermon USB hidmouse Device: (accel) acceleration threshold: 4
[ 30104.445] (II) Hermon USB hidmouse Device: SetupAuto: hw.iftype is 4, hw.model is 0
[ 30104.445] (II) Hermon USB hidmouse Device: SetupAuto: protocol is SysMouse
[ 30104.448] (II) config/hal: Adding input device AT Keyboard
[ 30104.448] (II) Using input driver 'kbd' for 'AT Keyboard'
[ 30104.448] (**) AT Keyboard: always reports core events
[ 30104.448] (**) AT Keyboard: always reports core events
[ 30104.448] (**) Option "Protocol" "standard"
[ 30104.448] (WW) Option "Device" requires an string value
[ 30104.448] (**) Option "XkbRules" "base"
[ 30104.448] (**) Option "XkbModel" "pc105"
[ 30104.448] (**) Option "XkbLayout" "us"
[ 30104.448] (**) Option "config_info" "hal:/org/freedesktop/Hal/devices/atkbd_0"
[ 30104.448] (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD, id 10)
[ 30109.088] (II) UnloadModule: "kbd"
[ 30109.089] (II) UnloadModule: "kbd"
[ 30109.089] (II) UnloadModule: "kbd"
[ 30109.089] (II) UnloadModule: "mouse"
[ 30109.089] (II) UnloadModule: "kbd"
[ 30109.473] (II) MGA(0): UNMAPPING framebuffer 0x805200000, 0xFF0000.
[ 30109.477] Server terminated successfully (0). Closing log file.
At this point, it looks like X is at least starting correctly and exiting correctly. However, I note that it says that there are issues near the end with no DRI support, but I don't know if this is an issue or not. Anyone? Next, I re-initialize both the /var/log/Xorg.log.0 and the /var/log/kdm.log files with a simple
echo > "path to file"
. Now, I start up KDM with with /usr/local/etc/rc.d/kdm4 start
. The response is:
Code:
Updating KDM configuration.
Information: reading pre-existing kdmrc /usr/local/share/config/kdm/kdmrc (config version 2.4)
And then the prompt is returned. This is when I get the aforementioned behavior of the greeter popping up and then exiting and bumping me back to the command line on the console. On the console:
Code:
kdm: :0 [PID]: Abnormal termination of greeter for display :0, code 1, signal 0
The /var/log/kdm.log file shows:
Code:
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
klauncher(5313) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5308)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(5308)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request: BadDrawable (invalid Pixmap or Window parameter)
Major opcode of failed request: 62 (X_CopyArea)
Resource id in failed request: 0x0
Serial number of failed request: 567
Current serial number in output stream: 706
Server terminated successfully (0). Closing log file.
Now, the obvious is that it says no D-Bus session-bus found. However, it's set in /etc/rc.conf along with hald to be on:
Code:
*snip*
dbus_enable="YES"
hald_enable="YES"
*snip*
And in the process table, with the command
ps -auxww | egrep 'dbus|hald'
, I get:
Code:
messagebus 1585 0.0 0.0 17040 3144 - Is 11:24AM 0:00.33 /usr/local/bin/dbus-daemon --system
haldaemon 5514 0.0 0.0 60364 8188 - Is 7:35PM 0:00.18 /usr/local/sbin/hald
root 5515 0.0 0.0 46216 5776 - I 7:35PM 0:00.14 hald-runner
root 5538 0.0 0.0 31860 3936 - I 7:35PM 0:00.11 hald-addon-mouse-sysmouse: /dev/ums0 (hald-addon-mouse-sy)
root 5545 0.0 0.0 31860 3936 - I 7:35PM 0:00.11 hald-addon-mouse-sysmouse: /dev/ums1 (hald-addon-mouse-sy)
root 5570 0.0 0.0 23260 2668 - S 7:35PM 0:00.11 hald-addon-storage: /dev/cd0 (hald-addon-storage)
root 5578 0.0 0.0 18724 2112 1 S+ 7:36PM 0:00.00 egrep -i dbus|hal
As far as I can tell, the Xorg.0.log file is identical to the previous one. Does anyone have any insight or tutelage on troubleshooting this? I have no idea where the Matrox driver is with regards to the new X.Org stuff.
Thank you,
Paul