Please Help!!
From eBay, IBM Lenovo ServeRAID M1210. It said it was flashed to IT mode. However, this is in the dmesg:
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Fury SAS Controller> irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 2 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 2 Current MSIX <2>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC Init failed, status = 0x3
mrsas0: Adapter initialize Fail.
device_attach: mrsas0 attach returned 6
mrsas0: <AVAGO Fury SAS Controller> mem 0xe0100000-0xe010ffff irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW is in FAULT state!!
device_attach: mrsas0 attach returned 6
All the research I have done suggests that this is a firmware issue and it needs to be re-flashed.
Downloaded the firmware from here: Support Documents and Downloads
Tried to flash with: SAS3FLSH.EXE -0 -f SAS930~1.BIN
No Avago SAS adapters found! Limited Command Set Available!
My thought is there is a process that you need to go through to cross flash this card. Is it documented somewhere how to flash this card? Could someone provide a link or something or tell me how to make this work.
I don't know where to go from here.
Any help would be greatly appreciated!
From eBay, IBM Lenovo ServeRAID M1210. It said it was flashed to IT mode. However, this is in the dmesg:
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Fury SAS Controller> irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 2 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 2 Current MSIX <2>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC Init failed, status = 0x3
mrsas0: Adapter initialize Fail.
device_attach: mrsas0 attach returned 6
mrsas0: <AVAGO Fury SAS Controller> mem 0xe0100000-0xe010ffff irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW is in FAULT state!!
device_attach: mrsas0 attach returned 6
All the research I have done suggests that this is a firmware issue and it needs to be re-flashed.
Downloaded the firmware from here: Support Documents and Downloads
Tried to flash with: SAS3FLSH.EXE -0 -f SAS930~1.BIN
No Avago SAS adapters found! Limited Command Set Available!
My thought is there is a process that you need to go through to cross flash this card. Is it documented somewhere how to flash this card? Could someone provide a link or something or tell me how to make this work.
I don't know where to go from here.
Any help would be greatly appreciated!