I installed 8.0-CURRENT-200906-i386-dvd1.iso a few days ago and Im getting the following "Fatal trap 9" whenever I try to boot "whit ACPI disabled" or "Safe Mode":
The same thing happens with 7.2-RELEASE on this machine.
Machine specs on dmesg -v from 7.2-RELEASE.
If you need any extra info, please ask me and I´ll post it.
Best Regards
Gonzalo
Code:
Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; acpic id = 00
instruction pointer = 0x70:0xbfe4
stack pointer = 0x28:0xfa4
frame pointer = 0x28:0xfd4
code segment = base 0xc00f0000, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 0, gran 0
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
[thread pid 0 tid 100000 ]
Stopped at 0xbfe4: *** error reading from address bfe4 ***
db> bt
Tracing pid 0 tid 100000 td 0x0da9b50
uart_z8530_class(780001,0,b0202,ffe,0,...) at 0xbfe4
db>
The same thing happens with 7.2-RELEASE on this machine.
Machine specs on dmesg -v from 7.2-RELEASE.
If you need any extra info, please ask me and I´ll post it.
Best Regards
Gonzalo