Facing problem to connect dlink ethernet (1 giga) in FreeBSD 7.2 release

nazeerai · Jun 20, 2011

Facing problem to connect DLink ethernet (1 Gbit) to Intel motherboard DP43BF processor dualcore CPU E5700. OS: FreeBSD 7.2-RELEASE.

SirDice · Jun 20, 2011

And we're supposed to guess what the problem is?

DutchDaemon · Jun 20, 2011

And why would that be in the 'Ports Installation and Maintenance' forum?

nazeerai · Jun 21, 2011

Using DGE-528T (D-link ethernet 1 gigabit) in FreeBSD 7.2 not updated or shown in interface management.
I tried

Code:

miibus_load="YES"
if_re_load="YES"
if_rl_load="YES"

in /boot/defaults/loader.conf.

Unable to sort out this issue (FYI: I'm a learner in the FreeBSD environment)

SirDice · Jun 21, 2011

Please post the output of # pciconf -lv and # ifconfig -a

nazeerai · Jun 22, 2011

Please find the output
1. pciconf -lv

Code:

$ pciconf -lv
hostb0@pci0:0:0:0:	class=0x060000 card=0x00298086 chip=0x2e208086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:	class=0x060400 card=0x00298086 chip=0x2e218086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x00298086 chip=0x3a378086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *4'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x00298086 chip=0x3a388086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *5'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:26:2:	class=0x0c0300 card=0x00298086 chip=0x3a398086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *6'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x00298086 chip=0x3a3c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *2'
    class      = serial bus
    subclass   = USB
none0@pci0:0:27:0:	class=0x040300 card=0x00298086 chip=0x3a3e8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'HD Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib2@pci0:0:28:0:	class=0x060400 card=0x00298086 chip=0x3a408086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:1:	class=0x060400 card=0x00298086 chip=0x3a428086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:2:	class=0x060400 card=0x00298086 chip=0x3a448086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:3:	class=0x060400 card=0x00298086 chip=0x3a468086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 4'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:28:4:	class=0x060400 card=0x00298086 chip=0x3a488086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 5'
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:28:5:	class=0x060400 card=0x00298086 chip=0x3a4a8086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 6'
    class      = bridge
    subclass   = PCI-PCI
uhci3@pci0:0:29:0:	class=0x0c0300 card=0x00298086 chip=0x3a348086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *1'
    class      = serial bus
    subclass   = USB
uhci4@pci0:0:29:1:	class=0x0c0300 card=0x00298086 chip=0x3a358086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *2'
    class      = serial bus
    subclass   = USB
uhci5@pci0:0:29:2:	class=0x0c0300 card=0x00298086 chip=0x3a368086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *3'
    class      = serial bus
    subclass   = USB
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x00298086 chip=0x3a3a8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *1'
    class      = serial bus
    subclass   = USB
pcib8@pci0:0:30:0:	class=0x060401 card=0x00298086 chip=0x244e8086 rev=0x90 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x00298086 chip=0x3a168086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci1@pci0:0:31:2:	class=0x01018f card=0x00298086 chip=0x3a208086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'SATA2(4Port2) (ICH10 Family)'
    class      = mass storage
    subclass   = ATA
none1@pci0:0:31:3:	class=0x0c0500 card=0x00298086 chip=0x3a308086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'SMB controller  (50011458)'
    class      = serial bus
    subclass   = SMBus
atapci2@pci0:0:31:5:	class=0x010185 card=0x00298086 chip=0x3a268086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'SATA2(2Port2) (ICH10 Family)'
    class      = mass storage
    subclass   = ATA
vgapci0@pci0:1:0:0:	class=0x030000 card=0xa04619da chip=0x064110de rev=0xa1 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = '9400 GT (G96)'
    class      = display
    subclass   = VGA
atapci0@pci0:2:0:0:	class=0x01018f card=0x610111ab chip=0x610111ab rev=0xb2 hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = 'PATA 133 One Channel (88SE6101)'
    class      = mass storage
    subclass   = ATA
fwohci0@pci0:6:0:0:	class=0x0c0010 card=0x00298086 chip=0x34031106 rev=0x00 hdr=0x00
    vendor     = 'VIA Technologies Inc'
    class      = serial bus
    subclass   = FireWire
bge0@pci0:7:0:0:	class=0x020000 card=0x00298086 chip=0x169114e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    class      = network
    subclass   = ethernet

-------------------------------------------------------------------------------------------------------
2. ifconfig -a

Code:

$ ifconfig -a
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:22:4d:4a:65:72
	ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	lladdr 0.22.4d.ff.ff.4a.65.72.a.2.ff.fe.0.0.0.0
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
	ether 00:22:4d:4b:d8:d3
	inet 192.168.1.249 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
	inet6 ::1 prefixlen 128 
	inet 127.0.0.1 netmask 0xff000000

Thanks for the response.

DutchDaemon · Jun 22, 2011

@nazeerai, read your PM, and stop dumping unformatted stuff.

SirDice · Jun 22, 2011

The card is detected as bge(4), not re(4) or rl(4).

Facing problem to connect dlink ethernet (1 giga) in FreeBSD 7.2 release

nazeerai

SirDice

Administrator

DutchDaemon

Administrator

nazeerai

SirDice

Administrator

nazeerai

DutchDaemon

Administrator

SirDice

Administrator