ext2fs in dmesg

J

jaymax

Code: 
FreeBSD machinename 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012     root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

Added disks and SATA controller card resulted in fstab chaos

I am getting these error messages from dmesg on boot

Code: 
g_vfs_done():ada0p1[READ(offset=262144, length=8192)]error = 5
ext2fs: ada0p1: wrong magic number 0x5d (expected 0xef53)
ext2fs: ada0p3: wrong magic number 0 (expected 0xef53)
ext2fs: ada2p3: wrong magic number 0xc10d (expected 0xef53)
ext2fs: ada3s1b: wrong magic number 0xa1e4 (expected 0xef53)

Running fsck on these produces

Code: 
fsck: Could not determine filesystem type

Could someone suggest what corrective measures to take?

Thanks!
 
I had upgraded to 9.2, but now it shows 9.0 (?). Now I don't even have access to swap place on drives to do another upgrade, just the / slice mounted.
 
I did edit /etc/fstab, that's how I get / mounted on reboot, but it is the other disks that I can't. Presumably they are hidden in the those with the "wrong magic number" group, which I cannot even do a probing mount.
 
Please post your /etc/fstab. I have a feeling you're trying to mount FreeBSD's UFS filesystems as EXT2, which is obviously never going to work.
 
I will post it in another day or two, I am traveling right now away from the machine. Note: This /etc/fstab file would be the original /etc/fstab file with most of the entries rem'ed out, i.e. those preventing the mount on boot.
 
Back!
I managed to make some corrections that enabled some more volumes to be mounted but those mentioned earlier refuse to be accommodated. I'll supply the fstab, dmesg and other info as they may be needed.

The listed devices:
Code: 
# ls /dev/ad*
/dev/ad0@       /dev/ad0p1@     /dev/ad0p2@     /dev/ad0p3@     /dev/ad0p4@     /dev/ad0p5@     /dev/ad1@       /dev/ad1s1@
/dev/ad1s1b@    /dev/ad1s1e@    /dev/ad4@       /dev/ad4p1@     /dev/ad4p2@     /dev/ad4p3@     /dev/ad6@       /dev/ada0
/dev/ada0p1     /dev/ada0p2     /dev/ada0p3     /dev/ada1       /dev/ada2       /dev/ada2p1     /dev/ada2p2     /dev/ada2p3
/dev/ada2p4     /dev/ada2p5     /dev/ada3       /dev/ada3s1     /dev/ada3s1b    /dev/ada3s1e

Showing partitions for valid geoms:

Code: 
mach-#226:# gpart show /dev/ada0
=>       34  781422701  ada0  GPT  (372G)
         34        128     1  freebsd-boot  (64k)
        162  773848960     2  freebsd-ufs  (369G)
  773849122    7573612     3  freebsd-swap  (3.6G)
  781422734          1        - free -  (512B)

mach-#228:# gpart show /dev/ada2
=>      34  80043197  ada2  GPT  (38G)
        34       128     1  freebsd-boot  (64k)
       162  71303168     2  freebsd-ufs  (34G)
  71303330   2097152     4  freebsd-ufs  (1.0G)
  73400482   2097024     5  freebsd-ufs  (1G)
  75497506   4001792     3  freebsd-swap  (1.9G)
  79499298    543933        - free -  (265M)

mach-#229:# gpart show /dev/ada3
=>       63  156355521  ada3  MBR  (74G)
         63  156344517     1  freebsd  [active]  (74G)
  156344580      11004        - free -  (5.4M)
  
mach-#238:# gpart show /dev/ada3s1
=>        0  156344517  ada3s1  BSD  (74G)
          0    2097152       2  freebsd-swap  (1.0G)
    2097152  154247365       5  freebsd-ufs  (73G)

All the Others =>
Code: 
mach-#227:# gpart show /dev/ada1
gpart: No such geom: /dev/ada1.
mach-#230:# gpart show /dev/ada0p1
gpart: No such geom: /dev/ada0p1.
mach-#231:# gpart show /dev/ada0p2
gpart: No such geom: /dev/ada0p2.
mach-#232:# gpart show /dev/ada0p3
gpart: No such geom: /dev/ada0p3.
mach-#233:# gpart show /dev/ada2p1
gpart: No such geom: /dev/ada2p1.
mach-#234:# gpart show /dev/ada2p2
gpart: No such geom: /dev/ada2p2.
mach-#235:# gpart show /dev/ada2p3
gpart: No such geom: /dev/ada2p3.
mach-#236:# gpart show /dev/ada2p4
gpart: No such geom: /dev/ada2p4.
mach-#237:# gpart show /dev/ada2p5
gpart: No such geom: /dev/ada2p5.
mach-#239:# gpart show /dev/ada3s1e
gpart: No such geom: /dev/ada3s1e.

The /etc/fstab file is as follows:-
Code: 
# Device        Mountpoint      FStype  Options         Dump    Pass#
/dev/ada2p2     /               ufs     rw              1       1
/dev/ada1       /diskX1         ufs     rw              2       2
/dev/ada0p2     /diskY2         ufs     rw              2       2
/dev/ada0p3     none            swap    sw              0       0
/dev/ada2p4     /diskX4         ufs     rw              2       2
/dev/ada2p5     /diskX5         ufs     rw              2       2
# /dev/ada3       /diskZ2       ufs     rw              2       2
# /dev/ada3s1     /diskZ1       ufs     rw              2       2
# /dev/ada3s5     /diskZ1       ufs     rw              2       2
procfs          /proc          procfs   rw              0       0
/dev/cd0        /cdrom         cd9660  ro,noauto        0       0
/dev/cd1        /dvd           cd9660  rw,noauto        0       0

I hate to add the dmesg because of its size but this is the only way to possibly find errant messages that may have slipped me.
Code: 
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012
    root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: AMD Athlon(tm) XP 1800+ (1535.24-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Family = 6  Model = 8  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
real memory  = 1073676288 (1023 MB)
avail memory = 1031831552 (984 MB)
kbd1 at kbdmux0
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fef0000 (3) failed
acpi_timer0: couldn't allocate resource (port 0x4008)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0
pcib0: Length mismatch for 4 range: f00 vs eff
pcib0: Length mismatch for 4 range: aff0 vs afef
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8367 (KT266/KY266x/KT333) host to PCI bridge> on hostb0
agp0: aperture size is 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xe6001000-0xe60010ff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:bf:72:6d:96
atapci0: <SiI 680 UDMA133 controller> port 0x9400-0x9407,0x9800-0x9803,0x9c00-0x9c07,0xa000-0xa003,0xa400-0xa40f mem 0xe6000000-0xe60000ff irq 5 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcm0: <Creative CT5880-C> port 0xa800-0xa83f irq 5 at device 12.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
vgapci0: <VGA-compatible display> port 0xac00-0xac0f mem 0xe5000000-0xe5ffffff at device 14.0 on pci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb000-0xb00f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pcm1: <VIA VT8233> port 0xc000-0xc0ff irq 11 at device 17.5 on pci0
pcm1: <Avance Logic ALC101 AC97 Codec>
pcm1: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
acpi_tz0: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: failed to attach P_CNT
device_attach: acpi_throttle0 attach returned 6
Timecounters tick every 1.000 msec
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST3400633A 3.AAH> ATA-7 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 381554MB (781422768 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata3 bus 0 scbus1 target 0 lun 0
ada1: <Maxtor 6H500R0 HA3D1DD0> ATA-7 device
ada1: 133.000MB/s transfers (UDMA6, PIO 32768bytes)
ada1: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ata0 bus 0 scbus2 target 0 lun 0
ada2: <Maxtor 5T040H4 TAH71DP0> ATA-6 device
ada2: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada2: 39083MB (80043264 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad0
ada3 at ata0 bus 0 scbus2 target 1 lun 0
ada3: <MAXTOR 6L080J4 A93.0500> ATA-5 device
ada3: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada3: 76345MB (156355584 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad1
cd0 at ata1 bus 0 scbus3 target 0 lun 0
cd0: <CD-ROM Drive/G6D 1.30> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC" frequency 1535237342 Hz quality 800
cd1 at ata1 bus 0 scbus3 target 1 lun 0
cd1: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
GEOM: ada3s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/ada2p2 [rw]...
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
ext2fs: ada3s1b: wrong magic number 0xa1e4 (expected 0xef53)
g_vfs_done():ada0p1[READ(offset=262144, length=8192)]error = 5
ext2fs: ada0p1: wrong magic number 0x5d (expected 0xef53)
ext2fs: ada2p3: wrong magic number 0xc10d (expected 0xef53)

Note the ext2fs and the wrong magic number entries in the last four lines.
Note also the mismatch of label and geometry in the GEOM Line

and finally
Code: 
Filesystem                                  1024-blocks     Used     Avail Capacity  Mounted on
/dev/ada2p2                                    35080092 19375816  12897872    60%    /
devfs                                                 1        1         0   100%    /dev
/dev/ada1                                     480708396     3784 442247944     0%    /diskX1
/dev/ada0p2                                   374767060  2267616 342518080     1%    /diskY2
/dev/ada2p4                                     1031708      292    948880     0%    /diskX4
/dev/ada2p5                                     1031772        4    949228     0%    /diskX5
procfs                                                4        4         0   100%    /proc

I do have some missing data, probably on ada3s1.

Thanks!
 
You must log in or register to reply here.
Back
Top