Good Day.
I am really hopying someone can assist me here.
I have a E620 Huawei PCMCIA 3G card in a PCMCIA-TO-PCI Converter in a Freebsd server for a sms server i run.
Now it used to run without issues, however since the change over from 7.2 to 8.0REL it no longer works and there are no entries under /dev/cuaux and so forth.
It would be MUCH appreciated if i coulnd be rescued here!
Here is some info:
I am really hopying someone can assist me here.
I have a E620 Huawei PCMCIA 3G card in a PCMCIA-TO-PCI Converter in a Freebsd server for a sms server i run.
Now it used to run without issues, however since the change over from 7.2 to 8.0REL it no longer works and there are no entries under /dev/cuaux and so forth.
It would be MUCH appreciated if i coulnd be rescued here!
Here is some info:
Code:
real memory = 6442450944 (6144 MB)
avail memory = 6119706624 (5836 MB)
ACPI APIC Table: <INTEL DP35DP >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DP35DP> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x4400-0x441f mem 0xe8300000-0xe831ffff,0xe8320000-0xe8320fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1c:c0:19:0b:63
uhci0: <Intel 82801I (ICH9) USB controller> port 0x40e0-0x40ff irq 18 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x40c0-0x40df irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x40a0-0x40bf irq 17 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe8321c00-0xe8321fff irq 17 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SX6101 UDMA133 controller> port 0x3018-0x301f,0x3024-0x3027,0x3010-0x3017,0x3020-0x3023,0x3000-0x300f mem 0xe8200000-0xe82001ff irq 17 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci1: <JMicron JMB363 SATA300 controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0xe8100000-0xe8101fff irq 18 at device 0.0 on pci4
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 2> on atapci1
ata5: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci3: <Intel 82801I (ICH9) USB controller> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x4060-0x407f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x4040-0x405f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe8321800-0xe8321bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x1400-0x14ff mem 0xe8041000-0xe80410ff irq 21 at device 0.0 on pci7
re0: Chip rev. 0x04000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:13:f7:1a:a0:e7
re0: [FILTER]
vgapci0: <VGA-compatible display> port 0x1800-0x187f mem 0xe0000000-0xe3ffffff,0xe8000000-0xe803ffff at device 1.0 on pci7
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0xe8040000-0xe8040fff at device 2.0 on pci7
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH9 SATA300 controller> port 0x4428-0x442f,0x4434-0x4437,0x4420-0x4427,0x4430-0x4433,0x4020-0x403f mem 0xe8321000-0xe83217ff irq 21 at device 31.2 on pci0
atapci2: [ITHREAD]
atapci2: AHCI called from vendor specific driver
atapci2: AHCI v1.20 controller with 6 3Gbps ports, PM supported
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 2> on atapci2
ata8: [ITHREAD]
ata9: <ATA channel 3> on atapci2
ata9: [ITHREAD]
ata10: <ATA channel 4> on atapci2
ata10: [ITHREAD]
ata11: <ATA channel 5> on atapci2
ata11: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to deny, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 114472MB <Seagate ST3120026A 3.06> at ata2-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDROM <HL-DT-STDVD-ROM GDR8164B/0L06> at ata2-slave UDMA33
ad6: 152627MB <WDC WD1600BEVS-60RST0 04.01G04> at ata3-master SATA150
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ohci0: <NEC uPD 9210 USB controller> mem 0xde7ad000-0xde7adfff irq 18 at device 0.0 on cardbus0
ohci0: [ITHREAD]
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ad12: 1430799MB <Seagate ST31500341AS CC1H> at ata6-master SATA300
usbus8: reset timeout
ohci0: USB init failed
device_attach: ohci0 attach returned 6
ohci1: <NEC uPD 9210 USB controller> mem 0xde7ad000-0xde7adfff irq 18 at device 0.1 on cardbus0
ohci1: [ITHREAD]
ad14: 1430799MB <Seagate ST31500341AS CC1H> at ata7-master SATA300
ad16: 1430799MB <Seagate ST31500341AS CC1H> at ata8-master SATA300
ad18: 1430799MB <WDC WD15EADS-00R6B0 01.00A01> at ata9-master SATA300
usbus8: reset timeout
ohci1: USB init failed
device_attach: ohci1 attach returned 6
ad20: 1430799MB <WDC WD15EARS-00S8B1 80.00A80> at ata10-master SATA300
ad22: 1430799MB <Seagate ST31500341AS CC1H> at ata11-master SATA300
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
ugen2.2: <vendor 0x13ba> at usbus2
ukbd0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 2> on usbus2
kbd2 at ukbd0
ums0: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 2> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=1
ZFS filesystem version 13
ZFS storage pool version 13
em0: link state changed to UP
acd0: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0