DWA-130 Support

Not sure if this post belongs in System Hardware or Networking but I have a D-Link DWA-130 rev E1 (USB Wifi Adapter).

According to this webpage:

[i386,amd64] The run(4) driver supports the following wireless adapters:
D-Link DWA-130 rev B1

[i386,amd64] The otus(4) driver provices support for Atheros AR9170 USB IEEE 802.11b/g/n wireless network adapters, including:
D-Link DWA-130 rev D1

I'm not sure if either of those drivers will work. Is there a new driver available that supports rev E1?
All you can do is plug it in and see what happens. Note any screen output.

If that fails perhaps diagnose with a Linux LiveCD or Windows and see what chipset the device is using.

Really terrible the way these manufacturers treat people. How hard would it be to have different model numbers.
For the record. (DWA-131E1)
D-Link DWA-131 rev E1 does not work with urtwn (FreeBSD 11.2)

# usbconfig -d ugen1.3 dump_all_desc
ugen1.3: <Realtek Wireless N Nano USB Adapter> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x2001
idProduct = 0x3319
bcdDevice = 0x0200
iManufacturer = 0x0001 <Realtek>
iProduct = 0x0002 <Wireless N Nano USB Adapter>
iSerialNumber = 0x0003 <00e04c000001>
bNumConfigurations = 0x0001

Jul 24 17:21:49 pland kernel: ugen1.3: <Realtek Wireless N Nano USB Adapter> at usbus1
Jul 24 17:21:49 pland root: Unknown USB device: vendor 0x2001 product 0x3319 bus uhub3