Solved Default route in FIB 1

S

Shakroglof

Hi,
Since I upgraded to Freebsd 14, the IPV4 default route isn't setup after boot

Defaultrouter (and static_routes for a test) is setup in rc.conf :
gateway_enable="YES" ifconfig_re0="SYNCDHCP" ifconfig_re0_ipv6="inet6 xxxx:xxxx:xxxx:xxxx::3" ipv6_defaultrouter="xxxx:xxxx:xxxx:xxxx::1" defaultrouter_fib1="192.168.1.1" static_routes="default_fib1" route_default_fib1="default 192.168.1.1 -fib 1"

In sysctl.conf :
net.add_addr_allfibs=1


But there is no default route after startup:
imrryr# netstat -4rnF1 Routing tables (fib: 1) Internet: Destination Gateway Flags Netif Expire 127.0.0.1 link#2 UH lo0 192.168.1.0/24 link#1 U re0 192.168.5.1 link#2 UH lo0 192.168.5.4 link#2 UH lo0 192.168.5.5 link#2 UH lo0 192.168.6.1 link#2 UH lo0 192.168.20.0/24 link#7 U wg0

Only when I run service routing start
imrryr# service routing start add host 127.0.0.1: gateway lo0 fib 0: route already in table add host 127.0.0.1: gateway lo0 fib 1: route already in table add net default: gateway 192.168.1.1 fib 1 add net default: gateway 192.168.1.1 fib 1: route already in table Additional inet routing options: gateway=YES. add host ::1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 1: route already in table add net fe80::: gateway ::1 fib 0: route already in table add net fe80::: gateway ::1 fib 1: route already in table add net ff02::: gateway ::1 fib 0: route already in table add net ff02::: gateway ::1 fib 1: route already in table add net ::ffff:0.0.0.0: gateway ::1 fib 0: route already in table add net ::ffff:0.0.0.0: gateway ::1 fib 1: route already in table add net ::0.0.0.0: gateway ::1 fib 0: route already in table add net ::0.0.0.0: gateway ::1 fib 1: route already in table add net default: gateway xxxx:xxxx:xxxx:xxxx::1 fib 0: route already in table

I get the default route :
imrryr# netstat -4rnF1 Routing tables (fib: 1) Internet: Destination Gateway Flags Netif Expire default 192.168.1.1 UGS re0 127.0.0.1 link#2 UH lo0 192.168.1.0/24 link#1 U re0 192.168.5.1 link#2 UH lo0 192.168.5.4 link#2 UH lo0 192.168.5.5 link#2 UH lo0 192.168.6.1 link#2 UH lo0 192.168.20.0/24 link#7 U wg0

How can I get the default route automatically ?

Regards,
Shak
 
You must log in or register to reply here.
Back
Top