Installed FreeBSD 10.1.
Immediately upgraded to 10-STABLE.
/etc/rc.conf:
/var/log/Xorg.0.log:
I'm on a virtual private server at vultr.com. It appears to be a virtio(4) device, which supposedly is supported by the generic FreeBSD 10 kernel.
Upon advice found somewhere, after it wasn't working, tried:
/boot/loader.conf:
Same error.
Now, /var/log/Xorg.0.log:
EDIT:
/var/log/Xorg.0.log:
EDIT 2:
Decided to try vesa instead of cirrus,
(exists, 32792 bytes)
It's now using the vesa drivers. But, still:
Immediately upgraded to 10-STABLE.
pkg install xorg pkg install gnome3/etc/rc.conf:
Code:
moused_enable="YES"
hald_enable="YES"
dbus_enable="YES"
gdm_enable="YES"
gnome_enable="YES" reboot/var/log/Xorg.0.log:
Code:
X.Org X Server 1.14.7
Release Date: 2014-06-05
...
Current version of pixman: 0.32.6
...
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 14.1
X.Org XInput driver : 19.1
X.Org Server Extension: 7.0
(--)PCI:*(0:0:2:0) 1013:00b8:1af4:1100 rev 0, Mem @ 0xfc000000/33554432, 0xfebf0000/4096, BIOS @ 0x????????/65536
(==) Using default built-in configuration (30 lines)
... Driver "cirrus"
... Device "Builtin Default cirrus Device 0"
... Driver "vesa"
... Device "Builtin Default vesa Device 0"
... Driver "fbdev"
... Device "Builtin Default fbdev Device 0"
... No monitor specified for screen "Builtin Default cirrus Screen 0".
... No monitor specified for screen "Builtin Default vesa Screen 0".
... No monitor specified for screen "Builtin Default fbdev Screen 0".
Missing output drivers. Configuration failed.
...
(II) LoadModule: "cirrus"
(WW) Warning, couldn't open module cirrus
...
(EE) Failed to load module "cirrus" (module does not exist, 0)
...
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
...
(EE) Failed to load module "vesa" (module does not exist, 0)
...
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
...
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
(EE) no screens found(EE) pciconf -l | grep vga
Code:
vgapci0@pci0:0:2:0: class=0x030000 card=0x11001af4 chip=0x00b81013 rev=0x00 hdr=0x00 dmesg | grep vga
Code:
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfdffffff,0xfebf0000-0xfebf0fff at device 2.0 on pci0
vgapci0: Boot video device
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0I'm on a virtual private server at vultr.com. It appears to be a virtio(4) device, which supposedly is supported by the generic FreeBSD 10 kernel.
Upon advice found somewhere, after it wasn't working, tried:
/boot/loader.conf:
Code:
virtio_load="YES"
virtio_pci_load="YES"
virtio_blk_load="YES"
if_vtnet_load="YES"Same error.
Tried Xorg -configureNow, /var/log/Xorg.0.log:
Code:
X.Org X Server 1.14.7
Release Date: 2014-06-05
...
Current version of pixman: 0.32.6
...
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 14.1
X.Org XInput driver : 19.1
X.Org Server Extension: 7.0
(--)PCI:*(0:0:2:0) 1013:00b8:1af4:1100 rev 0, Mem @ 0xfc000000/33554432, 0xfebf0000/4096, BIOS @ 0x????????/65536
Missing output drivers. Configuration failed.EDIT:
pkg install xf86-video-cirrus/var/log/Xorg.0.log:
Code:
...
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
(EE) Illegal instruction at address 0x4a40f0
(EE)
(EE) Caught signal 4 (Illegal instruction). Server abortingEDIT 2:
Decided to try vesa instead of cirrus,
pkg remove xf86-video-vesa
Code:
...
xf86-video-vesa-2.3.3_5
xorg-drivers-7.7_3
xorg-7.7_2
...
pkg: cannot stat /usr/local/lib/xorg/modules/drivers/vesa_drv.so: No such file or directory
...
pkg: cannot stat /usr/local/man/man4/vesa.4x.gz: No such file or directory pkg install xf86-video-vesa xorg-driverx xorg ll /usr/local/lib/xorg/modules/drivers/vesa(exists, 32792 bytes)
reboot
Code:
(--) Chipset CLGD5446 found
automatically using the cirrus drivers, not the vesa drivers pkg remove xf86-video-cirrus rebootIt's now using the vesa drivers. But, still:
Code:
(EE) Illegal instruction at address 0x4a40f0
(EE)
(EE) Caught signal 4 (Illegal instruction). Server aborting.
