Hi,
I am trying to boot FreeBSD on rockpro64 SBC. Unfortunately, it doesn't boot but at least I am getting some messages through serial connection:
I used Etcher and `dd` (on macos) to burn "FreeBSD-13.0-CURRENT-arm64-aarch64-ROCKPRO64-20201105-ef87bd449eb.img.xz" image with the same results. Booting from Armbian and NetBSD images works so I suspect that something is wrong with FreeBSD image or the way I am burning it.
Could you give me some clues on how to debug this issue next? I am out of ideas...
P.S For `dd` I followed steps from here https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/bsdinstall-pre.html
P.S.S I used NetBSD image linked from here https://wiki.pine64.org/wiki/ROCKPro64_Software_Release#BSD_Images
I am trying to boot FreeBSD on rockpro64 SBC. Unfortunately, it doesn't boot but at least I am getting some messages through serial connection:
Code:
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.07 (Nov 05 2020 - 04:58:29 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
I used Etcher and `dd` (on macos) to burn "FreeBSD-13.0-CURRENT-arm64-aarch64-ROCKPRO64-20201105-ef87bd449eb.img.xz" image with the same results. Booting from Armbian and NetBSD images works so I suspect that something is wrong with FreeBSD image or the way I am burning it.
Could you give me some clues on how to debug this issue next? I am out of ideas...
P.S For `dd` I followed steps from here https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/bsdinstall-pre.html
P.S.S I used NetBSD image linked from here https://wiki.pine64.org/wiki/ROCKPro64_Software_Release#BSD_Images