I have build an image for BBB using crochet build tool according to this manual:
http://www.onemansanthology.com/blog/freebsd-on-beaglebone-black/
I don't know why but after startup, it reboots! Here's what I get after reboot:
http://www.onemansanthology.com/blog/freebsd-on-beaglebone-black/
I don't know why but after startup, it reboots! Here's what I get after reboot:
Code:
U-Boot SPL 2014.10 (Sep 28 2016 - 07:26:39)
MMC: block number 0x100 exceeds max(0x0)
MMC: block number 0x200 exceeds max(0x0)
*** Error - No Valid Environment Area found
Using default environment
reading u-boot.img
reading u-boot.img
U-Boot 2014.10 (Sep 28 2016 - 07:26:39)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
reading u-boot.env
** Unable to read "u-boot.env" from mmc0:1 **
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
reading uEnv.txt
Hit any key to stop autoboot: 0
Booting from: mmc 0 ubldr
reading ubldr
250639 bytes read in 21 ms (11.4 MiB/s)
## Starting application at 0x88000054 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @9e731510