Automatic FreeBSD does not mount USB removable.

T

teo

Hello community:

This introduced the USB stick into the computer and will not let me open. He says not yet mounted removable volume, is installed FreeBSD-10 (¡386), can someone help?
Try this way and it did not work. :)

Code: 
root@freebsr:~ # mount -t msdos /dev/da0s1 /mnt/
mount: Using "-t msdosfs", since "-t msdos" is deprecated.
mount_msdosfs: /dev/da0s1: No such file or directory
root@freebsr:~ #
 
No such file or directory probably means that what is on the memory stick is not what you think it is. What does ls /dev/da* show?
 
I gave this result, now what?.

Code: 
root@freebsr:~ # ls /dev/da*
/dev/da0	              /dev/da0a
root@freebsr:~ #
On that USB stick, this music, this software package, the documents and notes. This FreeBSD installed on this computer with xfce graphical desktop and do not understand why it does not automatically open when inserting the USB memory and CD/DVD, the icons are present on the desktop but will not open because it says it is not mounted.
 
teo said:
Code: 
root@freebsr:~ # ls /dev/da*
/dev/da0	 /dev/da0a
Click to expand...
Well, then it's obvious why mount -t msdosfs /dev/da0s1 /mnt/ won't work!

Some pendrives are "formatted" differently. They either have a single partition covering the entire device (what was known as "dangerously dedicated", e.g. da0a) or the filesystem is directly written on the raw device (e.g. da0).
So first, try mount -t msdosfs /dev/da0a /mnt/ and if that doesn't work, try mount -t msdosfs /dev/da0 /mnt/.
 
da0a is a FreeBSD "dangerously dedicated" format, probably a FreeBSD install image. # file -s /dev/da0a will identify it for sure.

To get xfce to auto-mount memory sticks, a third-party automounter must be used.
 
The problem is not mounting any USB memory, either the CD/DVD drive is mounted. Again icons USB and Disc are present but can not be opened.
Nor does the computer audio while continuing the FreeBSD handbook.

Result of mount -t msdosfs /dev/da0a /mnt/

Code: 
# mount -t msdosfs /dev/da0a /mnt/
mount_msdosfs: /dev/da0a: No such file or directory
#

Result of mount -t msdosfs /dev/da0 /mnt/

Code: 
# mount -t msdosfs /dev/da0 /mnt/
mount_msdosfs: /dev/da0: Invalid argument
#

Command test dmesg | tail:

Code: 
# dmesg | tail
ugen4.2: <TOSHIBA> at usbus4
umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <TOSHIBA TransMemory PMAP> Removable Direct Access SCSI-0 device 
da0: Serial Number 001CC0C60DDAECC0C32601BB
da0: 40.000MB/s transfers
da0: 59557MB (121974144 512 byte sectors: 255H 63S/T 7592C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
#
 
It's truly Beastie apparently the mount point is not in the USB, which can not open the system. Fixer Upper and tax as a USB drive to a mount point? . Same with the CD/DVD that are not well taxed, the system can not mount a CD/DVD as tax should be opened to the FreeBSD system ?.
Enter other USB memory and automatically report came out a window if I want to open. The same happened with a CD encumbered automatically jump the window asked to do :) .
 
@teo use a different translator program please. This make no sense at all.
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top