After install nvidia Driver refresh rate in all resolution is lower than 55 HZ

If you have a modern monitor it should be able to show the current resolution and refresh rate. Have a look at that to see what the refresh rate is.
 
SirDice said:
If you have a modern monitor it should be able to show the current resolution and refresh rate. Have a look at that to see what the refresh rate is.
Click to expand...

but I do not have this problem with nv driver , but when I install nvidia driver this is happen for me.
 
I had the same. You should google your monitors refresh rates and set it in /etc/X11/xorg.conf
These are for my Sony multiscan 200ES:

Section "Monitor"
Identifier "moni"
HorizSync 31.5-68.7
VertRefresh 60-85
EndSection
 
MG said:
I had the same. You should google your monitors refresh rates and set it in /etc/X11/xorg.conf
These are for my Sony multiscan 200ES:

Section "Monitor"
Identifier "moni"
HorizSync 31.5-68.7
VertRefresh 60-85
EndSection
Click to expand...

I do that before
 
Try starting X with $ startx="startx -- -logverbose 6"
Once started type $ egrep -E \([0-9]\{3,4\}\)x\([0-9]\{3,4\}\) /var/log/Xorg.0.log

What is the output?

What can you see on the lower right corner of xvidtune?
 
You still haven't said how you are retrieving the refresh rate. If you are using xrandr, or xvidtune, you should not expect the correct refresh rate to be displayed. Use nvidia-settings to see what it is.

Adam
 
when I type

Code: 
 xrandr

I see this

Code: 
Screen 0: minimum 320 x 240, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
   1280x1024      50.0*    51.0  
   1024x768       52.0     55.0     56.0  
   1280x960       53.0  
   1152x864       54.0  
   832x624        57.0  
   800x600        58.0     59.0     60.0     61.0     62.0     63.0  
   640x512        64.0     65.0  
   640x480        66.0     67.0     68.0     69.0  
   576x432        70.0  
   512x384        71.0     72.0     73.0  
   416x312        74.0  
   400x300        75.0     76.0     77.0     78.0  
   320x240        79.0     80.0     81.0

when I run
Code: 
nvidia-setting
Is ee refresh rate is 75
but when I sit in front of computer after 15 minute I get headache . and I think refresh rate is not good

but system setting in kde 4.2 show me refresh rate is 51 HZ
 
The refresh rate shown in nvidia-settings is correct. As the link that I pointed you to explains, xrandr and normal X utilities will *not* report the correct refresh rate.

If 75 isn't good enough, try adjusting it. If you still have problems, get your eyes checked.

Adam
 
adamk said:
The refresh rate shown in nvidia-settings is correct. As the link that I pointed you to explains, xrandr and normal X utilities will *not* report the correct refresh rate.

If 75 isn't good enough, try adjusting it. If you still have problems, get your eyes checked.

Adam
Click to expand...
but I do not have this problem with this driver and everything is OK

Code: 
/usr/ports/xf86-video-nv
 
Then you need to take it up with nvidia. I've told you the exactly what they tell everyone who has asked this question on the nvnews.net forums. If you have dynamic twinview enabled (and it is enabled by default) then the normal X utilities will not report the correct refresh rate but nvidia-settings will.
 
I install new driver of nvidia last night after port update
but after install new driver I see another problem


1- font is very terrible and if I see them I see they make by .... or point

2- after install new driver I do not have special effect and everything is like nv driver
 
You haven't given us much to work with... What does your /var/log/Xorg.0.log file say? Bear in mind that updating your drivers is not going to get your refresh rate to report properly.

Adam
 
You did reboot after updating the driver, right? It's a kernel module that needs to be reloaded.
 
adamk said:
You haven't given us much to work with... What does your /var/log/Xorg.0.log file say? Bear in mind that updating your drivers is not going to get your refresh rate to report properly.

Adam
Click to expand...

this is output of cat /var/log/Xorg.0.log

in attach
 

Attachments

  • xorg.txt
    11.5 KB · Views: 282
Code: 
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX

This is Xorg's GLX driver, not NVIDIA's.

Code: 
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
(EE) NVIDIA(0):     you continue to encounter problems, Please try
(EE) NVIDIA(0):     reinstalling the NVIDIA driver.

Whenever xorg-server is updated, you'll have to reinstall the NVIDIA driver to replace Xorg's GLX driver (/usr/local/lib/xorg/modules/extensions/libglx.so).
 
DutchDaemon said:
Code: 
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX

This is Xorg's GLX driver, not NVIDIA's.

Code: 
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
(EE) NVIDIA(0):     you continue to encounter problems, Please try
(EE) NVIDIA(0):     reinstalling the NVIDIA driver.

Whenever xorg-server is updated, you'll have to reinstall the NVIDIA driver to replace Xorg's GLX driver (/usr/local/lib/xorg/modules/extensions/libglx.so).
Click to expand...

So do I must reinstall nvidia driver and do not reinstall xorg-server ????
 
You must log in or register to reply here.
Back
Top