Search results

  1. none

    ZFS ZFS inconsistent, can't delete files

    Part1: I was on a hurry, forgot to put all information: root@NanopiR5S-nvme:/usr/obj/mnt/local/opnsense/R5SJUNTO/tools/config/23.7/aarch64/mnt/local/opnsense/R5SJUNTO/ports # ls -ld x11* ls: x11-fonts/urwfonts: No such file or directory when I issue an "ls", the folder x11-fonts/urwfonts...
  2. none

    ZFS ZFS inconsistent, can't delete files

    Hi, I have a nanopi R5S running 14-CURRENT and now I am trying to build opnsense for aarch64 on it. Now my issue, I begin to build and it crashes. After that my issue is: root@NanopiR5S-nvme:/usr/obj/mnt/local/opnsense/R5SJUNTO/tools/config/23.7/aarch64/mnt/local/opnsense/R5SJUNTO/ports # rm...
  3. none

    How to run FreeBSD on new boards built on Rockchip 35XX..

    I got some success on really early images that hdmi would work here. Serial failed to work and I could see early messages from it telling resolution of the hdmi monitor and failing. So I removed hdmi for good and I have serial working. Sometimes its 115200, other 1500000, sometimes are mixed and...
  4. none

    How to run FreeBSD on new boards built on Rockchip 35XX..

    Hi, I told SleepWalker something close to this nvme error. It may be something about the image date. Later let me install freebsd on nvme using zfs (as SleepWalker told me, no ufs so far). This week I had issues using WD Blue 1TB nvme, using bsdinstall from the image created. I changed for...
  5. none

    How to run FreeBSD on new boards built on Rockchip 35XX..

    As fas as I know, FTD method. I use the uefi images available from SleepWalker. About the numbers, I had hopes it would reach to 1Gbps numbers, or close, as the benchmarks pointed to (Linux, need to say). My network link for it is 500Mbps, so yet a bit far from what it will handle, hence my...
  6. none

    How to run FreeBSD on new boards built on Rockchip 35XX..

    Hi, I have a NanoPI R5S 4GB here and been talking to SleepWalker for about a month now. I am not a developer, so my progress was way too slow here. Yesterday I got to have a custom build for it, using both resources from him and Soren. FreeBSD NanopiR5S-nvme 14.0-CURRENT FreeBSD 14.0-CURRENT...
  7. none

    NanoPI R5S and FreeBSD 14

    Hi folks, I am looking for information on how to build FreeBSD 14 for this device. I got an image from the guy working on opnsense for it, FreeBSD 13.2 works. But only one NIC works. If anyone can give a hint. thanks, none
  8. none

    run0 hostap - can't find the network ssid

    The issue is not connecting, way before it it fails, I cannot even see the ssid to try to connect to it. Thanks man, but I can get another USB dongle to broadcast a ssid. This is not possible with this. See bellow Hi again :) I found another thread you posted and tried it, thanks :) I did...
  9. none

    run0 hostap - can't find the network ssid

    Hi astyle, thanks for the info. I tried in the order you told, and the result was the same. If I use the rum0 dongle, in any order, it works. My question is to know how can I tell if its a hardware issue or driver. thanks again, none
  10. none

    run0 hostap - can't find the network ssid

    Hi, I have an usb wifi dongle: run0: <1.0> on usbus1 run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address xxxx run0: [HT] Enabling 802.11n I create an hostap config using ifconfig: wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether xxxx...
  11. none

    Unifi 6 package

    Hi, I am a very light user, but it is working fine so far. Version 6.0.45. Glad I chose the v6. none
  12. none

    Unifi 6 package

    Hi guys, thanks for the information regarding this package. The installation I did in two steps for now, I used packages for most of it and ports to the unifi6 software. It is working fine. Thanks again :) none
  13. none

    Unifi 6 package

    Yet when I force the update: root@hyperbsd:/usr/ports/net-mgmt # pkg update -f Updating FreeBSD repository catalogue... Fetching meta.conf: 100% 163 B 0.2kB/s 00:01 Fetching packagesite.txz: 100% 6 MiB 2.2MB/s 00:03 Processing entries: 100% FreeBSD repository update...
  14. none

    Unifi 6 package

    Here I am not that lucky :( root@hyperbsd:/usr/ports/net-mgmt # pkg fetch unifi6 Updating FreeBSD repository catalogue... FreeBSD repository is up to date. All repositories are up to date. pkg: No packages matching 'unifi6' have been found in the repositories...
  15. none

    Unifi 6 package

    Hello, I found the port of Unifi version 6 on the freshports.org site, but when I try a search for the package I just see unifi5 answers. Tried on more than one machine, all of then are amd64. I now have a machine updating ports to look for it. Is it not there and the site is wrong? Thanks...
  16. none

    FreeBSD 11.2 -> 12.1 amd64 using freebsd-update - console issue (I guess wrong resolution)

    Hi all, now my notebook is weird. If I turn it on and boot to FreeBSD, I get the console and then it changes to vt and I get the resolution as expected. By the way, its not uefi boot. If I get to FreeBSD from a ubuntu reboot, it has the same behavior as before, the boot is blind to me (just a...
  17. none

    FreeBSD 11.2 -> 12.1 amd64 using freebsd-update - console issue (I guess wrong resolution)

    Hi all, those tips got me to have again the console. Thanks! But from Grub (this box has Ubuntu and Windows also) till I get to the part rc loads the driver, I can see nothing. No bootloader screen and if I need to type anything to the booting kernel, I can't. chrbr, how can I know I am using...
  18. none

    FreeBSD 11.2 -> 12.1 amd64 using freebsd-update - console issue (I guess wrong resolution)

    Hi, I just upgraded a amd64 11.2 box to 12.1 using freebsd-update and, apart the console screen, all is fine. The console works, as I can see a thin line brighter and changing when I type on keyboard and I can log in and type the dhclient command for it to get online (will write it to rc.conf...
  19. none

    FreeBSD upgrade from 11.3 to 12.1

    Hi, I just upgraded an old 11.2 amd64 install to 12.1 and had the same thing. looking forward to hearing this as well.
  20. none

    ZFS OpenZFS not mounting data sets at boot?

    Same here. according to https://zfsonfreebsd.github.io/ZoF/ I can see they tell to rebuild world without the zfs tools from base. That may be the point. So far I can't boot and have all zfs pools on.
Back
Top