Hi Guys.
I have a super micro server with this controller :
http://www.addonics.com/products/adsa3gpx8-4e.php
Connected to and Addonics storage rack via 4 eSata ports and port multipliers to 10 disks using ZFS.
It has been working fine but lately I have been experience some issues...
I get that but where is should get worry about the performance ?
when I have no ram free and I'm swapping like crazy or when the wired memory is basically 0 and the active memory is = total memory of system ?
I remember that in Centos all the memory is cached and that is how appears in...
Maybe the problem that I do not understand how to represent correctly the top information.
If I see a system 99% idle with 14 GB of ram but 600M free I will think that is not really idle but I guess that the rest of the memory is wired "cached" so that is why the load average is 0 ?
Yes it is right but this metric are from when the server has been ok normally I have 6GB of swap in use.
The thing is of all my other FBSD 8.2 servers ( with way more taffic that this one) I never get to have 600 mb free of 14 GBs that is why I'm kinda thinking that is not normal.
Thanks.
Hi.
I have a Supermicro server with FBSD 8.2 connected to a storagerack with 10 disk and a addonics card.
It has been stable for almost a year but now is not been a good boy.
I check traffic and process and I don't see anything weird, logs are normal except for some Ldap server not...
Hi Guys.
I have a Addonics controler connected to 10 HD using eSata on a Freebsd 8.2 AMD64 supermicro server.
I haven't had any problems until now where where all of the sudden my server is eating all the memory and is kinda slow, I even add more memory but still same problem.
So I...
So I followed your suggestion and this is what dmesg showed:
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 34970MB (71619584 sectors)
aacd1: <Volume> on aac0
aacd1: 34970MB (71619584 sectors)
aacd2: <Volume> on aac0
aacd2: 34970MB (71619584 sectors)
aacd3: <Volume> on aac0
aacd3: 139981MB (286681728...
Phoenix then again thank you for answers.
I understand what you said and this is why my storage server can see the drives directly connected to the RAID controller because the controller does not have any RAID config on it.
When I installed this new server I didn't have any RAID config on it...
I will check if I can do RAID0 with one drive, that is a good tip and thank you.
But it sounds like a hack to me, isn't it?
I have other servers with some LSI and sis3124 and I don't have this problem, in fact my storage system uses an Addonics sis3124 adapter with 10 disks connected to a port...
Intel Raid Matrix RAIDs are the worst, I had exactly the same problem as you and after the reinstall I start using gmirror.
I remember that I manage to boot up using the livecd.
Hi guys.
First of all this is my setup:
FreeBSD 9.0
Supermicro Server
Motherboard: Supermicro X7DB8
6 x Cheetah® 15K.5 Ultra320 SCSI 146-GB Hard Drive
Adaptec 2020ZCR [7373 bios] (Supermicro branded)
I installed freebsd FreeBSD in a RAID1 setup created using the controller utility and I had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.