Search results

  1. jjjesss

    bhyve Is it possible to passthrough USB devices using a dedicated ExpressCard USB host contoller in bhyve?

    I would need to know if it is possible or not to passthrough usb devices in bhyve, when they are connected to a dedicated ExpressCard USB controller (as my computer is a thinkpad laptop). And if so, any ExpressCard USB brand/model recommendation? Thanks in advance, Jes
  2. jjjesss

    Static IP configuration missing when interface is down

    ifconfig_pflog0="SYNCDHCP" ... yes, a stupid thing... probably result of search/replace ifconfig ocurrences or something like that in the past... fixed now, thanks tun0 is for openvpn interface device... probably is not needed... comented. bastille0... right... fixed as well hald and polkit...
  3. jjjesss

    Static IP configuration missing when interface is down

    Hi: No, any rule regarding em0 or something related to network interfaces. Fixed the hostname duplication... thanks.
  4. jjjesss

    Static IP configuration missing when interface is down

    Hi: Attached my rc.conf in one of the laptops. Thanks, Jes
  5. jjjesss

    Static IP configuration missing when interface is down

    Hi all: I have a very strange issue since a lot of time. I have two laptops with a similar configuration (most of it was copied from one to another). The problem is when I configure an static IP in the em0 interface of both laptops via /etc/rc.conf or manually in the console. If the laptops...
  6. jjjesss

    VirtualGL + Wine

    Thanks, I'll test vglrun with a script like yours. About 64bit wine... I don't know the reason but only with the i386-wine, and after run /usr/local/share/wine/patch-nvidia.sh I'm able to get 3d accel in the windows application. And the windows application is a 32bit one. With 64bit there's no...
  7. jjjesss

    VirtualGL + Wine

    To execute a windows application with wine but with 3D acceleration. So I launch a X server with xorg.conf.nv in display 8, and then run the app with wine as follows: /usr/local/VirtualGL/bin/vglrun -d ":8" wine myapplication myapplication needs 3D acceleration to be executed. In another...
  8. jjjesss

    VirtualGL + Wine

    Thanks shkhIn, but I'm not able to success in this. I'll keep trying it. Thanks again, Jes
  9. jjjesss

    VirtualGL + Wine

    I've thought in the 32bit package, in fact I've downloaded, but the libs are named equal as the 64bit. Where shoud I place them?, should I rename them?. Contents of the 32bit package are:
  10. jjjesss

    VirtualGL + Wine

    Hi: I'm able to run VirtualGL in my FreeBSD 11.2 64bit. But I can't with wine. My intention is to be able to run windows applications that requires 3d acceleration, but it seems there's some problem with glx. When execute the windows application with vglrun the wine window opens and shows an...
  11. jjjesss

    USB EHCI not working in 10.3 / 11.0RC2

    Hi: I've found it. I didn't remember one setting I put in /etc/sysctl.conf: hw.usb.ehci.no_hs=1 I put this setting to be able to use USB 2.0 devices in VirtualBox OSE. But this setting makes USB devices not detected after resume. Setting it to 0 and another suspend/resume cycle and USB...
  12. jjjesss

    USB EHCI not working in 10.3 / 11.0RC2

    I'm dealing with an annoying problem in my Thinkpad T420s, any USB 2.0 (EHCI) port works, only the 3.0 works well. I can understand it. Yesterday everything run perfectly. The laptop has dual boot, with Linux in another disk. In Linux the USB ports work well. I've just finished to upgrade to...
  13. jjjesss

    Turn Off Nvidia Quadro 4200

    Yes, I can switch on/off in bios, but what I'm trying to obtain is with optimus mode activated in bios, get able to turn off the nvidia card. The laptop has another operating system that use Nvidia card. I'd prefer let bios untouched and be able to turn off the nvidia card in FreeBSD (if possible).
  14. jjjesss

    Turn Off Nvidia Quadro 4200

    I forgot mentioning my system is FreeBSD 10.3-RELEASE-p7 amd64. And, when the nvidia optimus is disabled in bios, and only integrated card is available, the power consumption is reduced from ~1380mw to ~890mw.
  15. jjjesss

    Turn Off Nvidia Quadro 4200

    Hi all: I'm struggling with this problem and I'm not able to fix it. In order to get the maximum power saving I followed the instructions of this well known article: https://wiki.freebsd.org/TuningPowerConsumption But I can't turn off the nvidia chip. My laptop is a Thinkpad T420s with and...
  16. jjjesss

    auto mounting in Openbox

    This is great! about BSD license I have no problems with it so... and Aragon seems to be missing lately :) I can't wait for PC-BSD 9 and try this but... now that my system is 100% functional I'm wonder if I will can update the system without impact... Thanks Kris BR
  17. jjjesss

    auto mounting in Openbox

    I like KDE, but it's a bit heavy for my laptop. The scripts to mount/umount devices included in this posts are very useful but need to be improved. In my opinion there's no need to reinvent wheel or build big software layers only to mount devices. Tools like these, with improvements, is all...
  18. jjjesss

    auto mounting in Openbox

    Thanks should go to aragon, the guy who programed the 'amount' and 'amountd'. I only made a few hacks to work with xfce4. About the 'ports'... aragon is author of the original code. So... I'm not very confortable publishing it in other site or so, only here, where aragon shared it with us...
  19. jjjesss

    auto mounting in Openbox

    New update. Now two icons are created on the desktop when a drive is mounted. One is to unmount it and the another one is to explore the media with Thunar. openthunar.sh can be customized to replace Thunar with whichever file manager. BR
  20. jjjesss

    auto mounting in Openbox

    aragon, one question: amountd intends to mount devices like /dev/adaxxx, for example, in my computer, /dev/ada0s3.journal. According to the code it seems only devices starting by da or in my hack mmcsd, so any ada device should be watched by amountd. So, why does this happen? I don't want...
Back
Top