Search results

static_routes="LAN2" route_kvm="-net 10.0.1.0/24 10.0.0.1" kvm is not defined, should be LAN2 static_routes="LAN2" route_LAN2="-net 10.0.1.0/24 10.0.0.1" You also need to setup default route, so the following is correct syntax: defaultrouter="your-default-route-here" static_routes="lan1 lan2"...

Also, do not forget to check FreeBSD HCL @ http://www.freebsd.org/releases/8.0R/hardware.html

fio is much better tool and and it can produce in graphs format too, for certain condition I'm touching around 0.5GB with 4 disks (73GB x 15K SAS with 512MB memory adaptech 5xxxZ card) in RAID10.

You need to edit /etc/fstab and point it to /archives. Once done type umount /disk2 mkdir /archives mount /dev/da1s1d /archives df

Your error and workaround are listed below (search for DMA timeout on those pages): http://wiki.freebsd.org/BugBusting/Commonly_reported_issues http://wiki.freebsd.org/JeremyChadwick/ATA_issues_and_troubleshooting

The driver is included with FreeBSD 8.0. You need to add the following line in your /boot/loader.conf: if_alc_load="YES" See alc for installation and usage info.

Did you created ~/.xsession file? See http://www.freebsd.org/doc/en/books/handbook/x11-wm.html

Read http://www.freebsd.org/doc/en/books/handbook/mail.html and http://www.purplehat.org/?page_id=4

Try export http_proxy='http://user:password@server.ip.address:port/' Another options is prtunnel, http://www.cyberciti.biz/faq/updating-freebsd-source-tree-via-proxyserver/

Try in rc.conf ipv6_ifconfig_em0="2001:470:1e04:5ea::10 prefix 80" Or at shell: ifconfig em0 inet6 001:470:1e04:5ea::10 prefixlen 80 Replace em0 and ips with your actual setup. Ref: http://www.kame.net/~suz/freebsd-ipv6-config-guide.txt...

You see I don't make corporate decisions. It is always made by some guy seating at 10th floor. If they told me to install Windows 2008, I will have to install it and configure it. It is all about marketing and big buzz words. Linux and Redhat are one of those buzz words. Slackware is much better...

Nothing is wrong; zfs v13 is for v8.1; the zfs v15 is in current so you will not get zfs 15 in stable version.

+1 for freebsd ports. I totally agree with phoenix. Just other day I wanted to remove few services / unwanted software from RHEL and so when I run yum remove packageName; it told me it will remove over 258 packages (there are total 329 packages installed) to just get rid of two things...

HAST looks a lot like DRBD for FreeBSD. I'm gonna play with this weekend :)

This is what we have in most servers here If you are not doing any critical stuff, pick up lower or mid range.

The default stripe size is good for most apps. However, if you are going to store and read large files increase stripe size to 1024 (this depends upon your card too, see RAID bios). This blog post and comments offers lots of info about strip sizes...

Intel GigE is standard on most server and mid level desktop boards too. They really works great.

I'm deploying RHEL, CentOS guests using kickstart. I wanted same kind automation for FreeBSD guests. I will test it out and let you know if this works or not. Sadly cobbler has not included support for FreeBSD https://fedorahosted.org/cobbler/ticket/582 ; otherwise it is great system. Thanks!

Compare to Google forums / mailing list / groups spam is under control here ;) I stopped visiting comp.unix.* because of spam. Google should have done a better job. Also, my ISP stopped news servers service last year :(

What you need is freebsd jail based or freebsd vps server. This kind of server gives you full ssh access with ports and tree. You can install whatever you want. Try the following http://www.johncompanies.com/ (used for personal stuff) - reliable and economically priced...