I tried understanding why I am not getting sound, and I read about setting these pins which I never had to do before, i have been messing with this all day and I am so frustrated. Can somebody help me please? I do not use nvidia for sound. I use realtek not nvidia, the sound needs to come out of pcm3, thats whats plugged in. I tried putting things in rc.conf, etc/sysctl.conf /boot/device.hints. Nothing works so far.
[/CODE]
these are the modules I have loaded. I have sound, snd_ich, and snd_hda IN a custom kernel.
This is in rc.conf
Thank you so much for anybody that can help me this has been very frustrating today.
Code:
$ dmesg | grep hdac
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 numa-domain 0 on pci3
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb230000-0xfb233fff irq 22 at device 27.0 numa-domain 0 on pci1
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 numa-domain 0 on pci3
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb230000-0xfb233fff irq 22 at device 27.0 numa-domain 0 on pci1
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
$
Code:
cat /dev/sndstat
Installed devices:
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> (play)
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> (play)
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> (play)
pcm3: <Realtek ALC1150 (Rear Analog 5.1/2.0)> (play/rec) default
pcm4: <Realtek ALC1150 (Front Analog)> (play/rec)
pcm5: <Realtek ALC1150 (Digital)> (play)
pcm6: <Realtek ALC1150 (Rear Digital)> (play)
No devices installed from userspace.
$
I have a simple setup. I dont need headphones or anything else. I just want my sound to come out of pcm3 thats where its plugged in.
here is my pins if you need them.
[CODE]em0: link state changed to UP
hdaa1: Dumping AFG pins:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 17 18561130 3 0 Digital-out Jack Digital 0x18 Black 1
hdaa1: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa1: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa1: Caps: IN OUT HP EAPD Sense: 0x80000000 (connected)
hdaa1: 21 01011012 1 2 Line-out Jack 1/8 Rear Black 0
hdaa1: Caps: IN OUT Sense: 0x00000000 (disconnected)
hdaa1: 22 01016011 1 1 Line-out Jack 1/8 Rear Orange 0
hdaa1: Caps: IN OUT Sense: 0x00000000 (disconnected)
hdaa1: 23 40040000 0 0 Line-out None RCA 0x00 Unknown 0 DISA
hdaa1: Caps: IN OUT Sense: 0x00000000 (disconnected)
hdaa1: 24 01a19050 5 0 Mic Jack 1/8 Rear Pink 0
hdaa1: Caps: IN OUT VREF Sense: 0x00000000 (disconnected)
hdaa1: 25 02a19060 6 0 Mic Jack 1/8 Front Pink 0
hdaa1: Caps: IN OUT HP VREF Sense: 0x00000000 (disconnected)
hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0
hdaa1: Caps: IN OUT VREF Sense: 0x00000000 (disconnected)
hdaa1: 27 02214020 2 0 Headphones Jack 1/8 Front Green 0
hdaa1: Caps: IN OUT HP EAPD VREF Sense: 0x00000000 (disconnected)
hdaa1: 30 01456140 4 0 SPDIF-out Jack Optical Rear Orange 1
hdaa1: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa1: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa1: GPIO0: disabled
hdaa1: GPIO1: disabled
sonewconn: pcb 0xfffff8000dc664b0: Listen queue overflow: 8 already in queue awaiting acceptance (1 occurrences)
$
[/CODE]
these are the modules I have loaded. I have sound, snd_ich, and snd_hda IN a custom kernel.
Code:
$ kldstat
Id Refs Address Size Name
1 29 0xffffffff80200000 1d68b78 kernel
2 1 0xffffffff82511000 f4f59 nvidia-modeset.ko
3 1 0xffffffff82606000 c45ec8 nvidia.ko
4 2 0xffffffff8324c000 37528 linux.ko
5 2 0xffffffff83284000 2d28 linux_common.ko
6 1 0xffffffff83287000 2328 ums.ko
7 1 0xffffffff8328a000 1780 uhid.ko
8 1 0xffffffff8328c000 9e8 pflog.ko
9 1 0xffffffff8328d000 2fa58 pf.ko
10 1 0xffffffff832bd000 31e50 linux64.ko
$
This is in rc.conf
Code:
### SOUND ###
snddetect_enable="YES"
mixer_enable="YES"
Thank you so much for anybody that can help me this has been very frustrating today.