Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 r278031: Sun Feb 1 18:24:33 UTC 2015 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115 WARNING: WITNESS option enabled, expect reduced performance. VT: running with driver "vga". CPU: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz (2094.80-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xbfebfbff Features2=0xc08e3bd AMD Features=0x20100800 AMD Features2=0x1 VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8083808256 (7709 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard random: entropy device infrastructure driver random: selecting highest priority adaptor kbd1 at kbdmux0 netmap: loaded module random: SOFT: yarrow init() random: selecting highest priority adaptor module_register_init: MOD_LOAD (vesa, 0xffffffff80dd85a0, 0) error 19 vtvga0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 cpu0: on acpi0 cpu1: on acpi0 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x1800-0x1807 mem 0xf2400000-0xf27fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 131068k stolen memory drm0: on vgapci0 info: [drm] MSI enabled 1 message(s) info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci0: Boot video device vgapci1: mem 0xf2100000-0xf21fffff at device 2.1 on pci0 uhci0: port 0x1820-0x183f irq 16 at device 26.0 on pci0 usbus0 on uhci0 uhci1: port 0x1840-0x185f irq 21 at device 26.1 on pci0 usbus1 on uhci1 uhci2: port 0x1860-0x187f irq 19 at device 26.2 on pci0 usbus2 on uhci2 ehci0: mem 0xf2a04800-0xf2a04bff irq 19 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 hdac0: mem 0xf2a00000-0xf2a03fff irq 22 at device 27.0 on pci0 pcib1: irq 17 at device 28.0 on pci0 pci2: on pcib1 sdhci_pci0: mem 0xf2300400-0xf23004ff irq 16 at device 0.2 on pci2 sdhci_pci0: 1 slot(s) allocated pcib2: irq 16 at device 28.1 on pci0 pci3: on pcib2 iwn0: mem 0xf2200000-0xf2201fff irq 17 at device 0.0 on pci3 pcib3: irq 18 at device 28.2 on pci0 pci4: on pcib3 pcib4: irq 19 at device 28.3 on pci0 pci5: on pcib4 pcib5: irq 17 at device 28.4 on pci0 pci6: on pcib5 pcib6: irq 16 at device 28.5 on pci0 pci8: on pcib6 re0: port 0x3000-0x30ff mem 0xf2004000-0xf2004fff,0xf2000000-0xf2003fff irq 17 at device 0.0 on pci8 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x28000000 re0: MAC rev. 0x00100000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c8:0a:a9:4e:e6:93 001.000047 [2718] netmap_attach success for re0 tx 1/256 rx 1/256 queues/slots uhci3: port 0x1880-0x189f irq 23 at device 29.0 on pci0 usbus4 on uhci3 uhci4: port 0x18a0-0x18bf irq 19 at device 29.1 on pci0 usbus5 on uhci4 uhci5: port 0x18c0-0x18df irq 18 at device 29.2 on pci0 usbus6 on uhci5 ehci1: mem 0xf2a04c00-0xf2a04fff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib7: at device 30.0 on pci0 pci9: on pcib7 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf2a04000-0xf2a047ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ahciem0: on ahci0 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: at iomem 0xd0000-0xd0fff,0xe0000-0xe1fff,0xe2000-0xe37ff on isa0 ppc0: cannot reserve I/O port range est0: on cpu0 est1: on cpu1 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 20,21 and 18 on hdaa0 pcm1: at nid 24 on hdaa0 hdacc1: at cad 3 on hdac0 hdaa1: at nid 1 on hdacc1 pcm2: at nid 3 on hdaa1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 ugen7.1: at usbus7 uhub7: on usbus7 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number 100407PBN2043SHVS03T ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: Serial Number M2UA3HC5553 cd0: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uma_zalloc_arg: zone "64" with the following non-sleepable locks held: exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff814c7660) locked @ /usr/src/sys/dev/vt/vt_core.c:2545 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff81c34a00 witness_warn() at witness_warn+0x4ae/frame 0xffffffff81c34ad0 uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xffffffff81c34b40 malloc() at malloc+0x192/frame 0xffffffff81c34b90 eventhandler_register() at eventhandler_register+0x34/frame 0xffffffff81c34bd0 vt_upgrade() at vt_upgrade+0x43e/frame 0xffffffff81c34c50 mi_startup() at mi_startup+0x118/frame 0xffffffff81c34c70 btext() at btext+0x2c uma_zalloc_arg: zone "128" with the following non-sleepable locks held: exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff814c7660) locked @ /usr/src/sys/dev/vt/vt_core.c:2545 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff81c34a00 witness_warn() at witness_warn+0x4ae/frame 0xffffffff81c34ad0 uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xffffffff81c34b40 malloc() at malloc+0x192/frame 0xffffffff81c34b90 eventhandler_register() at eventhandler_register+0x104/frame 0xffffffff81c34bd0 vt_upgrade() at vt_upgrade+0x43e/frame 0xffffffff81c34c50 mi_startup() at mi_startup+0x118/frame 0xffffffff81c34c70 btext() at btext+0x2c uma_zalloc_arg: zone "64" with the following non-sleepable locks held: exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff814c7660) locked @ /usr/src/sys/dev/vt/vt_core.c:2545 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff81c34a00 witness_warn() at witness_warn+0x4ae/frame 0xffffffff81c34ad0 uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xffffffff81c34b40 malloc() at malloc+0x192/frame 0xffffffff81c34b90 eventhandler_register() at eventhandler_register+0x34/frame 0xffffffff81c34bd0 vt_upgrade() at vt_upgrade+0x45c/frame 0xffffffff81c34c50 mi_startup() at mi_startup+0x118/frame 0xffffffff81c34c70 btext() at btext+0x2c random: unblocking device. SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 2094802605 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus7 usbus3 uhub7: 6 ports with 6 removable, self powered Root mount waiting for: usbus7 ugen7.2: at usbus7 umass0: on usbus7 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:5:0: Attached to scbus5 Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... mountroot: waiting for device /dev/ufs/FreeBSD_Install ... da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: Serial Number 5B731AB1314C da0: 40.000MB/s transfers da0: 984MB (2015232 512 byte sectors: 64H 32S/T 984C) da0: quirks=0x3 GEOM: da0: the secondary GPT header is not in the last LBA. GEOM: diskid/DISK-5B731AB1314C: the secondary GPT header is not in the last LBA. GEOM: diskid/DISK-5B731AB1314C: the secondary GPT header is not in the last LBA. GEOM: diskid/DISK-5B731AB1314C: the secondary GPT header is not in the last LBA.