(II) VESA(0): Total Memory: 127 64KB banks (8128kB)
(II) VESA(0): Monitor0: Using hsync range of 30.00-80.00 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-80.00 Hz
(II) VESA(0): Not using mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync range of 30.00-80.00 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-80.00 Hz
(II) VESA(0): Not using mode "1024x768" (no mode of this name)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): Display dimensions: (220, 130) mm
(**) VESA(0): DPI set to (92, 117)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (115)
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (112)
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/local/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) UnloadModule: "nv"
(II) Unloading /usr/local/lib/xorg/modules/drivers/nv_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(==) VESA(0): Write-combining range (0xa0000,0x20000) was already clear
(II) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8128 kB
(II) VESA(0): VESA VBE OEM: Intel(r)PineView Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)PineView Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): virtual address = 0x29400000,
physical address = 0xd0000000, size = 8323072
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) VESA(0): DPMS enabled
(WW) VESA(0): Option "HWcursor" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) LoadModule: "mousedrv"
(WW) Warning, couldn't open module mousedrv
(II) UnloadModule: "mousedrv"
(EE) Failed to load module "mousedrv" (module does not exist, 0)
(EE) No input driver matching `mouse_drv'
(II) config/hal: Adding input device USB OPTICAL MOUSE
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/gnome-settings-daemon-2.0/libmouse.so
(EE) LoadModule: Module mouse does not have a mouseModuleData data object.
(II) UnloadModule: "mouse"
(II) Unloading /usr/local/lib/gnome-settings-daemon-2.0/libmouse.so
(EE) Failed to load module "mouse" (invalid module, 0)
(EE) No input driver matching `mouse'
(EE) config/hal: NewInputDeviceRequest failed (15)
(II) config/hal: Adding input device AT Keyboard
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/drivers/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) AT Keyboard: Protocol: standard
(**) Option "XkbRules" "base"
(**) AT Keyboard: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) AT Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) AT Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) AT Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
(II) config/hal: Adding input device PS/2 Mouse
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/gnome-settings-daemon-2.0/libmouse.so
(EE) LoadModule: Module mouse does not have a mouseModuleData data object.
(II) UnloadModule: "mouse"
(II) Unloading /usr/local/lib/gnome-settings-daemon-2.0/libmouse.so
(EE) Failed to load module "mouse" (invalid module, 0)
(EE) No input driver matching `mouse'
(EE) config/hal: NewInputDeviceRequest failed (15)
(==) VESA(0): Write-combining range (0x0,0x1000) was already clear