problem dificult , i cant solve xorg !

h7t_2002 · Nov 24, 2012

i config xorg same as handbook, both xorg.conf & rc.conf
i installed gnome2, xfce4
-------------------------------------------------------
but after reboot, after i login with root, pw, the black screen is show (i dont type startx, dont anything, i login and this take,...)
help me !

Deleted member 13721 · Nov 24, 2012

The screen is black?, are there words on the screen? Otherwise you have some serious issues with that install.

wblock@ · Nov 24, 2012

There is not enough information given to figure out the problem. Does pressing ctrl-alt-f1 switch back to the console?

What version of FreeBSD? What entries are in /etc/rc.conf?

A guess is that some kind of login manager is being started from rc.conf, and a misconfigured X is showing a blank screen.

h7t_2002 · Nov 24, 2012

press Ctrl + Alt + F1, but nothing change, no show console, i instal freeBSD 9.0, i install xorg, i configed true with handbook, but error, after login, the black screen show, althought i dont type startx ...

h7t_2002 · Nov 24, 2012

check xorg -config xorg.conf.new is also the blackscreen, no curros, please fix....

h7t_2002 · Nov 24, 2012

my computer:
screen: intel ivybridge and nvidia geforce 610 M
help me ???

wblock@ · Nov 24, 2012

Still not enough information, but better.

Show the contents of /etc/rc.conf.
For now, I would also turn off the onboard Intel graphics in the BIOS.

h7t_2002 · Nov 24, 2012

i only install bsd, so, i cant remember the rc.conf to show, ... you can show me one standar rc.conf for nvidia and xorg.conf, standar, ...

Beeblebrox · Nov 24, 2012

We want to help but you must explain more simple because "all you write is mixed".
Answer these yes/no/NU (not understood)
1. do you have login at start?
2. do you have the boot manager (BTX) select for single user?

Please write every problem separate...

wblock@ · Nov 24, 2012

When the computer starts, wait for the boot menu to be shown. It looks like this: http://www.freebsd.org/doc/en_US.IS...nstall-start.html#bsdinstall-boot-loader-menu

When that shows, press 6. When it asks for a shell, press Enter. Then do this:
# cat /etc/rc.conf

What does that show?

Deleted member 13721 · Nov 25, 2012

h7t_2002 said:
my computer:
screen: intel ivybridge and nvidia geforce 610 M
help me ???

You have a hybrid graphics laptop. Presumably Intel HD4000. If your X is misconfigured, the screen will go black, when you try to startx and you won't be able to do anything without rebooting or SSH'ing in to reboot. The good news is, that it will work, if it's configured correctly.

wblock@ · Nov 25, 2012

Oh, it's a laptop. h7t_2002, this is the type of information that is needed.

UNIXgod · Nov 25, 2012

Using vesa temporarily might work until you find the solution for your configuration

Deleted member 13721 · Nov 25, 2012

Here, take my +1 mace.

. This config worked for me on Intel IvyBridge HD4000.

Code:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option          "AutoAddDevices" "false"
        Option          "AutoEnableDevices" "false"
EndSection

Section "Files"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/lib/X11/fonts/misc/"
        FontPath     "/usr/local/lib/X11/fonts/TTF/"
        FontPath     "/usr/local/lib/X11/fonts/OTF/"
        FontPath     "/usr/local/lib/X11/fonts/Type1/"
        FontPath     "/usr/local/lib/X11/fonts/100dpi/"
        FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "dri2"
        Load  "extmod"
        Load  "record"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
EndSection

Section "ServerFlags"
        Option          "DRI2"          "True"
        Option          "AIGLX"         "True"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "DRI"                       # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "VideoKey"                  # <i>
        Option     "FallbackDebug"      "True"  # [<bool>]
        #Option     "Tiling"                    # [<bool>]
        #Option     "LinearFramebuffer"         # [<bool>]
        #Option     "Shadow"                    # [<bool>]
        #Option     "SwapbuffersWait"           # [<bool>]
        #Option     "TripleBuffer"              # [<bool>]
        #Option     "XvPreferOverlay"           # [<bool>]
        #Option     "DebugFlushBatches" "True"  # [<bool>]
        #Option     "DebugFlushCaches"  "True"  # [<bool>]
        #Option     "DebugWait" "True"          # [<bool>]
        #Option     "HotPlug"                   # [<bool>]
        #Option     "RelaxedFencing"            # [<bool>]
        Option      "AccelMethod" "sna"
        Identifier  "Card0"
        Driver      "intel"
        BusID       "PCI:0:2:0"              # YOU WILL HAVE TO CHECK THIS!
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Depth     32
        EndSubSection
EndSection

h7t_2002 · Nov 25, 2012

my laptop is ASUS K45VD core i5 3210M

card nvidia geforce 610M
intel ivybrigde HD
-------------------------------------------------------------------------------------------
I only type: #Xorg -configure
and i dont config, because i dont want you to difficult to fix

because install error, i have reinstalled today, so, the config is default now, i dont edit, and i will guide from you ....
the rc.conf is default
the xorg.conf.new is default

Code:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" Right "Screen" 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/lib/X11/fonts/misc/"
        FontPath     "/usr/local/lib/X11/fonts/TTF/"
        FontPath     "/usr/local/lib/X11/fonts/OTF/"
        FontPath     "/usr/local/lib/X11/fonts/Type1/"
        FontPath     "/usr/local/lib/X11/fonts/100dpi/"
        FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "dri2"
        Load  "extmod"
        Load  "record"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
EndSection
Section "ServerFlags"
        Option          "DRI2"          "True"
        Option          "AIGLX"         "True"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "DRI"                       # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "VideoKey"                  # <i>
        Option     "FallbackDebug"      "True"  # [<bool>]
        #Option     "Tiling"                    # [<bool>]
        #Option     "LinearFramebuffer"         # [<bool>]
        #Option     "Shadow"                    # [<bool>]
        #Option     "SwapbuffersWait"           # [<bool>]
        #Option     "TripleBuffer"              # [<bool>]
        #Option     "XvPreferOverlay"           # [<bool>]
        #Option     "DebugFlushBatches" "True"  # [<bool>]
        #Option     "DebugFlushCaches"  "True"  # [<bool>]
        #Option     "DebugWait" "True"          # [<bool>]
        #Option     "HotPlug"                   # [<bool>]
        #Option     "RelaxedFencing"            # [<bool>]
        Option      "AccelMethod" "sna"
        Identifier  "Card0"
        Driver      "intel"
        BusID       "PCI:0:2:0"              # YOU WILL HAVE TO CHECK THIS!
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "DRI"                       # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "VideoKey"                  # <i>
        Option     "FallbackDebug"      "True"  # [<bool>]
        #Option     "Tiling"                    # [<bool>]
        #Option     "LinearFramebuffer"         # [<bool>]
        #Option     "Shadow"                    # [<bool>]
        #Option     "SwapbuffersWait"           # [<bool>]
        #Option     "TripleBuffer"              # [<bool>]
        #Option     "XvPreferOverlay"           # [<bool>]
        #Option     "DebugFlushBatches" "True"  # [<bool>]
        #Option     "DebugFlushCaches"  "True"  # [<bool>]
        #Option     "DebugWait" "True"          # [<bool>]
        #Option     "HotPlug"                   # [<bool>]
        #Option     "RelaxedFencing"            # [<bool>]
        Option      "AccelMethod" "sna"
        Identifier  "Card1"
        Driver      "nvidia"
        BusID       "PCI:1:0:0"              # YOU WILL HAVE TO CHECK THIS!
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                ....
                Depth     24
        EndSubSection
Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
        Monitor    "Monitor1"
        SubSection "Display"
                .....
                Depth     24
        EndSubSection

EndSection

because before, I config is error, so, now, I will config from guide of you, please show me, thank

h7t_2002 · Nov 25, 2012

because dont remember true, at top, i only write 1 exam

UNIXgod · Nov 25, 2012

h7t_2002 said:
because before, i config is error, so, now, i will config from guide of you, please show me, thank

http://www.freebsd.org/doc/en/articles/compiz-fusion/nvidia-setup.html

Note: Although not strictly necessary, you may also wish to install x11/nvidia-xconfig and x11/nvidia-settings ports. The former can assist you in writing settings to /etc/X11/xorg.conf from the command line, and the latter will allow you to modify screen settings from a GUI while running the Xorg system.

Deleted member 13721 · Nov 25, 2012

So did it work?

h7t_2002 · Nov 25, 2012

zspider said:
So did it work?

i take error when install xorg in backtrack5, so, you or any try to install xorg in asus k45vd, and, help me, give 1 file xorg.conf standáº£, i thank

h7t_2002 · Nov 25, 2012

when type Xorg -configure, show: number of created screens does not match number of detected devices. configuration failed

UNIXgod · Nov 25, 2012

h7t_2002 said:
when type Xorg -configure, show: number of created screens does not match number of detected devices. configuration failed

Install x11/nvidia-xconfig and run that instead. It will make a good configuration for you.

# cd /usr/ports/x11/nvidia-xconfig
# make install
# rehash
# nvidia-xconfig

h7t_2002 · Dec 5, 2012

Firt, my laptop have 2 cards, card nvidia geforce 610M and intel ivybrigde HD --> I want to use this card !
-------------------------------
Second, my config:
In /root/rc.conf

Code:

gdm_enable="YES"
...

In /etc/X11/xorg.conf

Code:

Section "ServerLayout" 
        Identifier     "X.org Configured" 
        Screen      1  "Screen1" 0 0 
        InputDevice    "Mouse0" "CorePointer" 
        InputDevice    "Keyboard0" "CoreKeyboard" 
        Option         "AutoAddDevices" "false"
        Option         "AutoEnableDevices" "false"
EndSection 

Section "Files" 
        ModulePath   "/usr/local/lib/xorg/modules" 
        FontPath     "/usr/local/lib/X11/fonts/misc/" 
        FontPath     "/usr/local/lib/X11/fonts/TTF/" 
        FontPath     "/usr/local/lib/X11/fonts/OTF/" 
        FontPath     "/usr/local/lib/X11/fonts/Type1/" 
        FontPath     "/usr/local/lib/X11/fonts/100dpi/" 
        FontPath     "/usr/local/lib/X11/fonts/75dpi/" 
EndSection 

Section "Module" 
        Load  "dbe" 
        Load  "dri" 
        Load  "dri2" 
        Load  "extmod" 
        Load  "record" 
        Load  "glx" 
EndSection 

Section "InputDevice" 
        Identifier  "Keyboard0" 
        Driver      "kbd" 
EndSection 

Section "InputDevice" 
        Identifier  "Mouse0" 
        Driver      "mouse" 
        Option      "Protocol" "auto" 
        Option      "Device" "/dev/sysmouse" 
        Option      "ZAxisMapping" "4 5 6 7" 
EndSection 

Section "Monitor" 
        Identifier   "Monitor1" 
EndSection 
 
Section "Device"  
        Identifier  "Card1" 
        Driver      "vesa" 
        BusID       "PCI:0:2:0"      
EndSection 

Section "Screen" 
        Identifier "Screen1" 
        Device     "Card1" 
        Monitor    "Monitor1" 
        SubSection "Display" 
                ..... 
                Depth     32
                Modes    "1024x768"
        EndSubSection 
EndSection

In /var/log/Xorg.0.log

Code:

...
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
...
(WW) VESA(0): Unable to estimate virtual size

And Finally:
Type:
# Xorg -config /etc/X11/xorg.conf

Show: black-screen, no cursor , ... Press Ctrl+Alt+Backspace is nothing do ...
Helpe me fix !

wblock@ · Dec 5, 2012

These dual-card notebook setups are known as "Optimus". The only hope of making it work is if the BIOS allows you to disable one of the cards, probably the NVidia. Then set up for the Intel card as usual. It needs KMS. See http://forums.freebsd.org/showpost.php?p=187947&postcount=3.

h7t_2002 · Dec 5, 2012

wblock@ said:
These dual-card notebook setups are known as "Optimus". The only hope of making it work is if the BIOS allows you to disable one of the cards, probably the NVidia. Then set up for the Intel card as usual. It needs KMS. See http://forums.freebsd.org/showpost.php?p=187947&postcount=3.

my bios don't have option to disable any card, what I to do to solve ?

wblock@ · Dec 5, 2012

Contact ASUS and ask them to add it. Failing that, use Windows as an OS and run FreeBSD as a VM with VirtualBox.

problem dificult , i cant solve xorg !

h7t_2002

Deleted member 13721

Guest

wblock@

h7t_2002

h7t_2002

h7t_2002

wblock@

h7t_2002

Beeblebrox

wblock@

Deleted member 13721

Guest

wblock@

UNIXgod

Deleted member 13721

Guest

h7t_2002

h7t_2002

UNIXgod

Deleted member 13721

Guest

h7t_2002

h7t_2002

UNIXgod

h7t_2002

wblock@

h7t_2002

wblock@