1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SONY VGN-C2 bluetooth problem

Discussion in 'Mobile Computing' started by ruthr, Oct 22, 2012.

  1. ruthr

    ruthr New Member

    Messages:
    22
    Likes Received:
    0
    Hello .. i have problem with bluetooth on vgn-c2z/b laptop..

    Code:
    FreeBSD brzi.nmw 10.0-CURRENT FreeBSD 10.0-CURRENT #8 r241892M: Mon Oct 22 19:15:39 UTC 2012     root@brzi.nmw:/usr/obj/usr/src/sys/PILA  amd64
    i have module ng_ubt in loader.conf. output from kldstat:

    Code:
    root@brzi:/root # kldstat
    Id Refs Address            Size     Name
     1   42 0xffffffff80200000 101de30  kernel
     2    1 0xffffffff8121e000 1dd8     splash_pcx.ko
     3    1 0xffffffff8126b000 20f8     acpi_sony.ko
     4    1 0xffffffff8126e000 ee77b0   nvidia.ko
     5    5 0xffffffff82156000 12f300   linux.ko
     6    1 0xffffffff82286000 8090     ng_ubt.ko
     7    2 0xffffffff8228f000 f598     ng_hci.ko
     8    4 0xffffffff8229f000 2dc8     ng_bluetooth.ko
     9    6 0xffffffff822a2000 15048    netgraph.ko
    10    1 0xffffffff82412000 3aab     linprocfs.ko
    11    1 0xffffffff82416000 98b      linsysfs.ko
    12    1 0xffffffff82417000 a677     ng_l2cap.ko
    13    1 0xffffffff82422000 1666b    ng_btsocket.ko
    14    1 0xffffffff82439000 1c67     ng_socket.ko
    15    1 0xffffffff8243b000 6c0      
    root@brzi:/root #
    output from usbconfig dump_device_desc :
    Code:
    ugen3.2: <UGX ALPS> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
    
      bLength = 0x0012 
      bDescriptorType = 0x0001 
      bcdUSB = 0x0200 
      bDeviceClass = 0x00e0 
      bDeviceSubClass = 0x0001 
      bDeviceProtocol = 0x0001 
      bMaxPacketSize0 = 0x0040 
      idVendor = 0x044e 
      idProduct = 0x300d 
      bcdDevice = 0x1915 
      iManufacturer = 0x0001  <ALPS>
      iProduct = 0x0002  <UGX>
      iSerialNumber = 0x0003  <01b2b7c6>
      bNumConfigurations = 0x0001 
    
    
    ngctl li show ubt0
    Code:
    root@brzi:/root # ngctl li                                                      
    There are 6 total nodes:
      Name: btsock_hci_raw  Type: btsock_hci_raw  ID: 00000002   Num hooks: 0
      Name: btsock_l2c_raw  Type: btsock_l2c_raw  ID: 00000003   Num hooks: 0
      Name: btsock_l2c      Type: btsock_l2c      ID: 00000004   Num hooks: 0
      Name: ngctl2714       Type: socket          ID: 00000065   Num hooks: 0
      Name: btsock_sco      Type: btsock_sco      ID: 00000005   Num hooks: 0
      Name: ubt0            Type: ubt             ID: 0000005f   Num hooks: 0
    root@brzi:/root # 
    
    and now problem is that i don't have /dev/ub* device.. devd is running .. i have tried to manualy set vendor and product id in usb/usbdevs 0x044e 0x300d ALPS/UGPZ6 (from linux usb.ids) but same thing after recompiled kernel(Unknown device in dmesg).

    dmesg:
    Code:
    Oct 22 20:02:33 brzi kernel: ugen3.2: <ALPS> at usbus3
    Oct 22 20:02:33 brzi kernel: ubt0: <ALPS UGX, class 224/1, rev 2.00/19.15, addr 2> on usbus3
    Oct 22 20:02:33 brzi root: Unknown USB device: vendor 0x044e product 0x300d bus uhub3
    Oct 22 20:03:33 brzi kernel: ubt0: ubt_bulk_read_callback:879: bulk-in transfer failed: USB_ERR_STALLED
    Oct 22 20:03:33 brzi kernel: ubt0: ubt_intr_read_callback:779: interrupt transfer failed: USB_ERR_STALLED
    
    any ideas how to fix these ?
     
  2. ruthr

    ruthr New Member

    Messages:
    22
    Likes Received:
    0
    i forget to attach output from service bluetooth onestart:
    Code:
    Oct 22 20:47:51 brzi root: /etc/rc.d/bluetooth: ERROR: Unsupported device:
     
  3. ruthr

    ruthr New Member

    Messages:
    22
    Likes Received:
    0
    got it working .. i forget to start hcsecd daemon..