1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

mounting an ext3 partition

Discussion in 'General' started by Anonymous, May 17, 2010.

  1. Anonymous

    Anonymous Guest

    Code:
    freebsd-2# fdisk
    ******* Working on device /dev/ad0 *******
    parameters extracted from in-core disklabel are:
    cylinders=77622 heads=16 sectors/track=63 (1008 blks/cyl)
    
    Figures below won't work with BIOS for partitions not in cyl 1
    parameters to be used for BIOS calculations are:
    cylinders=77622 heads=16 sectors/track=63 (1008 blks/cyl)
    
    Media sector size is 512
    Warning: BIOS sector numbering starts with sector 1
    Information from DOS bootblock is:
    The data for partition 1 is:
    sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
        start 63, size 57721041 (28184 Meg), flag 80 (active)
    	beg: cyl 0/ head 1/ sector 1;
    	end: cyl 1023/ head 15/ sector 63
    The data for partition 2 is:
    <UNUSED>
    The data for partition 3 is:
    <UNUSED>
    The data for partition 4 is:
    sysid 5 (0x05),(Extended DOS)
        start 57721545, size 20515005 (10017 Meg), flag 0
    	beg: cyl 1023/ head 255/ sector 63;
    	end: cyl 1023/ head 9/ sector 63

    Code:
    #mount -t ext2fs /dev/ad0s5 /media/disk
    #ls /media/disk
    lost+found
    #


    But there is supposed to be a complete OS on the partition. If i do from Linux:
    Code:
    # fdisk -l
    ...
    /dev/hda5
    /dev/hda6

    Code:
    #mount /dev/hda5 /media/disk
    # ls /media/disk
    root etc usr home etc var and_so_on


    Thanks, there are some data stored that i need.
     
  2. chuckbuck

    chuckbuck New Member

    Messages:
    2
    Thanks Received:
    0
    If it's an ext3 partition, why are you mounting it with the "ext2fs" flag?
     
  3. Bunyan

    Bunyan Member

    Messages:
    143
    Thanks Received:
    15
    Disable the journal on the Linux partitions.
    FreeBSD is able to see only EXT2FS/REISERFS/XFS !
     
  4. phoenix

    phoenix Moderator Staff Member Moderator

    Messages:
    3,450
    Thanks Received:
    769
    FreeBSD doesn't support ext3, only ext2. And ext3 filesystems can be mounted as ext2, as ext3 is the same as ext2 but with an added journal.
     
  5. Anonymous

    Anonymous Guest

    Mhh... i did it the way i did ( -t ext2fs) cause the web told me to.
    I guess phoenix answer explains why.

    It did work before, then i crashed BSD and had to re-install it. Before that i used gparted to resize the partitions (i added space of the ext3-partition to the free space to get more space for BSD. The ext3 just contains a backup of Debian).
    Might be i messed it up with gparted and therefor it doesn't work no more.

    I used a stick, copied the data (/usr/local/opt/e17 if i recall correct) on the stick, booted into FreeBSD, mounted the stick and was able to copy the .../opt/e17 back in place.

    I still would like to know why i get the above "problem", but the real problem is solved by my workaround.

    Thanks for the answers.