salamo alikom
hald runing up 80% and some times to 100% ,i ma using FreeBSD 8 stable with compiled kernel .
var/log/message does not show any thing .
here is my kernel config :
rc.conf :
hald runing up 80% and some times to 100% ,i ma using FreeBSD 8 stable with compiled kernel .
var/log/message does not show any thing .
Code:
last pid: 1159; load averages: 1.25, 1.35, 1.88 up 0+00:45:54 13:53:35
89 processes: 4 running, 85 sleeping
CPU: 47.1% user, 0.0% nice, 49.3% system, 3.6% interrupt, 0.0% idle
Mem: 155M Active, 61M Inact, 182M Wired, 248K Cache, 108M Buf, 566M Free
Swap: 1000M Total, 1000M Free
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
745 haldaemon 1 113 0 7728K 4216K RUN 40:09 80.86% hald
865 SIFE 3 45 0 67432K 42308K ucond 0:27 12.45% nautilus
836 SIFE 1 46 0 69016K 57076K RUN 0:15 3.56% Xorg
884 SIFE 1 45 0 38776K 17756K select 0:03 1.66% wnck-applet
858 SIFE 1 44 0 6728K 2864K getblk 0:01 0.49% gam_server
864 SIFE 1 44 0 41844K 20080K select 0:07 0.00% gnome-panel
862 SIFE 1 44 0 23484K 13392K select 0:03 0.00% metacity
923 SIFE 2 66 0 40400K 19872K piperd 0:03 0.00% gnome-terminal
851 SIFE 2 54 0 103M 15204K piperd 0:02 0.00% gnome-settings-daem
901 SIFE 1 44 0 41108K 18672K select 0:01 0.00% mixer_applet2
880 SIFE 1 44 0 23092K 12144K select 0:01 0.00% gnome-screensaver
903 SIFE 1 44 0 40504K 18912K select 0:01 0.00% clock-applet
611 root 1 44 0 3708K 964K select 0:01 0.00% moused
770 root 1 44 0 4064K 1520K select 0:01 0.00% hald-addon-storage
847 SIFE 1 44 0 9160K 5032K select 0:01 0.00% gconfd-2
899 SIFE 1 44 0 29360K 13200K select 0:00 0.00% notification-area-a
907 root 1 76 0 14068K 11076K select 0:00 0.00% perl5.8.9
871 SIFE 1 44 0 98M 14948K select 0:00 0.00% gnome-volume-contro
Code:
cpu I686_CPU
ident STABLE
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
device cpufreq
device acpi
device pci
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# output. Adds ~128k to driver.
# output. Adds ~215k to driver.
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
device uart # Generic UART driver
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
device miibus # MII bus support
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device firmware # firmware assist module
device bpf # Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device uhid # "Human Interface Devices"
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device firewire # FireWire bus code
device fwe # Ethernet over FireWire (non-standard!)
device fwip # IP over FireWire (RFC 2734,3146)
device dcons # Dumb console driver
device dcons_crom # Configuration ROM for dcons
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options ALTQ_NOPCC
options KVA_PAGES=512
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_PPPOE
options NETGRAPH_SOCKET
Code:
hostname="localhost"
ifconfig_sis0="DHCP"
keymap="us.iso"
moused_enable="YES"
dbus_enable="YES"
hald_enable="YES"
linux_enable="YES"
fusefs_enable="YES"
zfs_enable="YES"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
pflog_enable="YES"
pflog_flags=""
pflog_logfile="/var/log/pf/pflog"