c92b When I run "change screensaver properties " the X crash ! - The FreeBSD Forums
The FreeBSD Forums  

Go Back   The FreeBSD Forums > Desktop Usage > X.Org

X.Org X.Org on FreeBSD installation & configuration.

Reply
 
Thread Tools Display Modes
  #1  
Old December 7th, 2008, 03:58
jackie jackie is offline
Junior Member
 
Join Date: Nov 2008
Location: China Weifang
Posts: 24
Thanks: 1
Thanked 0 Times in 0 Posts
Default When I run "change screensaver properties " the X crash !

FreeBSD www.boolome.cn 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Fri Dec 5 09:33:04 CST 2008 root@www.boolome.cn:/usr/obj/usr/src/sys/boolome i386


Code:

Code:
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/local/share/X11/rgb"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/lib/X11/fonts/misc/"
        FontPath     "/usr/local/lib/X11/fonts/TTF/"
        FontPath     "/usr/local/lib/X11/fonts/OTF"
        FontPath     "/usr/local/lib/X11/fonts/Type1/"
        FontPath     "/usr/local/lib/X11/fonts/TrueType/"
        FontPath     "/usr/local/lib/X11/fonts/100dpi/"
        FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "extmod"
        Load  "record"
        Load  "dbe"
        Load  "glx"
        Load  "GLcore"
        Load  "xtrap"
#       Load  "dri"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        Modeline     "1440x900"  106.47  1440 1520 1672 1904  900 901 904 932
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        VendorName  "Intel Corporation"
        BoardName   "82945G/GZ Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection
Reply With Quote
  #2  
Old December 7th, 2008, 04:07
jackie jackie is offline
Junior Member
 
Join Date: Nov 2008
Location: China Weifang
Posts: 24
Thanks: 1
Thanked 0 Times in 0 Posts
Default

part of xorg.0.log
Code:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.0-CURRENT i386 
Current Operating System: FreeBSD www.boolome.cn 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Fri Dec  5 09:33:04 CST 2008     root@www.boolome.cn:/usr/obj/usr/src/sys/boolome i386
(II) intel(0): Kernel reported 491520 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 1966080 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): Write-combining range (0xfdf00000,0x80000) was already clear
(==) intel(0): Write-combining range (0xfdf80000,0x40000) was already clear
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xfdf00000,0x80000) was already clear
(==) intel(0): Write-combining range (0xfdf80000,0x40000) was already clear
(==) intel(0): Write-combining range (0xd0000000,0x10000000) was already set
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 35389440 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 10 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 11 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x000000007f820000 physical
)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB, 0x000000007f832000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (11520 kB) X tiled
(II) intel(0): 0x02000000-0x041bffff: exa offscreen (34560 kB)
(II) intel(0): 0x10000000:            end of aperture
(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
(WW) intel(0): PRB0_HEAD (0x46c13f78) and PRB0_TAIL (0x000156e8) indicate ring buffer not flushed
(WW) intel(0): Existing errors found in hardware state.
Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x7ffc0001 getbl_err: 0x00000000
ipeir: 0x00000000 iphdr: 0x6db3ffff
LP ring tail: 0x000156f0 head: 0x00013f78 len: 0x0001f001 start 0x00000000
eir: 0x0000 esr: 0x0000 emr: 0xffff
instdone: 0xffc1 instpm: 0x0000
memmode: 0x00000306 instps: 0x800f00d0
hwstam: 0xeffe ier: 0x0042 imr: 0x0000 iir: 0x1020
Ring at virtual 0x28800000 head 0x13f78 tail 0x156f0 count 1502
Ring at virtual 0x28800000 head 0x13f78 tail 0x156f0 count 1502
Ring end
space: 125056 wanted 131064

Fatal server error:
lockup

Error in I830WaitLpRing(), timeout for 2 seconds
pgetbl_ctl: 0x7ffc0001 getbl_err: 0x00000000
ipeir: 0x00000000 iphdr: 0x6db3ffff
LP ring tail: 0x000156f8 head: 0x00013f78 len: 0x0001f001 start 0x00000000
eir: 0x0000 esr: 0x0000 emr: 0xffff
instdone: 0xffc1 instpm: 0x0000
memmode: 0x00000306 instps: 0x800f00d0
hwstam: 0xeffe ier: 0x0042 imr: 0x0000 iir: 0x1020
Ring at virtual 0x28800000 head 0x13f78 tail 0x156f8 count 1504
Ring at virtual 0x28800000 head 0x13f78 tail 0x156f8 count 1504


Ring end
space: 125048 wanted 131064

FatalError re-entered, aborting
lockup
Reply With Quote
  #3  
Old December 7th, 2008, 13:38
adamk adamk is offline
Senior Member
 
Join Date: Nov 2008
Posts: 1,605
Thanks: 6
Thanked 262 Times in 243 Posts
Default

I would report this on the freebsd-x11 mailig list, or even open up a pr about this. Anytime the X server crashes, there is a bug in the server or the driver.
Reply With Quote
  #4  
Old December 8th, 2008, 02:02
jackie jackie is offline
Junior Member
 
Join Date: Nov 2008
Location: China Weifang
Posts: 24
Thanks: 1
Thanked 0 Times in 0 Posts
Default

OK,I have known from the maillist

I am using very old CURRENT. That version of CURRENT is known to have broken
DRM/DRI on some intel cards.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to select "primary" video card (not related to sli or crossfire)... edhunter System Hardware 8 January 26th, 2010 07:06
"Invalid address" Running apps via WINE tbyte Installation and Maintenance of FreeBSD Ports or Packages 12 December 14th, 2008 21:27
"free" command/perl script for freebsd unixdude General 10 November 20th, 2008 10:57
Creating Audio CD "image" files wiscodisco Multimedia 4 November 19th, 2008 17:39


All times are GMT +1. The time now is 19:14.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
The mark FreeBSD is a registered trademark of The FreeBSD Foundation and is used by The FreeBSD Project with the permission of The FreeBSD Foundation.
Web protection and acceleration provided by CloudFlare
0