Hi,
I recently upgraded from FreeBSD 7.4 to 9.0-RELEASE.
Generally everything's working, but I am having trouble mounting my digital camera over USB.
I know USB got overhauled in 8.0, so maybe there's just a new way of doing things that I don't know about...
I have an external HDD which shows up as da0 with no problems, so I know some kinds of USB work.
When I plug in the camera, dmesg gives:
Note: there is no 'da*' information in the output, as there is in the handbook's section on USB. I also see no /dev/da* other than my already-connected external HDD.
However, the device does show up in usbconfig:
Note the last line, there.
The device does NOT show up in `camcontrol devlist`.
Am I missing something?
Shouldn't my device be showing up as da1, as it used to when I was on 7.4?
Any help appreciated,
John
I recently upgraded from FreeBSD 7.4 to 9.0-RELEASE.
Generally everything's working, but I am having trouble mounting my digital camera over USB.
I know USB got overhauled in 8.0, so maybe there's just a new way of doing things that I don't know about...
I have an external HDD which shows up as da0 with no problems, so I know some kinds of USB work.
When I plug in the camera, dmesg gives:
Code:
ugen3.2: <Sony> at usbus3
umass1: <Sony Sony DSC, class 0/0, rev 2.00/5.00, addr 2> on usbus3
umass1: RBC over CBI; quirks = 0x1000
umass1:9:1:-1: Attached to scbus9
Note: there is no 'da*' information in the output, as there is in the handbook's section on USB. I also see no /dev/da* other than my already-connected external HDD.
Code:
# ls /dev/da*
/dev/da0 /dev/da0s1 /dev/da0s1b /dev/da0s1d
However, the device does show up in usbconfig:
Code:
# usbconfig list
ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen2.1: <OHCI root HUB nVidia> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <EHCI root HUB nVidia> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen1.2: <My Book Western Digital> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen3.2: <Sony DSC Sony> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
Note the last line, there.
The device does NOT show up in `camcontrol devlist`.
Am I missing something?
Shouldn't my device be showing up as da1, as it used to when I was on 7.4?
Any help appreciated,
John
Code:
# uname -a
FreeBSD lumpy.fake_fake.net 9.0-RELEASE-p4 FreeBSD 9.0-RELEASE-p4 #1: Fri Nov 9 21:46:56 PST 2012 root@lumpy.fake_fake.net:/usr/obj/usr/src/sys/GENERIC amd64