15ae8 [Solved] nvidia MSI geForce 5600 dual head - can't configure - The FreeBSD Forums
The FreeBSD Forums  

Go Back   The FreeBSD Forums > Desktop Usage > X.Org
Reload this Page [Solved] nvidia MSI geForce 5600 dual head - can't configure
Register FAQ Calendar Search Today's Posts Mark Forums Read

X.Org X.Org on FreeBSD installation & configuration.

Reply
 
Thread Tools Display Modes
  #1  
Old June 3rd, 2010, 03:46
pippo pippo is offline
Junior Member
  
Join Date: Apr 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default nvidia MSI geForce 5600 dual head - can't configure
This may be complicated... can't find anything on gargle or forums that could cure the issue.
Using from ports, nvidia-driver-173, which seems to the recommended one. The card has both vga and dvi outputs. I am using an LG Flatron W2361v flat panel for the primary monitor at 1920 x 1080 and an Hitachi SuperScan Elite 812(CRT) at 1600x 1200 (or something like that). I tried using LG on DVI and the Hitachi on d-sub (VGA) and that didn't swing too well. I can use the LG alone and connect to both DVI and d-Sub and switch between, using just the one monitor.
Using 2 monitors is no problem on Winders. To try for compatibility and avoid conflicts (?) I use a VGA to DVI adapter for the Hitachi and branch the LG to the d-sub.
I do believe that it should be possible to set up the system to work on a virtual screen covering the two screens, but I have only been able to have the two screens run only without Xorg.
The driver is nvidia (not nv); xrandr(version 1.3??) only picks up one monitor, the primary LG.
I'm wondering if this is a problem of incompatibility of monitors (led & crt) or should I try one of the other drivers, the 71 or the 195? I've even tried the nvidia-xconfig, the nvidia-settings and all the other options for positioning the screens, the double head options, etc. etc. etc. I get the feeling that MSI has not bothered with the unix end of their drivers or else there is something I am missing. Why is xrandr not picking up the second monitor? Or should I try the LG on DVI and the Hitachi on d-Sub?
I could post my xorg.conf files but since xrandr does not sense the 2nd monitor (screen) and neither does nvidia-settings, I don't see the point. And nvidia-xconfig doesn't even find the config file. Of course, maybe the nvidia-settings and nvidia-sconfig can't deal with the nvidia-driver 173 since they are version 195something.
Thanks for any insights.
Reply With Quote
  #2  
Old June 3rd, 2010, 07:48
SirDice's Avatar
SirDice SirDice is offline
Moderator
  
Join Date: Nov 2008
Location: Rotterdam, Netherlands
Posts: 13,725
Thanks: 47
Thanked 2,023 Times in 1,862 Posts
Default
Yes, please do post your xorg.conf. And the last /var/log/Xorg.0.log. The last will contain any errors, the first we need to see if you configured things correctly.
__________________
Senior UNIX Engineer at Unix Support Nederland
Experience is something you don't get until just after you need it.
Reply With Quote
  #3  
Old June 3rd, 2010, 21:26
pippo pippo is offline
Junior Member
  
Join Date: Apr 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default
xorg.conf: The latest of many variations...

Code:
Section "ServerLayout"
	Identifier     "Dual Screen"
	Screen         "Screen0" 0 0
	Screen	       "Screen1" RightOf "Screen0"	
	Option	"AllowEmptyInput" "off"
#	Option "DontZap" "off"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
#	Option	"XkbModel" "pc105"
	Option  "XkbModel"  "hp2511"
	Option  "XkbLayout" "us,ca(multi)"
	Option  "XkbRules"  "xorg"
	Option  "XkbOptions" "grp:alt_shift_toggle"
	Option  "CustomKeycodes" "on"
EndSection

Section "Monitor"
	#DisplaySize	  360   270	# mm
	Identifier   "Monitor0"
	VendorName   "GSM"
	ModelName    "W2361"
 ### Comment all HorizSync and VertRefresh values to use DDC:
	HorizSync    30.0 - 83.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier  "Monitor1"
	Option	    "RightOf" "left"
	VendorName  "HTC"
	ModelName   "CM812U"
	HorizSync   31.0 - 107.0
	VertRefresh 50.0 - 160.0
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        Option     "FlatPanel" "True"         	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        Option     "FPScale"   "True"         	# [<bool>]
        #Option     "FPTweak"   "True"         	# <i>
        Option     "DualHead"           	# [<bool>]
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV31 [GeForce FX 5600]"
	Option	    "Monitor-VGA_1/analog" "Monitor0"
	Option      "Monitor-VGA_2/analog" "Monitor1"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	Option	   "TwinView"
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes	"1920x1080"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device	   "Card0"
	Monitor	   "Monitor1"
    SubSection "Display"
	    Depth  24
	    Modes  "1600x1200" "1024x768" "800x600"
    EndSubSection
EndSection
Reply With Quote
  #4  
Old June 3rd, 2010, 21:32
pippo pippo is offline
Junior Member
  
Join Date: Apr 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Xorg.0.log:

Code:
X.Org X Server 1.7.5
Current version of pixman: 0.16.6
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun  2 21:53:04 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Dual Screen"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Card0"
(**) Option "AllowEmptyInput" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "Keyboard0"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the first keyboard device.
(II) Loader magic: 0x81def20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0:1:0:0) 10de:0312:1462:9123 nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, BIOS @ 0x????????/65536
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  173.14.25  Wed Jan 27 09:44:30 PST 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.5.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) NVIDIA dlloader X Driver  173.14.25  Wed Jan 27 09:27:55 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/local/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView"
(**) NVIDIA(0): Enabling RENDER acceleration
(WW) NVIDIA(0): No TwinView "MetaModes" specified; will fall back to Display
(WW) NVIDIA(0):     SubSection modes.
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5600 (NV31) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.31.20.26.02
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5600 at PCI:1:0:0:
(--) NVIDIA(0):     LG W2361 (CRT-0)
(--) NVIDIA(0):     Hitachi CM812 (CRT-1)
(--) NVIDIA(0): LG W2361 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Hitachi CM812 (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1920x1080"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
(--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "1920x1080"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "FlatPanel" is not used
(WW) NVIDIA(0): Option "FPScale" is not used
(WW) NVIDIA(0): Option "DualHead" is not used
(WW) NVIDIA(0): Option "Monitor-VGA_1/analog" is not used
(WW) NVIDIA(0): Option "Monitor-VGA_2/analog" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/sysmouse"
(--) <default pointer>: Device: "/dev/sysmouse"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) acceleration profile 0
(II) <default pointer>: SetupAuto: hw.iftype is 4, hw.model is 0
(II) <default pointer>: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "hp2511"
(**) Keyboard0: XkbModel: "hp2511"
(**) Option "XkbLayout" "us,ca(multi)"
(**) Keyboard0: XkbLayout: "us,ca(multi)"
(**) Option "XkbOptions" "grp:alt_shift_toggle"
(**) Keyboard0: XkbOptions: "grp:alt_shift_toggle"
(**) Option "CustomKeycodes" "on"
(**) Keyboard0: CustomKeycodes enabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
Last edited by DutchDaemon; June 3rd, 2010 at 23:13. Reason: tagfix
Reply With Quote
  #5  
Old June 3rd, 2010, 21:37
crsd crsd is offline
Member
  
Join Date: Nov 2008
Location: Russia, Krasnodar
Posts: 420
Thanks: 8
Thanked 92 Times in 82 Posts
Default
Use standard xorg.conf, generated with # Xorg -configure, with
Code:
option "TwinView"
added to Device section (and, possibly, MetaModes). That's how it works for me. Check /usr/local/share/doc/NVIDIA....../README, as well.
Reply With Quote
  #6  
Old June 3rd, 2010, 22:20
pippo pippo is offline
Junior Member
  
Join Date: Apr 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I have tried Xorg -configure so many times I get ssick of hearing about it. It has never, ever worked for me just to get a basic startup of Xorg and that's with and without hal... inevitably it has been a patch check operation every time... and I am amazed that even then I get it to work. I have to go back and forth between Xorg.0.log, xorg.conf and many suggestions in the forums and the xorg manual that it becomes hilarious.
I appreciate the suggestion and will try, but my hopes are not too high, especially since I have just been hit by the ultimate stupidity in FreeBSD - the ridiculous lack of communication skills that that make port updating just about enough to want to drop unix and start appreciating Winders - al least, there, you expect to waste a lot of frustrating time in dealing with moronic stupidity.
Reply With Quote
  #7  
Old June 4th, 2010, 07:56
SirDice's Avatar
SirDice SirDice is offline
Moderator
  
Join Date: Nov 2008
Location: Rotterdam, Netherlands
Posts: 13,725
Thanks: 47
Thanked 2,023 Times in 1,862 Posts
Default
Here's mine:
Code:
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
EndSection

Section "Files"
    FontPath        "/usr/local/lib/X11/fonts/misc/:unscaled"
    FontPath        "/usr/local/lib/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/local/lib/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/local/lib/X11/fonts/misc/"
    FontPath        "/usr/local/lib/X11/fonts/Type1/"
    FontPath        "/usr/local/lib/X11/fonts/100dpi/"
    FontPath        "/usr/local/lib/X11/fonts/75dpi/"
    FontPath        "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath        "/usr/local/lib/X11/fonts/TTF/"
    FontPath        "/usr/local/lib/X11/fonts/OTF/"
    FontPath        "/usr/local/lib/X11/fonts/bitstream-vera"
    FontPath        "/usr/local/lib/X11/fonts/webfonts/"
    FontPath        "/usr/local/share/ghostscript/fonts/"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "MSI"
    BoardName      "NX7600GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    #Option        "DisableGLXRootClipping" "True"
    #Option        "AllowGLXWithComposite" "True"
    Option         "TwinView"
    Option         "MetaModes" "1600x1200,1600x1200;1280x1024,1280x1024;1024x768,1024x768;800x600,800x600"
    #Option        "TwinViewXineramaInfoOrder" "DFP,CRT"
    #Option         "ConnectedMonitor" "DFP"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600"
    EndSubSection
EndSection
__________________
Senior UNIX Engineer at Unix Support Nederland
Experience is something you don't get until just after you need it.
Reply With Quote
  #8  
Old June 4th, 2010, 08:32
carlton_draught's Avatar
carlton_draught carlton_draught is offline
Member
  
Join Date: Mar 2010
Posts: 288
Thanks: 158
Thanked 27 Times in 20 Posts
Default
I used nvidia-settings to get mine to work.

Why not just download the lastest driver from nvidia and install it? It's not hard, from what I remember - that's what I had to do. I'm not sure how new your card is, but the later drivers are generally better. How old is that card btw? You might have to use their vintage driver to get it to run. I wouldn't give up until I have installed the driver that is appropriate to your card, from nvidia's site.

And BTW as far as I know, MSI have nothing to do with providing any drivers for the cards - it's all Nvidia's doing.

Good luck.
Last edited by carlton_draught; June 4th, 2010 at 08:41.
Reply With Quote
  #9  
Old June 4th, 2010, 20:39
pippo pippo is offline
Junior Member
  
Join Date: Apr 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default Solved
First, my card was made by MSI... so nv & the usual nvidia stuff does not agree with it, it would seem. But the nvidia-driver-173 from ports does work.

The only solution to this messy and ridiculously muddled configuration source at xorg was a hit and miss method of trying and modifying xorg.conf, checking the Xorg.0.log, changing xorg.conf and trying to decipher the confusing and really unclear instructions that stumble over themselves (e.g. use option in screen or in device sections), and so on and on. Oh, yes and then there are all the googled configurations that come from god-knows-where and are put in equally incomprehensible sections.
Of course, for me anyway, none of the automatic configurations schemes have ever worked, not even partially.
Why are the programmers trying to simplify things for us by treating us as complete idiots. Anyway, enough *beep**beep**beep**beep**beep*ing.
The final analysis is to try to decipher the xorg manual and to tune the conf file manually.
Here's my final xorg.conf (undoubtedly it is somewhat bloated, but I'm not going to waste more time to streamline it).
Hope it helps somebody:
Code:
 Section "ServerLayout"
	Identifier     "Dual Screen"
#	Screen         "Screen0" 0 0
	#Screen	       "Screen1" 1980 0 
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
	Option	"AllowEmptyInput" "off"
#	Option "DontZap" "off"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
#	Option	"XkbModel" "pc105"
	Option  "XkbModel"  "hp2511"
	Option  "XkbLayout" "us,ca(multi)"
	Option  "XkbRules"  "xorg"
	Option  "XkbOptions" "grp:alt_shift_toggle"
	Option  "CustomKeycodes" "on"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver	"mouse"
	Option	"Protocol" "auto"
	Option	"Device" "/dev/sysmouse"
	Option	"ZAxisMapping" "4 5 6 7" 
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "GSM"
	ModelName    "W2361"
 ### Comment all HorizSync and VertRefresh values to use DDC:
	HorizSync    30.0 - 83.0
	VertRefresh  56.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier  "Monitor1"
	Option	    "RightOf" "Monitor0"
	VendorName  "HTC"
	ModelName   "CM812U"
	HorizSync   31.0 - 107.0
	VertRefresh 50.0 - 160.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	Option	    "TwinView" "True"
	Option	    "DynamicTwinView" "True"
	Option	    "TwinViewOrientation" "CRT-0 RightOf DFP-0"
	Option	    "ConnectedMonitor" "DFP, CRT"
	Option	    "UseDisplayDevice" "DFP-0, CRT-0"
	Option	    "MetaModes" "1920x1080 +0+0, 1600x1200 +1920+0"
	VendorName  "nVidia Corporation"
	BoardName   "NV31 [GeForce FX 5600]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	Option	   "TwinView" "True"
	Option	   "AddARGBGLXVisuals" "True"
	SubSection "Display"
	#	Virtual 3520 1080
		Viewport   0 0
		Depth     24
		Modes	"1920x1080"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device	   "Card0"
	Monitor	   "Monitor1"
	Option	   "TwinView" "True"
	Option    "AddARGBGLXVisuals" "True"
    SubSection "Display"
	    Depth  24
	    Modes  "1600x1200" "1024x768"
    EndSubSection
EndSection
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Solved] No display on Inspiron 8200 / NVidia GeForce 2 Go jmusgrove X.Org 3 September 27th, 2009 13:09
Dual head GeForce card DarkNuker System Hardware 12 September 2nd, 2009 12:45
Problem configuring dual-head with older NVidia card ceo X.Org 4 August 5th, 2009 12:45
Is Nvidia GeForce 8400 GS supported ? bsd_newbie System Hardware 10 February 21st, 2009 10:10
GeForce FX 5200 dual monitor problem kegf X.Org 2 January 26th, 2009 08:17


All times are GMT +1. The time now is 08:26.

Contact Us - FreeBSD - Archive - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
The mark FreeBSD is a registered trademark of The FreeBSD Foundation and is used by The FreeBSD Project with the permission of The FreeBSD Foundation.
Web protection and acceleration provided by CloudFlare
0