[Solved] Dell D600 Wireless associated but still not working

moman61 · #1 March 17th, 2010, 11:02

This states that wlan0 is up! but you can see that its not issuing an ip address for wireless 2100

Code:

dmesg -a

CPU: Intel(R) Pentium(R) M processor 1600MHz (599.49-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e1f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 2147483648 (2048 MB)
avail memory = 2090807296 (1993 MB)
kbd1 at kbdmux0
acpi0: <DELL CPi R  > on motherboard
acpi0: [ITHREAD]
acpi0: reservation of 0, 9fc00 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe8000000-0xefffffff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0000
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0000
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0000
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link1: BIOS IRQ 11 for 2.3.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x1002> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:0b:db:05:04:8f
bge0: [ITHREAD]
cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [FILTER]
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xfafef000-0xfafeffff irq 9 at device 3.0 on pci2
ipw0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounter "TSC" frequency 599493665 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad0: 152627MB <WDC WD1600BEVE-11WZT0 01.01A01> at ata0-master UDMA100
pccard1: <unknown card> (manufacturer=0xffff, product=0x0001, function_type=-1) at function 0
pccard1:    CIS info: O2Micro, SmartCardBus Reader, V1.0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
acd0: DVDR <PHILIPS SPD8005L1/H5S2> at ata1-master UDMA33
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x413c> at usbus3
uhub4: <vendor 0x413c product 0x0058, class 9/0, rev 2.00/10.00, addr 2> on usbus3
Root mount waiting for: usbus3
uhub4: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
Setting hostuuid: 44454c4c-3700-1034-8043-b3c04f563231.
Setting hostid: 0x6cd261c2.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 168152 free (3216 frags, 20617 blocks, 1.3% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 253797 free (53 frags, 31718 blocks, 0.0% fragmentation)
/dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 69223282 free (34514 frags, 8648596 blocks, 0.0% fragmentation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 1475070 free (902 frags, 184271 blocks, 0.1% fragmentation)
Mounting local file systems:
.
Setting hostname: home
.
wlan0: Ethernet address: 00:04:23:4c:21:
Starting wpa_supplicant.
Starting Network: lo0 bge0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:0b:db:05:04:8f
        media: Ethernet autoselect (none)
        status: no carrier
Starting devd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local
/lib/evolution/2.28 /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/samba4
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:
.
Configuring syscons:
 blanktime
.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Wed Mar 17 01:31:33 PDT 2010
wlan0: link state changed to UP
ipw0: need multicast update callback

,

I am not getting an IP address for the wireless card?

Code:

ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:0b:db:05:04:
        inet 192.168.1.7 netmask 0xffffff00 broadcast 192.168.1.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
ipw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:04:23:4c:21:
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
        status: associated
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:04:23:4c:21:
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        media: IEEE 802.11 Wireless Ethernet DS/2Mbps mode 11b
        status: associated
        ssid JMP channel 8 (2447 Mhz 11b) bssid 00:18:01:f7:66:
        country US authmode OPEN privacy ON deftxkey 2 wepkey 2:40-bit
        txpower 0 bmiss 7 scanvalid 60 roaming MANUAL

richardpl · #2 March 17th, 2010, 11:18

How do you do set wep password. Best and fast is via nwkey, read ifconfig(8) for more details.

moman61 · #3 March 17th, 2010, 21:16

what would I have to do to see if the nwkey option will work?

Code:

/etc/rc.conf
.home"
ifconfig_bge0="DHCP"
sshd_enable="YES"
wlans_ipw0="wlan0"
ifconfig_wlan0="WPA DHCP"
ifconfig_wlan0="ssid *** nwkey key1:********** DHCP"
hald_enable="YES"
dbus_enable="YES"
oss_enable="YES"
moused_nondefault_enable="NO"
moused_enable="NO"

Code:

/boot/loader.conf

if_ipw_load="YES"
wlan_wep_load="YES"
wlan_ccmp_load="YES"
wlan_tkip_load="YES"
sem_load="YES"
legal.intel_ipw.license_ack=1

,

Code:

/etc/wpa_supplicant.conf

network={
ssid="***"
key_mgmt=NONE
wep_key1=*********
wep_tx_keyidx=1
}

richardpl · #4 March 18th, 2010, 11:01

I'm not going to do your homework. You never make us of weptxkey, so you will not transmit anything useful to AP.

But wpa_supplicant conf could work.

moman61 · #5 March 20th, 2010, 06:36

I finally was able to get my wireless on both laptops working in FBSD8! I found out that the ipw0 does not work on this edition of FBSD so I used a belkin card and configured it for ral0 on my Dell D600 and I used the ath0 configuration for my HP NC8000. You were right I didn't need you to do my homework for me! research and persistance has paid off.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I got wireless working, but I get strange error messages at boot!	Allamgir	Networking	11	December 4th, 2011 06:43
[Solved] Freebsd 7.1 P11 i386 XOrg Dell Latitude C810 Dlink DWL AG660 wireless interrupt storm	xorgfrustrated	Mobile Computing	2	March 17th, 2010 13:33
Dell D600 Wireless not working	moman61	Mobile Computing	5	March 13th, 2010 06:33
BCM4309 not working in Dell Inspiron 6000	Bhavesh	Mobile Computing	1	February 22nd, 2010 08:17
Horribly confused; how do i get wireless working?	curses	Networking	1	November 21st, 2009 01:28