2c902 MS wireless optical desktop 2000 problem - The FreeBSD Forums
The FreeBSD Forums  

Go Back   The FreeBSD Forums > Base System > Peripheral Hardware
Reload this Page MS wireless optical desktop 2000 problem
Register FAQ Calendar Search Today's Posts Mark Forums Read

Peripheral Hardware Stuff that plugs in via USB, FireWire, eSATA, PS/2, etc.

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old December 21st, 2008, 12:26
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default MS wireless optical desktop 2000 problem
hi...

forgive me if this problem has already been solved by someone b4.
i try to google for the solution but with no success..

i install freebsd 7.1 in my desktop today and got problem with mouse (MS wireless optical mouse 2000)

im using the MS wireless optical desktop 2000.
the keybord just work out of the box..but the mouse didnt work.

if anyone has exprience this prob and had solved this prob..please help me..

tq
Reply With Quote
  #2  
Old December 21st, 2008, 13:19
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
show output of dmesg
Is your mouse ps2 or usb?
Reply With Quote
  #3  
Old December 21st, 2008, 13:27
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
show output of dmesg
Is your mouse ps2 or usb?
my mouse is wireless using usb port.

the model is:
Microsoft Wireless Optical Desktop 2000

i will post the dmesg later..not at my home right now
Reply With Quote
  #4  
Old December 21st, 2008, 13:35
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
Quote:
Originally Posted by azzura- View Post
my mouse is wireless using usb port.

the model is:
Microsoft Wireless Optical Desktop 2000
uh, i'm dumb ass.
...waiting for dmesg
Reply With Quote
  #5  
Old December 22nd, 2008, 09:07
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
dmesg
Quote:
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Razer Razer 1600dpi 3 button optical mouse, class 0/0, rev 2.00/23.10, addr 2> on uhub0
ums0: 7 buttons and Z dir.
ukbd0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp CDDVDW SH-S202J/SB01> at ata0-master UDMA66
ad5: 238475MB <MAXTOR STM3250310AS 3.AAC> at ata2-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad5s1a
rl0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 1 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC1 #0: Sun Dec 7 05:57:33 UTC 2008
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1795.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SS SE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147221504 (2047 MB)
avail memory = 2091585536 (1994 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfeae0000-0xfeaeffff at device 0.1 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9fbc00-0xfe9fbfff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:18:37:07:5d:3e
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
Reply With Quote
  #6  
Old December 22nd, 2008, 09:09
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
continue...

Quote:
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Razer Razer 1600dpi 3 button optical mouse, class 0/0, rev 2.00/23.10, addr 2> on uhub0
ums0: 7 buttons and Z dir.
ukbd0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp CDDVDW SH-S202J/SB01> at ata0-master UDMA66
ad5: 238475MB <MAXTOR STM3250310AS 3.AAC> at ata2-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad5s1a
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
umass0: <SanDisk U3 Titanium, class 0/0, rev 2.00/2.00, addr 2> on uhub4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk U3 Titanium 7.01> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C)
cd0 at umass-sim0 bus 0 target 0 lun 1
cd0: <SanDisk U3 Titanium 7.01> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider cd0 is iso9660/U3 System.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Wa
iStyinncgi n(gm adxi sk6s0, svencoodnedss )r efmoari nsiynsgt.e.m. p5r ocess `syncer' to stop...5 5 3 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC1 #0: Sun Dec 7 05:57:33 UTC 2008
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1795.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SS SE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147221504 (2047 MB)
avail memory = 2091585536 (1994 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfeae0000-0xfeaeffff at device 0.1 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9fbc00-0xfe9fbfff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:18:37:07:5d:3e
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Razer Razer 1600dpi 3 button optical mouse, class 0/0, rev 2.00/23.10, addr 2> on uhub0
ums0: 7 buttons and Z dir.
ukbd0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp CDDVDW SH-S202J/SB01> at ata0-master UDMA66
ad5: 238475MB <MAXTOR STM3250310AS 3.AAC> at ata2-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad5s1a
rl0: link state changed to UP
umass0: <SanDisk U3 Titanium, class 0/0, rev 2.00/2.00, addr 2> on uhub4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk U3 Titanium 7.01> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C)
cd0 at umass-sim0 bus 0 target 0 lun 1
cd0: <SanDisk U3 Titanium 7.01> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Reply With Quote
  #7  
Old December 22nd, 2008, 09:10
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
GEOM_LABEL: Label for provider cd0 is iso9660/U3 System.
pid 960 (gnome-terminal), uid 1001: exited on signal 11 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 5 1 4 3 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC1 #0: Sun Dec 7 05:57:33 UTC 2008
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1795.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH, DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SS SE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147221504 (2047 MB)
avail memory = 2091585536 (1994 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfeae0000-0xfeaeffff at device 0.1 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9fbc00-0xfe9fbfff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:18:37:07:5d:3e
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Razer Razer 1600dpi 3 button optical mouse, class 0/0, rev 2.00/23.10, addr 2> on uhub0
ums0: 7 buttons and Z dir.
ukbd0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
kbd2 at ukbd0
uhid0: <Microsoft Microsoft Wireless Optical Desktop\M-. 2.10, class 0/0, rev 2.00/0.41, addr 2> on uhub1
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorp CDDVDW SH-S202J/SB01> at ata0-master UDMA66
ad5: 238475MB <MAXTOR STM3250310AS 3.AAC> at ata2-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad5s1a
rl0: link state changed to UP
pid 43475 (conftest), uid 0: exited on signal 12 (core dumped)
umass0: <SanDisk U3 Titanium, class 0/0, rev 2.00/2.00, addr 2> on uhub4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk U3 Titanium 7.01> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C)
cd0 at umass-sim0 bus 0 target 0 lun 1
cd0: <SanDisk U3 Titanium 7.01> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider cd0 is iso9660/U3 System.
wow..never have dmesg this long b4..tis is my first time installing freebsd on desktop..before this i only use in my laptop.
Reply With Quote
  #8  
Old December 22nd, 2008, 17:20
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
ok, now show me /etc/X11/xorg.conf

also have you tried X -configure?

P.S. ye, this is longest dmesg i have seen either.
Last edited by graudeejs; December 22nd, 2008 at 17:28.
Reply With Quote
  #9  
Old December 23rd, 2008, 08:57
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
ok, now show me /etc/X11/xorg.conf

also have you tried X -configure?

P.S. ye, this is longest dmesg i have seen either.

X- configure
&&
cp /root/xorg.conf.net /etc/X11/xorg.conf

still not working

Quote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/local/share/X11/rgb"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
#DisplaySize 410 260 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL SE198WFP"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Reply With Quote
  #10  
Old December 23rd, 2008, 12:59
sT4k3's Avatar
sT4k3 sT4k3 is offline
Junior Member
  
Join Date: Nov 2008
Location: Russia, Perm
Posts: 21
Thanks: 0
Thanked 2 Times in 2 Posts
Default
Mouse don't work only X or console mode too ?
Reply With Quote
  #11  
Old December 23rd, 2008, 13:03
sT4k3's Avatar
sT4k3 sT4k3 is offline
Junior Member
  
Join Date: Nov 2008
Location: Russia, Perm
Posts: 21
Thanks: 0
Thanked 2 Times in 2 Posts
Default
also show your /etc/rc.conf
Reply With Quote
  #12  
Old December 23rd, 2008, 13:53
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by sT4k3 View Post
Mouse don't work only X or console mode too ?
didnt work in both
Reply With Quote
  #13  
Old December 23rd, 2008, 13:54
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by sT4k3 View Post
also show your /etc/rc.conf
cat /etc/rc.conf

Quote:
# -- sysinstall generated deltas -- # Sun Dec 21 18:15:58 2008
# Created: Sun Dec 21 18:15:58 2008
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
keymap="us.iso"
linux_enable="YES"
moused_enable="NO"
# -- sysinstall generated deltas -- # Tue Dec 23 15:49:42 2008
ifconfig_rl0="inet xxx.xxx.xxx.xxx netmask "xxx.xxx.xxx.xxx"
defaultrouter="xxx.xxx.xxx.xxx"
Reply With Quote
  #14  
Old December 23rd, 2008, 14:22
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
remove moused_enable="NO" from /etc/rc.conf
Reply With Quote
  #15  
Old December 23rd, 2008, 14:25
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
if you are using custom kernel make sure you have:
device ums
Reply With Quote
  #16  
Old December 23rd, 2008, 15:03
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
if you are using custom kernel make sure you have:
device ums
i still using general kernel..
Reply With Quote
  #17  
Old December 23rd, 2008, 15:08
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
did you try removing moused_enable="NO" from /etc/rc.conf
Reply With Quote
  #18  
Old December 23rd, 2008, 15:11
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
did you try removing moused_enable="NO" from /etc/rc.conf
already try it and restart x..
but still no luck..
Reply With Quote
  #19  
Old December 23rd, 2008, 15:14
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
ye, but you need to start moused daemon
type as root
/etc/rc.d/moused start

or restart pc, without that line, i told you to remove
Reply With Quote
  #20  
Old December 23rd, 2008, 15:20
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
ye, but you need to start moused daemon
type as root
/etc/rc.d/moused start

or restart pc, without that line, i told you to remove
i try to restart my pc also..but still not working..
i guess i have to use my wired mouse for the time being.ermm..

my wireless keyboard and mouse are use with debian and ubuntu before and it work out of the box..

it is possible to copy the setting from debian or ubuntu xorg.conf and paste it in my freebsd xorg.conf?

tq
Reply With Quote
  #21  
Old December 23rd, 2008, 15:26
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
Quote:
Originally Posted by azzura- View Post
i try to restart my pc also..but still not working..
i guess i have to use my wired mouse for the time being.ermm..

my wireless keyboard and mouse are use with debian and ubuntu before and it work out of the box..

it is possible to copy the setting from debian or ubuntu xorg.conf and paste it in my freebsd xorg.conf?

tq
it shouldn't cause problems
Reply With Quote
  #22  
Old December 23rd, 2008, 15:43
azzura- azzura- is offline
Junior Member
  
Join Date: Dec 2008
Posts: 26
Thanks: 5
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
it shouldn't cause problems
thanks..
i will try it later..need to install debian/ubuntu on my other pc first..

thanks guys for helping me
Reply With Quote
  #23  
Old December 23rd, 2008, 17:37
sT4k3's Avatar
sT4k3 sT4k3 is offline
Junior Member
  
Join Date: Nov 2008
Location: Russia, Perm
Posts: 21
Thanks: 0
Thanked 2 Times in 2 Posts
Default
add to /etc/rc.conf
Quote:
usbd_enable="YES"
moused_enable="YES"
and restart your pc...
Last edited by sT4k3; December 23rd, 2008 at 18:34.
Reply With Quote
  #24  
Old December 23rd, 2008, 18:28
graudeejs's Avatar
graudeejs graudeejs is offline
Style(9) Addict
  
Join Date: Nov 2008
Location: Riga, Latvia
Posts: 4,530
Thanks: 424
Thanked 612 Times in 479 Posts
Default
a misspelling:
moused_enable="YES"

Reply With Quote
  #25  
Old December 23rd, 2008, 18:34
sT4k3's Avatar
sT4k3 sT4k3 is offline
Junior Member
  
Join Date: Nov 2008
Location: Russia, Perm
Posts: 21
Thanks: 0
Thanked 2 Times in 2 Posts
Default
Quote:
Originally Posted by killasmurf86 View Post
a misspelling:
moused_enable="YES"

10x killasmurf86
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
xfce desktop in livecd? smartly GNOME 1 December 18th, 2008 10:24
FreeBSD on Desktop - flash darkshadow Multimedia 16 December 8th, 2008 23:48
wireless AP and WPA-PSK bluetick Networking 9 December 5th, 2008 18:11
Sound Card - Optical Out Fozzy System Hardware 4 November 19th, 2008 15:33
Desktop Usage Forum Hierarchy ken Feedback 2 November 17th, 2008 07:02


All times are GMT +1. The time now is 04:33.

Contact Us - FreeBSD - Archive - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
The mark FreeBSD is a registered trademark of The FreeBSD Foundation and is used by The FreeBSD Project with the permission of The FreeBSD Foundation.
Web protection and acceleration provided by CloudFlare
0