[Solved] installing Gnome2 from ports failed

[mahashakti89]

Hi,

I installed FreeBSD 8.0-rc2 , there was no problem at all, then I tried to install gnome 2 from ports. So make install clean works till ... I get following error with libxml2-2.7.6 : Error Code 1

I googled for some answers , but it does'nt work. I tried to remove libxml2 from /usr/ports/distfiles/gnome2 in order to fetch it again, I tried to install the involved packages libxml2 py26-libxml2 with sysinstall, but nothing. Any detailled help would be appreciated.

Thanks

mahashakti89

[DutchDaemon]

We'll need more than 'error code 1', which is meaningless.

Was your ports tree completely up-to-date (i.e. installed and updated with portsnap)? Don't mix packages from a CD with ports. Won't work (at all, or for long).

[mahashakti89]

Originally Posted by DutchDaemon

We'll need more than 'error code 1', which is meaningless.

Was your ports tree completely up-to-date (i.e. installed and updated with portsnap)? Don't mix packages from a CD with ports. Won't work (at all, or for long).

Iam aware that error code 1 is not enough ... but thi is all I have on screen , the same message for libxml2 gnome-applets and gucharmap , the ports tree is up-to-date , was installed with portnsap.

Thanks

mahashakti

[mahashakti89]

Hi, folks,

Finally I used a pipe to get more detailled messages about what is wrong :

===>  Building for py26-libxml2-2.7.6
Making all in .
gmake[1]: Entering directory `/usr/ports/textproc/py-libxml2/work/libxml2-2.7.6/python'
/usr/local/bin/python2.6 ./generator.py .
/bin/sh ../libtool --tag=CC   --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/python2.6 -I../include -I../include -I../python  
-I/usr/local/include -I/usr/local/include  -O2 -pipe -fno-strict-aliasing -pedantic -W -Wformat -Wunused -Wimplicit -Wreturn-type -Wswitch 
-Wcomment -Wtrigraphs -Wformat -Wchar-subscripts -Wuninitialized -Wparentheses -Wshadow -Wpointer-arith -Wcast-align -Wwrite-strings 
-Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Winline -Wredundant-decls -MT types.lo -MD -MP -MF 
.deps/types.Tpo -c -o types.lo types.c
libtool: compile:  cc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include/python2.6 -I../include -I../include -I../python -I/usr/local/include -I/usr
/local/include -O2 -pipe -fno-strict-aliasing -pedantic -W -Wformat -Wunused -Wimplicit -Wreturn-type -Wswitch -Wcomment -Wtrigraphs -Wformat 
-Wchar-subscripts -Wuninitialized -Wparentheses -Wshadow -Wpointer-arith -Wcast-align -Wwrite-strings -Waggregate-return -Wstrict-prototypes 
-Wmissing-prototypes -Wnested-externs -Winline -Wredundant-decls -MT types.lo -MD -MP -MF .deps/types.Tpo -c types.c  -fPIC -DPIC -o 
.libs/types.o
Found 1605 functions in libxml2-api.xml
Found 55 functions in libxml2-python-api.xml
Generated 886 wrapper functions, 558 failed, 216 skipped

Missing type converters: 
xmlRelaxNGValidityErrorFunc *:2  xmlXPathObjectPtr:22  const htmlEntityDesc *:2  xmlOutputMatchCallback:1  xmlElementContentPtr *:1  
xmlStructuredErrorFunc:5  xmlSchematronValidCtxtPtr:3  xmlParserInputBufferCreateFilenameFunc:2  xmlSchemaValType:2  size_t:1  
xmlEnumerationPtr:5  xmlSchemaWildcardPtr:1  xmlXIncludeCtxtPtr:4  xmlRelaxNGValidityErrorFunc:2  xmlSAXHandler *:4  ...:1  
xmlShellReadlineFunc:1  xmlDict *:1  xmlAutomataPtr:19  unsigned long:1  xmlParserInputPtr:17  xmlCatalogAllow:2  xmlExpNodePtr:3  
xmlElementContent *:1  xmlCharEncodingOutputFunc:1  xmlDictPtr:10  xmlTextWriterPtr:77  const htmlElemDesc *:1  xmlChRangeGroup *:1  
xmlIDPtr:1  xmlSchemaValPtr:13  xmlInputMatchCallback:1  xmlElementTablePtr:2  xmlChar **:16  xmlXPathCompExprPtr:6  xmlTextReaderErrorFunc:1  
xmlExternalEntityLoader:2  xmlNotationTablePtr:2  xmlXPathVariableLookupFunc:1  xmlParserNodeInfoPtr:1  xmlExpCtxtPtr:14  xmlPatternPtr:8  
xmlC14NIsVisibleCallback:1  xmlDeregisterNodeFunc:2  va_list:1  xmlSchemaTypePtr:9  htmlStatus:1  xmlRegisterNodeFunc:2  xmlAttributeType:2  
xmlRefPtr:1  xmlCharEncodingHandler *:4  xmlNotationPtr:3  xmlSaveCtxtPtr:8  xmlRegExecCallbacks:1  xmlNsPtr *:1  xmlLocationSetPtr:6  
xmlSchemaSAXPlugPtr:1  xmlModulePtr:4  xmlEnumerationPtr *:2  xmlShellCtxtPtr:10  xlinkNodeDetectFunc:2  xmlRefTablePtr:1  xmlStreamCtxtPtr:6  
xmlSchemaValidityErrorFunc *:2  xmlAttributeTablePtr:2  xmlSchematronParserCtxtPtr:5  xmlCatalogPrefer:1  xmlParserNodeInfoSeqPtr:3  
xmlSchematronPtr:2  xmlNodePtr *:2  xmlInputReadCallback:7  char **:5  xmlCharEncoding:13  xmlRegExecCtxtPtr:5  xmlElementContentType:2  void 
*:87  xmlTextReaderErrorFunc *:1  xmlSAXHandlerPtr *:1  xmlEntityReferenceFunc:1  xmlDocPtr *:1  xmlBufferAllocationScheme:3  
xmlSchemaValidityErrorFunc:2  xmlDOMWrapCtxtPtr:6  xmlOutputWriteCallback:2  xmlSchemaFacetPtr:7  xlinkHandlerPtr:2  xmlXPathFuncLookupFunc:1  
htmlElemDesc *:3  xmlCharEncodingHandlerPtr:7  xmlCharEncodingInputFunc:1  xmlFeature:1  const xmlParserNodeInfo *:1  xmlNodeSetPtr:32  
xmlEntitiesTablePtr:3  xmlIDTablePtr:1  xmlXPathFunction:4  xmlOutputBufferCreateFilenameFunc:2  xmlElementContentPtr:8  xmlElementTypeVal:1  
xlinkType:1  xmlGenericErrorFunc *:1 
touch gen_prog
gmake[1]: Leaving directory `/usr/ports/textproc/py-libxml2/work/libxml2-2.7.6/python'
*** Error code 1

Stop in /usr/ports/textproc/py-libxml2.
*** Error code 1

Stop in /usr/ports/textproc/gnome-doc-utils.
*** Error code 1

Stop in /usr/ports/sysutils/gnome-settings-daemon.
*** Error code 1

Stop in /usr/ports/x11/gnome-applets.
*** Error code 1

Stop in /usr/ports/x11/gnome-applets.
*** Error code 1

Stop in /usr/ports/x11/gnome2.
*** Error code 1

Stop in /usr/ports/x11/gnome2.

Perhaps it's now better for getting help

Thanks

mahashakti89

[SirDice]

What version of python is installed?

[mahashakti89]

Originally Posted by SirDice

What version of python is installed?

Here is the answer :

checking whether /usr/local/bin/python2.6 version >= 2.0... yes
checking for /usr/local/bin/python2.6 version... 2.6

is that what you need ?

Thanks

mahashakti

[SirDice]

Try a # pkg_version -v | grep python

[mahashakti89]

Originally Posted by SirDice

Try a # pkg_version -v | grep python

O.K. last message , I am going to sleep, but you have it :

Output from command is : python26-2.6.2_3 = up-to-date with port

Good night !

mahashakti89

[mahashakti89]

So, problem is now solved .... I modified some line in the makefile and it works.

Thanks

mahashakti89

[DutchDaemon]

Mind sharing that solution? This is a forum, not the helpdesk.

[vitek16]

Originally Posted by mahashakti89

So, problem is now solved .... I modified some line in the makefile and it works.

What is is concrete you have made in Makefile?