29cc6 Finished: CALL FOR TESTERS Intel wireless 5100/5300 iwn(4) driver for FreeBSD - The FreeBSD Forums
The FreeBSD Forums  

Go Back   The FreeBSD Forums > Development > FreeBSD Development
Reload this Page Finished: CALL FOR TESTERS Intel wireless 5100/5300 iwn(4) driver for FreeBSD
Register FAQ Calendar Search Today's Posts Mark Forums Read

FreeBSD Development Kernel development, writing drivers, coding, and questions regarding FreeBSD internals.

Reply
Page 1 of 14 1 2311 Last »
 
Thread Tools Display Modes
  #1  
Old October 29th, 2009, 20:01
delphij@'s Avatar
delphij@ delphij@ is offline
FreeBSD Developer
  
Join Date: Oct 2007
Location: Mountain View, CA
Posts: 3
Thanks: 0
Thanked 4 Times in 1 Post
Default Finished: CALL FOR TESTERS Intel wireless 5100/5300 iwn(4) driver for FreeBSD
Hi guys,

Bernhard Schmidt has a patchset that updates our iwn(4) driver to support 5100/5300 wireless adapters. It also updated some firmware included in our distribution. Please test if you own these hardware and report back about how it worked, thanks for your cooperation!

http://techwires.net/~bschmidt/patch...81028.diff.bz2

To apply it, go to your /usr/src/sys and do # bzcat iwn_merge_20081028.diff.bz2 | patch -p0 and recompile/install kernel.

(We would appreciate if you would cc rpaulo@FreeBSD.org and/or freebsd-net@FreeBSD.org but I'll try to forward whatever appeared here

Thanks in advance!
__________________
FreeBSD -- The Power to Serve!
Last edited by DutchDaemon; October 29th, 2009 at 22:00.
Reply With Quote
The Following 4 Users Say Thank You to delphij@ For This Useful Post:
alie (December 17th, 2009), chalbersma (November 15th, 2009), oliverh (November 2nd, 2009), TzunTzai (November 2nd, 2009)
  #2  
Old November 2nd, 2009, 16:02
MellowCat MellowCat is offline
Junior Member
  
Join Date: Sep 2009
Posts: 8
Thanks: 1
Thanked 0 Times in 0 Posts
Default
Was there any specific testing you were looking for?
Reply With Quote
  #3  
Old November 2nd, 2009, 22:07
delphij@'s Avatar
delphij@ delphij@ is offline
FreeBSD Developer
  
Join Date: Oct 2007
Location: Mountain View, CA
Posts: 3
Thanks: 0
Thanked 4 Times in 1 Post
Default
Whether it works for your hardware/break existing compatibility
__________________
FreeBSD -- The Power to Serve!
Reply With Quote
  #4  
Old November 3rd, 2009, 11:47
thuglife's Avatar
thuglife thuglife is offline
Member
  
Join Date: Jul 2009
Location: Athens, Greece
Posts: 159
Thanks: 4
Thanked 40 Times in 25 Posts
Default
I have 5300 on a lenovo T500, i will test it this afternoon and report back. Thank you for this!
Reply With Quote
  #5  
Old November 3rd, 2009, 16:10
MellowCat MellowCat is offline
Junior Member
  
Join Date: Sep 2009
Posts: 8
Thanks: 1
Thanked 0 Times in 0 Posts
Default
Berndt's patch worked first time 'out of the box' for me, haven't tried all the wifi features though.

Lenovo Thinkpad T500, Intel 5100 AGN wireless card, 8.0-RC1 and RC2 (amd64).
Reply With Quote
  #6  
Old November 3rd, 2009, 17:46
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Hi,

I'd really appreciate any kind of feedback

There is a newer version available with some additional bug fixes and yet another bunch of imports from OpenBSD.
Checkout:
Code:
svn co http://svn.techwires.net/svn/projects/freebsd/
View:
http://svn.techwires.net/viewvc/view...jects/freebsd/

There is one open issue reported by Mykola Dzham regarding suspend/resume I haven't been able to track down and there's still the LOR thing which is not yet fixed completely. It just happens on boot not while loading module manually later (races?)
Reply With Quote
The Following User Says Thank You to bschmidt For This Useful Post:
hugme (January 29th, 2010)
  #7  
Old November 4th, 2009, 01:04
oliverh's Avatar
oliverh oliverh is offline
Member
  
Join Date: Nov 2008
Location: 127.0.0.1
Posts: 557
Thanks: 51
Thanked 36 Times in 33 Posts
Default
So actually I'm able to use e.g. WPA2? Is it possible to use 11n?
__________________
What was the goal of the Linux community--to replace Windows? One can imagine higher aspirations., Bill Joy
Reply With Quote
  #8  
Old November 4th, 2009, 08:17
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Not yet. I do not have access to a 11n capable accesspoint.
Reply With Quote
  #9  
Old November 4th, 2009, 08:32
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
And yes, WPA does work.
Reply With Quote
  #10  
Old November 4th, 2009, 09:36
vermaden's Avatar
vermaden vermaden is offline
Giant Locked
  
Join Date: Nov 2008
Location: pl_PL.lodz
Posts: 2,192
Thanks: 59
Thanked 633 Times in 349 Posts
Default
@bschmidt

You are thinkig about WPA or WPA2?
__________________
Religions, worst damnation of mankind.
"FreeBSD has always been the operating system that GNU/Linux should have been." Frank Pohlmann, IBM
http://vermaden.blogspot.com
Reply With Quote
  #11  
Old November 4th, 2009, 12:18
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
both
Reply With Quote
  #12  
Old November 4th, 2009, 14:25
TzunTzai's Avatar
TzunTzai TzunTzai is offline
Junior Member
  
Join Date: Apr 2009
Posts: 51
Thanks: 5
Thanked 2 Times in 2 Posts
Default
ummm, is this link ....

http://svn.techwires.net/viewvc/view...jects/freebsd/

more current than this link?

http://techwires.net/~bschmidt/patch...81028.diff.bz2
__________________
Toshiba Satellite M305-S4910 / FreeBSD 8.0-RCx/ VirtualBox 3.x (WinXP)
Reply With Quote
  #13  
Old November 4th, 2009, 14:46
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
yes it is. Revsion 1 is iwn_merge_20081028.diff.bz2
Reply With Quote
  #14  
Old November 4th, 2009, 19:44
oliverh's Avatar
oliverh oliverh is offline
Member
  
Join Date: Nov 2008
Location: 127.0.0.1
Posts: 557
Thanks: 51
Thanked 36 Times in 33 Posts
Default
Ah, I see. Thanks for the clarification.
__________________
What was the goal of the Linux community--to replace Windows? One can imagine higher aspirations., Bill Joy
Reply With Quote
  #15  
Old November 5th, 2009, 01:12
TzunTzai's Avatar
TzunTzai TzunTzai is offline
Junior Member
  
Join Date: Apr 2009
Posts: 51
Thanks: 5
Thanked 2 Times in 2 Posts
Default
I'm sorry. I'm new to patching. Whats the next step here?


Code:
0# bzcat /storage/DOWNLOADS/iwn_merge_20081028.diff.bz2 | patch -p0
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Index: conf/files
|===================================================================
|--- conf/files	(revision 198553)
|+++ conf/files	(working copy)
--------------------------
Patching file conf/files using Plan A...
Hunk #1 failed at 1082.
Hunk #2 failed at 1107.
Hunk #3 failed at 1121.
Hunk #4 failed at 1138.
4 out of 4 hunks failed--saving rejects to conf/files.rej
Hmm...  The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Index: modules/iwnfw/iwn5000/Makefile
|===================================================================
|--- modules/iwnfw/iwn5000/Makefile	(revision 198553)
|+++ modules/iwnfw/iwn5000/Makefile	(working copy)
--------------------------
File to patch: 
No file found--skip this patch? [n] n
File to patch:
__________________
Toshiba Satellite M305-S4910 / FreeBSD 8.0-RCx/ VirtualBox 3.x (WinXP)
Reply With Quote
  #16  
Old November 5th, 2009, 08:21
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Probably easier if you use the svn checkout.

Code:
svn co http://svn.techwires.net/svn/projects/freebsd
cd freebsd/sys/modules/iwnfw
make
make install
cd ../iwn
env CFLAGS=-I$PWD/../../ make
make install
Reply With Quote
The Following 2 Users Say Thank You to bschmidt For This Useful Post:
abefar (December 27th, 2009), henker (April 14th, 2010)
  #17  
Old November 8th, 2009, 00:34
thuglife's Avatar
thuglife thuglife is offline
Member
  
Join Date: Jul 2009
Location: Athens, Greece
Posts: 159
Thanks: 4
Thanked 40 Times in 25 Posts
Default
Hey there!

Well, the driver works for me. It is stable for general - light use but when i try to cvsup the base system the link dies, if i try to bring the interface back up i get the following:

Code:
Nov  8 01:04:12 optimus kernel: wlan0: link state changed to DOWN
Nov  8 01:04:12 optimus dhclient[1636]: exiting.
Nov  8 01:04:33 optimus kernel: ifa_add_loopback_route: insertion failed
Nov  8 01:04:35 optimus kernel: iwn0: iwn5000_post_alive: crystal calibration failed, error 35
Nov  8 01:04:35 optimus kernel: iwn0: iwn_init_locked: could not initialize hardware, error 35
Code:
Failed to initiate AP scan.
ioctl[SIOCS80211, op 103, len 128]: Device not configured
This is me.

Code:
FreeBSD optimus.cybertron.local 8.0-RC2 FreeBSD 8.0-RC2 #2: Sat Nov  7 03:55:14 EET 2009     root@optimus.cybertron.local:/usr/obj/usr/src/sys/GENERIC  amd64
Code:
optimus# cat /etc/rc.conf
wlans_iwn0="wlan0"
ifconfig_em0="DHCP"
ifconfig_wlan0="WPA DHCP"
hostname="optimus.cybertron.local"
Code:
optimus# cat /etc/make.conf
CPUTYPE         =core2
WITH_GECKO      =libxul
If there is anything i can do to help you debug this issue please let me know. Thank you for your work.
Reply With Quote
  #18  
Old November 8th, 2009, 11:51
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Can you reproduce the issue with
Code:
wlandebug 0xffffffff
set?

I'm curious about why the device goes down, you're not getting a device timeout message, so it must be somewhere in net80211.
Reply With Quote
  #19  
Old November 8th, 2009, 15:17
thuglife's Avatar
thuglife thuglife is offline
Member
  
Join Date: Jul 2009
Location: Athens, Greece
Posts: 159
Thanks: 4
Thanked 40 Times in 25 Posts
Default
This is the most interesting section from the log, i used:
Code:
sysctl net.wlan.0.debug=0xffffffff
Code:
Nov  8 15:38:25 optimus kernel: wlan0: [00:05:59:0c:47:60] discard duplicate frame, seqno <1365,1365> fragno <0,0> tid 16
Nov  8 15:38:25 optimus kernel: wlan0: [00:05:59:0c:47:60] discard duplicate frame, seqno <1389,1389> fragno <0,0> tid 16
Nov  8 15:38:25 optimus kernel: wlan0: [00:05:59:0c:47:60] discard duplicate frame, seqno <1399,1399> fragno <0,0> tid 16
Nov  8 15:38:25 optimus kernel: wlan0: received beacon from 00:05:59:0c:47:60 rssi 65
Nov  8 15:38:26 optimus kernel: wlan0: received beacon from 00:05:59:0c:47:60 rssi 66
Nov  8 15:38:26 optimus kernel: wlan0: received beacon from 00:05:59:0c:47:60 rssi 66
Nov  8 15:38:26 optimus wpa_supplicant[387]: Failed to disable WPA in the driver.
Nov  8 15:38:26 optimus kernel: wlan0: stop running, 1 vaps running
Nov  8 15:38:26 optimus kernel: wlan0: ieee80211_new_state_locked: RUN -> INIT (nrunning 0 nscanning 0)
Nov  8 15:38:26 optimus kernel: wlan0: down parent iwn0
Nov  8 15:38:26 optimus kernel: wlan0: ieee80211_newstate_cb: RUN -> INIT arg -1
Nov  8 15:38:26 optimus kernel: wlan0: sta_newstate: RUN -> INIT (-1)
Nov  8 15:38:26 optimus kernel: wlan0: ieee80211_ref_node (ieee80211_send_mgmt:1876) 0xffffff8000841000<00:05:59:0c:47:60> refcnt 276
Nov  8 15:38:26 optimus kernel: wlan0: [00:05:59:0c:47:60] send station disassociate (reason 8)
Nov  8 15:38:26 optimus kernel: [00:05:59:0c:47:60] send disassoc on channel 11
Nov  8 15:38:26 optimus kernel: wlan0: _ieee80211_crypto_delkey: AES-CCM keyix 0 flags 0x133 rsc 50479 tsc 37776 len 16
Nov  8 15:38:26 optimus kernel: wlan0: [00:05:59:0c:47:60] bss node leave
Nov  8 15:38:26 optimus kernel: wlan0: node_reclaim: remove 0xffffff8000841000<00:05:59:0c:47
Nov  8 15:38:26 optimus kernel: :<5>w6l0a> nf0r:o ml isntka tsitoatne  tcahbalneg,e dr etfoc ntD 27O5WN
Nov  8 15:38:26 optimus kernel: 
Nov  8 15:38:26 optimus kernel: wlan0: ieee80211_alloc_node 0xffffff8000865000<00:21:6a:6e:3d:b6> in station table
Nov  8 15:38:26 optimus kernel: wlan0: [00:21:6a:6e:3d:b6] ieee80211_alloc_node: inact_reload 2
Nov  8 15:38:26 optimus kernel: wlan0: ieee80211_scan_flush
Nov  8 15:38:26 optimus kernel: wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0 len 0
Nov  8 15:38:26 optimus last message repeated 2 times
Nov  8 15:38:26 optimus kernel: wlan0: _ieee80211_crypto_delkey: TKIP keyix 3 flags 0x1f6 rsc 1393 tsc 1 len 16
Nov  8 15:38:26 optimus dhclient[1051]: connection closed
Nov  8 15:38:26 optimus dhclient[1051]: exiting.
Nov  8 15:38:30 optimus kernel: wlan0: start running, 0 vaps running
Nov  8 15:38:30 optimus kernel: wlan0: ieee80211_start_locked: up parent iwn0
Nov  8 15:38:30 optimus kernel: wlan0: start running, 1 vaps running
Nov  8 15:38:30 optimus kernel: wlan0: ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
Nov  8 15:38:30 optimus kernel: wlan0: ieee80211_newstate_cb: INIT -> SCAN arg 0
Nov  8 15:38:30 optimus kernel: wlan0: sta_newstate: INIT -> SCAN (0)
Nov  8 15:38:30 optimus kernel: wlan0: ieee80211_check_scan: active scan, append
Nov  8 15:38:30 optimus kernel: wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0 maxdwell 0, desired mode auto, append
Nov  8 15:38:30 optimus kernel: wlan0: scan set 1g, 6g, 11g, 7g, 13g, 52a, 56a, 60a, 64a, 36a, 40a, 44a, 48a, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g, 149a, 153a, 157a, 161a, 165a, 100a, 104a, 108a, 112a, 116a, 120a, 124a, 128a, 132a, 136a, 140a dwell min 20ms max 200ms
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan  11g ->   1g [active, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:14:7f:32:c5:c3 rssi 29
Nov  8 15:38:30 optimus kernel: wlan0: [00:14:7f:32:c5:c3] discard unhandled information element, id 47, len 1
Nov  8 15:38:30 optimus kernel: [00:14:7f:32:c5:c3] new probe_resp on chan 1 (bss chan 1) "NIKITAS-FILIPPOS" rssi 29
Nov  8 15:38:30 optimus kernel: [00:14:7f:32:c5:c3] caps 0x411 bintval 100 erp 0x104
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan   1g ->   6g [active, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: received beacon from 00:13:33:81:bf:ad rssi 5
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] new beacon on chan 6 (bss chan 6) "Zeus" rssi 5
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] caps 0x411 bintval 100 erp 0x104
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:13:33:81:bf:ad rssi 6
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] new probe_resp on chan 6 (bss chan 6) "Zeus" rssi 6
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] caps 0x411 bintval 100 erp 0x104
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:13:33:81:bf:ad rssi 7
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] new probe_resp on chan 6 (bss chan 6) "Zeus" rssi 7
Nov  8 15:38:30 optimus kernel: [00:13:33:81:bf:ad] caps 0x411 bintval 100 erp 0x104
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan   6g ->  11g [active, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:05:59:0c:47:60 rssi 67
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] new probe_resp on chan 11 (bss chan 11) "Liaskos2" rssi 67
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] caps 0x431 bintval 100 erp 0x100
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:05:59:0c:47:60 rssi 68
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] new probe_resp on chan 11 (bss chan 11) "Liaskos2" rssi 68
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] caps 0x431 bintval 100 erp 0x100
Nov  8 15:38:30 optimus kernel: wlan0: received probe_resp from 00:1c:df:08:72:9b rssi 14
Nov  8 15:38:30 optimus kernel: wlan0: [00:1c:df:08:72:9b] discard unhandled information element, id 47, len 1
Nov  8 15:38:30 optimus kernel: wlan0: [00:1c:df:08:72:9b] discard probe_resp frame, for off-channel 10
Nov  8 15:38:30 optimus kernel: wlan0: received beacon from 00:05:59:0c:47:60 rssi 68
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] new beacon on chan 11 (bss chan 11) "Liaskos2" rssi 68
Nov  8 15:38:30 optimus kernel: [00:05:59:0c:47:60] caps 0x431 bintval 100 erp 0x100
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan  11g ->   7g [active, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan   7g ->  13g [passive, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: received beacon from 00:1c:a2:ac:3e:21 rssi 21
Nov  8 15:38:30 optimus kernel: [00:1c:a2:ac:3e:21] new beacon on chan 13 (bss chan 13) "WIRELESS" rssi 21
Nov  8 15:38:30 optimus kernel: [00:1c:a2:ac:3e:21] caps 0x471 bintval 100 erp 0x103
Nov  8 15:38:30 optimus kernel: wlan0: ieee80211_add_scan: chan  13g min dwell met (1785560 > 1785487)
Nov  8 15:38:30 optimus kernel: wlan0: scan_task: chan  13g ->  52a [passive, dwell min 20ms max 200ms]
Nov  8 15:38:30 optimus kernel: wlan0: received beacon from 00:1c:a2:ac:3e:21 rssi 21
Nov  8 15:38:30 optimus kernel: wlan0: [00:1c:a2:ac:3e:21] discard beacon frame, for off-channel 13
Nov  8 15:38:31 optimus kernel: wlan0: received beacon from 00:1c:a2:ac:3e:21 rssi 21
Nov  8 15:38:31 optimus kernel: wlan0: [00:1c:a2:ac:3e:21] discard beacon frame, for off-channel 13
Nov  8 15:38:31 optimus kernel: wlan0: received beacon from 00:1c:a2:ac:3e:21 rssi 21
Nov  8 15:38:31 optimus kernel: wlan0: [00:1c:a2:ac:3e:21] discard beacon frame, for off-channel 13
Nov  8 15:38:31 optimus kernel: wlan0: received beacon from 00:1c:a2:ac:3e:21 rssi 20
Nov  8 15:38:31 optimus kernel: wlan0: [00:1c:a2:ac:3e:21] discard beacon frame, for off-channel 13
Nov  8 15:38:31 optimus kernel: iwn0: iwn_config: could not configure bluetooth coexistence, error 35
Nov  8 15:38:31 optimus kernel: wlan0: ieee80211_cancel_scan: cancel active scan
Nov  8 15:38:31 optimus kernel: wlan0: scan_task: done, [ticks 1786601, dwell min 20 scanend 2149268980]
Nov  8 15:38:31 optimus kernel: wlan0: [00:05:59:0c:47:60] discard frame, not to bss
Nov  8 15:38:31 optimus kernel: wlan0: [00:05:59:0c:47:60] discard frame, not to bss
Nov  8 15:38:31 optimus kernel: wlan0: [00:24:b2:36:61:c8] discard frame, not to bss
Nov  8 15:38:32 optimus kernel: wlan0: [00:1c:a2:ac:3e:21] discard frame, not to bss
Reply With Quote
  #20  
Old November 8th, 2009, 16:15
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Hmm, seems like wpa_supplicant is telling the device to stop. Can you run wpa_supplicant with debug output?

Code:
wpa_supplicant -Dbsd -iwlan0 -c/etc/wpa_supplicant.conf -ddt
I have have the feeling that something with re-keying is not working correctly.
Reply With Quote
  #21  
Old November 9th, 2009, 15:05
Zhwazi Zhwazi is offline
Junior Member
  
Join Date: Nov 2009
Posts: 30
Thanks: 0
Thanked 0 Times in 0 Posts
Default
I have a Dell Latitude E6400 with a Wifilink 5300 which I bought separately, followed the svn instructions on 8.0-RC1 i386, works fine for me so far in an hour of use.

Tried cvsup like ThugLife says gave him problems, didn't see any problems when I tried it.

Thank you very much for the driver, this was the last thing in my system that wasn't working as I expected it to
Reply With Quote
  #22  
Old November 9th, 2009, 15:36
Zephyrus's Avatar
Zephyrus Zephyrus is offline
Junior Member
  
Join Date: Nov 2008
Location: Italy
Posts: 15
Thanks: 1
Thanked 0 Times in 0 Posts
Default
Hi,
well, first of all thanks for the driver, this was the last major device who was totally not supported by FreeBSD on my HP Probook.

With regard to the driver itself, I've tested it today for about three hours to connect to an hidden ssid-open network with browser based authentication.
In particular I performed a full-speed download test for about thirty minutes, I tested csup and then I spent the rest of the time with a standard network usage (http,imap,ssh, etc...).

These are the most relevant messages I found in the log files:
Code:
Nov  8 12:38:40 polaris kernel: iwn0: iwn_config: could not set TX power
Nov  8 12:38:41 polaris kernel: iwn0: iwn_config: could not configure valid TX chains, error 35
Nov  9 12:46:23 polaris kernel: iwn0: <Intel(R) PRO/Wireless 5100> mem 0x98200000-0x98201fff irq 17 at device 0.0 on pci3
Nov  9 12:46:23 polaris kernel: iwn0: MIMO 1T2R, MoW, address 00:22:fa:e4:2e:56
Nov  9 12:46:23 polaris kernel: iwn0: [ITHREAD]
Nov  9 12:46:23 polaris kernel: iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Nov  9 12:46:23 polaris kernel: iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Nov  9 12:46:23 polaris kernel: iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Nov  9 12:46:23 polaris kernel: iwn0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
Nov  9 12:46:23 polaris kernel: iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
Nov  9 12:59:12 polaris kernel: iwn0: need multicast update callback
Nov  9 12:59:14 polaris kernel: iwn0: need multicast update callback
Nov  9 12:59:14 polaris kernel: iwn0: need multicast update callback
Nov  9 13:05:40 polaris kernel: iwn0: need multicast update callback
Nov  9 13:06:22 polaris kernel: iwn0: need multicast update callback
Nov  9 13:06:22 polaris kernel: iwn0: need multicast update callback
Nov  9 13:06:22 polaris kernel: iwn0: need multicast update callback
Nov  9 14:11:59 polaris kernel: iwn0: need multicast update callback
Nov  9 14:12:07 polaris kernel: iwn0: need multicast update callback
The first two lines seem to appear only on the first load of if_iwn. Apart from these messages, all seems to have worked well. If you need more information or some particular test, I will gladly help, if I can.
Last edited by Zephyrus; November 9th, 2009 at 15:41.
Reply With Quote
  #23  
Old November 9th, 2009, 16:03
bschmidt bschmidt is offline
Member
  
Join Date: Oct 2009
Location: Schwandorf, Germany
Posts: 298
Thanks: 0
Thanked 39 Times in 28 Posts
Default
Quote:
Originally Posted by Zephyrus View Post
These are the most relevant messages I found in the log files:
Code:
Nov  8 12:38:40 polaris kernel: iwn0: iwn_config: could not set TX power
Nov  8 12:38:41 polaris kernel: iwn0: iwn_config: could not configure valid TX chains, error 35
The first two lines seem to appear only on the first load of if_iwn. Apart from these messages, all seems to have worked well. If you need more information or some particular test, I will gladly help, if I can.
What do you mean by "first load"? Does that mean you have to load if_iwn.ko twice to get a working device?
Reply With Quote
  #24  
Old November 9th, 2009, 18:47
Zephyrus's Avatar
Zephyrus Zephyrus is offline
Junior Member
  
Join Date: Nov 2008
Location: Italy
Posts: 15
Thanks: 1
Thanked 0 Times in 0 Posts
Default
Wait, it seems that I cannot reproduce it anymore. And I also noticed that those lines were included by mystake, since they refer to yesterday. I will let you know if I come across that error again.
Just to be clear, the driver works on first load, at boot.
I also forgot to give my system information:
Code:
FreeBSD polaris 8.0-RC2 FreeBSD 8.0-RC2 #2: Fri Nov  6 22:55:22 CET 2009     toor@polaris:/usr/obj/usr/src/sys/POLARIS  amd64
Reply With Quote
  #25  
Old November 9th, 2009, 21:48
thuglife's Avatar
thuglife thuglife is offline
Member
  
Join Date: Jul 2009
Location: Athens, Greece
Posts: 159
Thanks: 4
Thanked 40 Times in 25 Posts
Default
I hope you can find anything useful.

Code:
1257789518.518887: State: ASSOCIATING -> ASSOCIATED
1257789518.518910: Associated to a new BSS: BSSID=00:05:59:0c:47:60
1257789518.518917: No keys have been configured - skip key clearing
1257789518.518926: Associated with 00:05:59:0c:47:60
1257789518.518932: WPA: Association event - clear replay counter
1257789518.518937: WPA: Clear old PTK
1257789518.518942: EAPOL: External notification - portEnabled=0
1257789518.518949: EAPOL: External notification - portValid=0
1257789518.518954: EAPOL: External notification - EAP success=0
1257789518.518960: EAPOL: External notification - portEnabled=1
1257789518.518965: EAPOL: SUPP_PAE entering state CONNECTING
1257789518.518970: EAPOL: enable timer tick
1257789518.518979: EAPOL: SUPP_BE entering state IDLE
1257789518.518987: Setting authentication timeout: 10 sec 0 usec
1257789518.518998: Cancelling scan request
1257789518.535316: RX EAPOL from 00:05:59:0c:47:60
1257789518.535329: RX EAPOL - hexdump(len=121): 01 03 00 75 02\
   00 8a 00 10 00 00 00 00 00 00 00 36 9d 16 28 05 dd 2a c7 7c\
   a6 bc c8 67 20 68 5f c1 4d 77 81 65 30 cc bb 57 d1 ea eb 36\
   ce 6b 1a e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04\
   ed 90 07 d4 a2 38 80 e7 44 a9 d6 52 28 b4 4f 85
1257789518.535404: Setting authentication timeout: 10 sec 0 usec

...

1257789518.535606: State: ASSOCIATED -> 4WAY_HANDSHAKE
1257789518.535613: WPA: RX message 1 of 4-Way Handshake from 00:05:59:0c:47:60 (ver=2)
1257789518.535622: RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 ed 90 07 d4 a2 38 80 e7 44 a9 d6 52 28 b4 4f 85
1257789518.535644: RSN: PMKID from Authenticator - hexdump(len=16): ed 90 07 d4 a2 38 80 e7 44 a9 d6 52 28 b4 4f 85
1257789518.535658: RSN: no matching PMKID found
1257789518.535942: WPA: Renewed SNonce - hexdump(len=32): 10 65\
   26 99 e2 8f 6b ad dd 85 9d dc 9c 07 f6 bd af 96 86 98 9c e1\
   cf c1 1d 7c 35 99 75 58 9d 96
1257789518.536002: WPA: PTK derivation - A1=00:21:6a:6e:3d:b6 A2=00:05:59:0c:47:60
1257789518.536013: WPA: PMK - hexdump(len=32): [REMOVED]
1257789518.536019: WPA: PTK - hexdump(len=64): [REMOVED]
1257789518.536026: WPA: WPA IE for msg 2/4 - hexdump(len=22): 30\
   14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1257789518.536046: WPA: Sending EAPOL-Key 2/4
1257789518.536060: WPA: TX EAPOL-Key - hexdump(len=121): 01 03\
   00 75 02 01 0a 00 00 00 00 00 00 00 00 00 36 10 65 26 99 e2\
   8f 6b ad dd 85 9d dc 9c 07 f6 bd af 96 86 98 9c e1 cf c1 1d\
   7c 35 99 75 58 9d 96 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 22\
   ba 30 a3 fb 78 07 e3 2a e1 f4 6c 29 c7 2a 6f 00 16 30 14 01\
   00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
1257789518.589574: RX EAPOL from 00:05:59:0c:47:60
1257789518.589586: RX EAPOL - hexdump(len=179): 01 03 00 af 02\
   13 ca 00 10 00 00 00 00 00 00 00 37 9d 16 28 05 dd 2a c7 7c\
   a6 bc c8 67 20 68 5f c1 4d 77 81 65 30 cc bb 57 d1 ea eb 36\
   ce 6b 1a e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 a6 af 23\
   31 3e f1 63 6f 1e 90 b6 91 14 39 1f 00 50 fd e0 e9 a4 21 d9\
   72 aa a4 94 22 25 8c 9a 43 ae ba 03 af 5b 3e b3 96 d7 19 96\
   23 cd cd 2c 07 41 f0 f2 31 33 2a 9a 3a d3 b9 49 e3 aa 94 ee\
   55 ef 0e b2 fe b1 0c b2 a2 5d 90 03 34 4c 17 b5 8a 61 e4 23\
   f7 15 b7 05 1b c8 98 28 2f 14 eb 4e ec 8c
1257789518.589683: IEEE 802.1X RX: version=1 type=3 length=175
1257789518.589690:   EAPOL-Key type=2
1257789518.589695:   key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
1257789518.589705:   key_length=16 key_data_length=80
1257789518.589711:   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 37
1257789518.589722:   key_nonce - hexdump(len=32): 9d 16 28 05 dd\
   2a c7 7c a6 bc c8 67 20 68 5f c1 4d 77 81 65 30 cc bb 57 d1\
   ea eb 36 ce 6b 1a e0
1257789518.589742:   key_iv - hexdump(len=16): 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00
1257789518.589757:   key_rsc - hexdump(len=8): 00 00 00 00 00 00\
   00 00
1257789518.589767:   key_id (reserved) - hexdump(len=8): 00 00\
   00 00 00 00 00 00
1257789518.589777:   key_mic - hexdump(len=16): e5 a6 af 23 31\
   3e f1 63 6f 1e 90 b6 91 14 39 1f
1257789518.589792: WPA: RX EAPOL-Key - hexdump(len=179): 01 03\
   00 af 02 13 ca 00 10 00 00 00 00 00 00 00 37 9d 16 28 05 dd\
   2a c7 7c a6 bc c8 67 20 68 5f c1 4d 77 81 65 30 cc bb 57 d1\
   ea eb 36 ce 6b 1a e0 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5\
   a6 af 23 31 3e f1 63 6f 1e 90 b6 91 14 39 1f 00 50 fd e0 e9\
   a4 21 d9 72 aa a4 94 22 25 8c 9a 43 ae ba 03 af 5b 3e b3 96\
   d7 19 96 23 cd cd 2c 07 41 f0 f2 31 33 2a 9a 3a d3 b9 49 e3\
   aa 94 ee 55 ef 0e b2 fe b1 0c b2 a2 5d 90 03 34 4c 17 b5 8a\
   61 e4 23 f7 15 b7 05 1b c8 98 28 2f 14 eb 4e ec 8c
1257789518.589901: RSN: encrypted key data - hexdump(len=80): fd\
   e0 e9 a4 21 d9 72 aa a4 94 22 25 8c 9a 43 ae ba 03 af 5b 3e\
   b3 96 d7 19 96 23 cd cd 2c 07 41 f0 f2 31 33 2a 9a 3a d3 b9\
   49 e3 aa 94 ee 55 ef 0e b2 fe b1 0c b2 a2 5d 90 03 34 4c 17\
   b5 8a 61 e4 23 f7 15 b7 05 1b c8 98 28 2f 14 eb 4e ec 8c
1257789518.605316: WPA: decrypted EAPOL-Key key data - hexdump(len=72): [REMOVED]
1257789518.605326: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
1257789518.605333: WPA: RX message 3 of 4-Way Handshake from 00:05:59:0c:47:60 (ver=2)
1257789518.605342: WPA: IE KeyData - hexdump(len=72): 30 18 01\
   00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac\
   02 01 00 dd 26 00 0f ac 01 02 00 67 e1 4f 0d f4 55 5e 19 6d\
   72 53 1a f3 0c e6 41 96 3e 10 04 89 df fd d1 c7 8e ce c7 ce\
   fe 94 f5 dd 00 00 00 00 00
1257789518.605388: WPA: Sending EAPOL-Key 4/4
1257789518.605403: WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00\
   5f 02 03 0a 00 00 00 00 00 00 00 00 00 37 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ba 38\
   c6 30 64 11 44 d1 f6 fe a3 f2 de 6c bd 69 00 00
1257789518.605476: WPA: Installing PTK to the driver.
1257789518.605522: wpa_driver_bsd_set_key: alg=CCMP addr=00:05:59:0c:47:60 key_idx=0 set_tx=1 seq_len=6 key_len=16
1257789518.605546: EAPOL: External notification - portValid=1
1257789518.605553: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
1257789518.605560: RSN: received GTK in pairwise handshake - hexdump(len=34): [REMOVED]
1257789518.605567: WPA: Group Key - hexdump(len=32): [REMOVED]
1257789518.605597: WPA: Installing GTK to the driver (keyidx=2 tx=0 len=32).
1257789518.605605: WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
1257789518.605618: wpa_driver_bsd_set_key: alg=TKIP addr=ff:ff:ff:ff:ff:ff key_idx=2 set_tx=0 seq_len=6 key_len=32
1257789518.605643: WPA: Key negotiation completed with 00:05:59:0c:47:60 [PTK=CCMP GTK=TKIP]
1257789518.605650: Cancelling authentication timeout
1257789518.605657: State: GROUP_HANDSHAKE -> COMPLETED
1257789518.605669: CTRL-EVENT-CONNECTED - Connection to 00:05:59:0c:47:60 completed (auth) [id=0 id_str=]
1257789518.605675: EAPOL: External notification - portValid=1
1257789518.605681: EAPOL: External notification - EAP success=1
1257789518.605686: EAPOL: SUPP_PAE entering state AUTHENTICATING
1257789518.605691: EAPOL: SUPP_BE entering state SUCCESS
1257789518.605696: EAP: EAP entering state DISABLED
1257789518.605702: EAPOL: SUPP_PAE entering state AUTHENTICATED
1257789518.605707: EAPOL: SUPP_BE entering state IDLE
1257789518.605713: EAPOL authentication completed successfully
1257789519.607926: RSN: processing PMKSA candidate list
1257789519.607941: RSN: not in suitable state for new pre-authentication
1257789521.537606: EAPOL: startWhen --> 0
1257789521.537619: EAPOL: disable timer tick
1257791506.301473: RTM_IFINFO: Interface 'wlan0' DOWN
1257791506.301491: Configured interface was removed.
1257791506.301500: State: COMPLETED -> DISCONNECTED
1257791506.301508: EAPOL: External notification - portEnabled=0
1257791506.301514: EAPOL: SUPP_PAE entering state DISCONNECTED
1257791506.301519: EAPOL: SUPP_BE entering state INITIALIZE
1257791506.301527: EAPOL: External notification - portValid=0
1257791506.301533: EAPOL: External notification - EAP success=0
1257791506.301640: Removing interface wlan0
1257791506.301650: State: DISCONNECTED -> DISCONNECTED
1257791506.301657: wpa_driver_bsd_del_key: keyidx=0
1257791506.301672: wpa_driver_bsd_del_key: keyidx=1
1257791506.301681: wpa_driver_bsd_del_key: keyidx=2
1257791506.301691: wpa_driver_bsd_del_key: keyidx=3
1257791506.301703: EAPOL: External notification - portEnabled=0
1257791506.301710: EAPOL: External notification - portValid=0
1257791506.301717: wpa_driver_bsd_set_wpa: enabled=0
1257791506.301722: wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
1257791506.301863: Failed to disable WPA in the driver.
1257791506.301868: wpa_driver_bsd_set_drop_unencrypted: enabled=0
1257791506.301879: wpa_driver_bsd_set_countermeasures: enabled=0
1257791506.301889: No keys have been configured - skip key clearing
1257791506.302284: Cancelling scan request
1257791506.302293: Cancelling authentication timeout
1257791506.315435: wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
ELOOP: remaining socket: sock=4 eloop_data=0x800e0b1c0 user_data=0x800e070f0 handler=0x41fb29
Reply With Quote
Reply
Page 1 of 14 1 2311 Last »

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finished: CALL FOR TESTERS Ralink wireless run(4) usb driver for FreeBSD PseudoCylon FreeBSD Development 309 August 28th, 2012 11:41
Marvell Yukon 88E8040T PCI-E & Intel Wi-Fi Link 5100 AGN TzunTzai System Hardware 17 May 3rd, 2012 02:46
Intel Wifi Link 5100 AGN Progress. ndisgen? iwn? TzunTzai Mobile Computing 55 January 3rd, 2010 20:05
8.0 Release and Intel 5300 AGN kaffe System Hardware 1 November 27th, 2009 15:58
[Solved] Wireless driver Intel 4965AGN tom-pele Mobile Computing 4 October 3rd, 2009 13:32


All times are GMT +1. The time now is 10:43.

Contact Us - FreeBSD - Archive - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
The mark FreeBSD is a registered trademark of The FreeBSD Foundation and is used by The FreeBSD Project with the permission of The FreeBSD Foundation.
Web protection and acceleration provided by CloudFlare
0