People can run Apache by user non-root instead of user root. If you hack their Apache, you cannot get root access. non-root user cannot bind port less than 1024.
My problem is that even I delete the rdr line and run Apache at port 80, port 80 still dead from outside.
People (me too) believe to run any service at port greater than 1024 is more secure than ports less than 1024. Some service even refuse to run at port less than 1024. Some people scared to run services at ports less than port 1024. I do not know why.
To run www on a non standard port is for security.
To redirect to port 80 is to allow use to use pccom.ca instead of pccom.ca:8280 to access the web site.
Hi, junovitch!
I was kicking my 10.1 from outside with telnet pccom.ca 80
It displayed like this:
Trying 209.141.130.62 ...
telnet: connet to address 209.141.130.62: operation time out
telnet: Unable to connect to remote host
While doing this:
In my 10.1, it looked like this:
root@www:/etc #...
Hi, micski!
I have 2 NICs, one is the external IP and another one is for internal. This setup worked in 10.0. I upgraded to 10.1, now it is not working for the port redirecting. It seems that port 80 is blocked. I can telnet <MY IP> 8280, but not telnet <MY IP> 80
Then I disabled pf and changed...
I have made bhyve working in FreeBSD-10.0. But I can not make the network working in a gateway server. I can ping from the host to the guest. But I cannot ping from the guest to the host.
root@frank:~ # ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
^C
--- 192.168.0.1 ping...
You are right. FreeBSD 10.0 still needs the old style routing.
This is my rc.conf
hostname="www.pccom.ca"
ifconfig_re0="DHCP"
ifconfig_re1="inet 192.168.0.1 netmask 255.255.255.0"
gateway_enable="YES"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
sshd_enable="YES"
ntpd_enable="YES"...
Hello!
I just fresh installed FreeBSD 10.0-RELEASE. I do not want to do anything but to make the router work.
I have 2 NICs. re0 is connected to the modem. re1 is connected to the switch. The switch hooked up server Windows computers.
I am still not be able to make the FreeBSD router work.
This...
Hi, everybody!
I was able to set up FreeBSD as a router by using PF or firewall in FreeBSD 7,8,9. But in FreeBSD 10.0, there is a static_routes and route_<route> command in rc.conf file. Now I am not able to set up a router. Do I still need PF or firewall? Please help to set up a router by...
Hi,FreeBSD gurus!
I was trying to install FreeBSD 10.0 on a third hard drive in a FreeBSD 9.2 computer. I do not know how the 10.0 killed the 9.2.
Now when I boot the 9.2 disk and trying to mount the root from /dev/raid/r0p2 [rw,acls] ...
/usr/lib32/libedit.so.7: unsupported file layout.
Enter...
Hi, guys!
I did a cd /usr/src; svn up and make buildworld && make buildkernel && make installkernel ; reboot then mergemaster -p ; cd /usr/src && make installworld ; mergemaster && make clean-old && make clean-old-libs. I got a
root@d4:/usr/ports/sysutils/ipmitool # uname -a
FreeBSD...
If i were you, I would install the root freebsd FreeBSD on a mirror of the two SSD hard drives plus two partitions from the 2 TB hard drives. So you have a mirror with four disks. Then you can swap the four partitions from the 2 TB hard drive off-line and on-line. In case something goes wrong...
I have upgraded to 10.0-RC5. The samba4 port now is 4.0.13. Still has the same problem as you guys. I use killall samba to stop samba4 and service samba4 start to start. Do not use service samba4 restart
Re: FreeBSD v10 ports system has me yearning for a GUI manag
You cannot install two revisions if they are eventually conflict. For example, Apache24 and Apache22. The solution is to install one revision first, say, Apache22. Then try to make everything else compatible with it. In another...
Hi, FreeBSD team!
I can see a snapshot after I created. After I made a clone for the snapshot, I cannot see the cloned snapshot. Could you please fix it:
root@v220:/dev/zvol/zroot # zfs clone zroot/vol@installed zroot/first-run
root@v220:/dev/zvol/zroot # ls
vol vol@installed...
Hi, FreeBSD team members! After splitting a mirror, FreeBSD went mad. Please help!
root@st40:/usr/home/peng # uname -a
FreeBSD st40.dc.pccom.ca 10.0-RC3 FreeBSD 10.0-RC3 #0 r259928M: Thu Dec 26 21:48:04 EST 2013 peng@st40.dc.pccom.ca:/usr/obj/usr/src/sys/GENERIC amd64...
Hi, I run into a problem with FreeBSD 10-0-RC2 when I split a ZFS mirror and import it. It is the root file system. But I do not know why ZFS failed after splitting a mirror. Please help.
root@ibm2:/home/peng # zpool status
pool: zroot
state: ONLINE
scan: resilvered 8.61G in 0h8m with 0...
Hi, FreeBSD team members!
I recompiled kernel and world on a HP Compaq computer with 4GB memory. It is OK to get revision of r259679M.
Then, I was trying to :
cd /usr/src
svn update
make cleandir && make cleandir && make buildworld && make buildkernel && make installkernel
It went hanging...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.