Search results

  1. H

    no driver attached

    In fact, I gave up my research concerning that driver and the other. Indeed I tried a lot of drivers without success. Now concerning your laptop's CPU temperature, I can't tell you if attached driver will help you. Without this driver, my temperature goes down to 42°C. Let me know if you find...
  2. H

    pf, fail2ban and portsentry

    Now I solved the problem of fail2ban. First It's needed to add in /usr/local/etc/fail2ban/filter.d/sshd the following regex in the field failregex : error: PAM: authentication error for .* from <HOST>\s*$ It's possible to check the regex with the command : fail2ban-regex /var/log/auth.log...
  3. H

    black screen during sleep resuming

    I have added in /boot/loader.conf acpi_video_load="YES" acpi_sony_load="YES" This is the sysctl variables : sysctl -a | grep acpi.video dev.acpi_video.0.%desc: ACPI video extension dev.acpi_video.0.%driver: acpi_video dev.acpi_video.0.%parent: vgapci0 sysctl -a | grep acpi.sony...
  4. H

    black screen during sleep resuming

    I agree with gnemmi. My card doesn´t seem to be supported... Let's show my /etc/X11/xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection #Section...
  5. H

    pf, fail2ban and portsentry

    Now, concerning fail2ban, let me first show all configurations I have don : /etc/rc.conf fail2ban_enable="YES" /etc/pf.conf ext_if="{wlan0,alc0}" ext_services="{1,22}" int_services="{25,80,139,445,631,3306}" # Déclaration du tableau référençant toutes les adresses IP affectées au #...
  6. H

    pf, fail2ban and portsentry

    /var/log/messages Jun 27 10:41:52 heavenboy-freebsd portsentry[3833]: adminalert: PortSentry 1.2 is starting. Jun 27 10:41:52 heavenboy-freebsd portsentry[3834]: adminalert: Going into listen mode on UDP port: 1 Jun 27 10:41:52 heavenboy-freebsd portsentry[3834]: adminalert: Going into listen...
  7. H

    black screen during sleep resuming

    Same problem with Intel module loaded :(
  8. H

    black screen during sleep resuming

    I agree with you when you say it "seems to be the lack of a reliable driver for your graphic card". I'm using VESA module whereas I have an Intel graphics card. It's not the first time I have some problem with that. So I will expect the working of FreeBSD´s Konstantin Belousov and DragonFlyBSD...
  9. H

    pf, fail2ban and portsentry

    With this try, I can connect in ssh (as wanted), the scan port output is the same that this one of June 23rd, 2011, 17:02. However the IP of the machine scanning isn't added to the table so it's not blocked.
  10. H

    black screen during sleep resuming

    Moreover, there is no more information in /var/log/messages: 391 Jun 24 20:11:57 heavenboy-freebsd wpa_supplicant[378]: CTRL-EVENT-SCAN-RESULTS 392 Jun 24 20:14:15 heavenboy-freebsd acpi: suspend at 20110624 20:14:15 393 Jun 24 20:18:24...
  11. H

    black screen during sleep resuming

    This is my dmesg output after a black screen during resume and a 'hard' reboot : Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered...
  12. H

    pf, fail2ban and portsentry

    If we consider your /etc/pf.conf of Yesterday, 18:26 : pass in block in quick from <antiscan> pass out it blocks well if a scan occurred but there is no rule on the ports from 'out'. Especially, I would like to close all the ports except from port 22. That's why I wrote : block in all...
  13. H

    pf, fail2ban and portsentry

    This is the full nmap output : nmap -v 192.168.1.67 Starting Nmap 5.00 ( http://nmap.org ) at 2011-06-24 19:49 CEST NSE: Loaded 0 scripts for scanning. Initiating Ping Scan at 19:49 Scanning 192.168.1.67 [2 ports] Completed Ping Scan at 19:49, 0.01s elapsed (1 total hosts) Initiating...
  14. H

    pf, fail2ban and portsentry

    First, I would like to thank your for you assistance. Below, the nmap outputs: nmap -v 192.168.1.67 Starting Nmap 5.00 ( http://nmap.org ) at 2011-06-23 19:04 CEST NSE: Loaded 0 scripts for scanning. Initiating Ping Scan at 19:04 Scanning 192.168.1.67 [2 ports] Completed Ping Scan at 19:04...
  15. H

    pf, fail2ban and portsentry

    Well I tried with simple rules as you proposed. Below, the nmap outputs: nmap -v 192.168.1.67 Starting Nmap 5.00 ( http://nmap.org ) at 2011-06-23 16:52 CEST NSE: Loaded 0 scripts for scanning. Initiating Ping Scan at 16:52 Scanning 192.168.1.67 [2 ports] Completed Ping Scan at 16:52, 3.00s...
  16. H

    pf, fail2ban and portsentry

    /etc/rc.d/pf status No ALTQ support in kernel ALTQ related functions disabled Status: Enabled for 0 days 01:41:25 Debug: Urgent State Table Total Rate current entries 2 searches...
  17. H

    pf, fail2ban and portsentry

    Hello, I'm trying to secure my laptop. First I have configured pf : /etc/rc.conf pf_enable="YES" pf_rules="/etc/pf.conf" pflog_enable="YES" pflog_logfile="/var/log/pflog" /etc/pf.conf ext_if="{wlan0,alc0}"...
  18. H

    black screen during sleep resuming

    Thank you for your help. I will watch.
  19. H

    black screen during sleep resuming

    I also follow this link : Power management but without better results...
  20. H

    Bluetooth doesn't work

    Does someone can explain me why it doesn't work?
Back
Top