connecting to internet fail over PPPoE [Archive]

View Full Version : connecting to internet fail over PPPoE

SIFE

August 13th, 2009, 17:25

Salamo Alikom
my configuration file of ppp.conf :
################################################## ###############
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.10.18.1 2008/11/25 02:59:29 kensmith Exp $
################################################## ###############

default:
set log Phase tun command# Chat LCP IPCP CCP tun command
#ident user-ppp VERSION (built COMPILATIONDATE)
#set ifaddr 10.0.0.1/0 10.0.0.2/0
set ifaddr 192.168.1.1/0 192.168.1.2/0
# Ensure that "device" references the correct serial port
# for your modem. (cuad0 = COM1, cuad1 = COM2)
#
#set device /dev/cuad1

#set speed 115200
#set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
#set timeout 180 # 3 minute idle timer (the default)
#enable dns # request DNS info (for resolv.conf)

ADSL:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
# set phone 0xxxxxxxxx
set device PPPoE:sis0
set authname XXXXXX
set authkey XXXXXXX
set dial
set login
#set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
#add default HISADDR # Add a (sticky) default route

but when i type :
ping yahoo.com
there is no response .

SirDice

August 13th, 2009, 17:42

Please supply more information, we cannot tell what's happening just by looking at a config file.

Is the interface being created?
Is the connection being made?
Do you get an IP address?

Have a look in the ppp.log.

DutchDaemon

August 13th, 2009, 17:47

(and do you have a nameserver? does yahoo.com actually resolve?)

SIFE

August 18th, 2009, 09:13

this is my ppp.log

Jan 2 00:01:28 ppp[1136]: tun0: Chat: Expect(5): OK
Jan 2 00:01:29 ppp[1468]: tun4: Phase: deflink: Connected!
Jan 2 00:01:29 ppp[1468]: tun4: Phase: deflink: opening -> dial
Jan 2 00:01:29 ppp[1468]: tun4: Phase: deflink: dial -> carrier
Jan 2 00:01:31 ppp[1204]: tun1: Chat: deflink: Redial timer expired.
Jan 2 00:01:31 ppp[1204]: tun1: Warning: deflink: Device (PPPoE) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:31 ppp[1204]: tun1: Warning: deflink: Device (sis0) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:31 ppp[1204]: tun1: Chat: Failed to open device
Jan 2 00:01:31 ppp[1204]: tun1: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:01:33 ppp[1136]: tun0: Chat: Expect timeout
Jan 2 00:01:33 ppp[1136]: tun0: Warning: Chat script failed
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: dial -> hangup
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: Disconnected!
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 2 00:01:33 ppp[1136]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Mon Jan 2 00:01:23 2006
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: hangup -> opening
Jan 2 00:01:33 ppp[1136]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: Disconnected!
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: carrier -> hangup
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: 39 packets in, 43 packets out
Jan 2 00:01:34 ppp[1468]: tun4: Phase: total 0 bytes/sec, peak 0 bytes/sec on Mon Jan 2 00:01:29 2006
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: hangup -> opening
Jan 2 00:01:34 ppp[1468]: tun4: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:01:38 ppp[1281]: tun2: Chat: deflink: Redial timer expired.
Jan 2 00:01:38 ppp[1281]: tun2: Warning: deflink: Device (PPPoE) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:38 ppp[1281]: tun2: Warning: deflink: Device (sis0) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:38 ppp[1281]: tun2: Chat: Failed to open device
Jan 2 00:01:38 ppp[1281]: tun2: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:01:42 ppp[1355]: tun3: Warning: deflink: Device (PPPoE) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:42 ppp[1355]: tun3: Warning: deflink: Device (sis0) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:01:42 ppp[1355]: tun3: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:02:01 ppp[1204]: tun1: Chat: deflink: Redial timer expired.
Jan 2 00:02:01 ppp[1204]: tun1: Warning: deflink: Device (PPPoE) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:02:01 ppp[1204]: tun1: Warning: deflink: Device (sis0) must begin with a '/', a '!' or contain at least one ':'
Jan 2 00:02:01 ppp[1204]: tun1: Chat: Failed to open device
Jan 2 00:02:01 ppp[1204]: tun1: Phase: deflink: Enter pause (30) for redialing.
Jan 2 00:02:03 ppp[1136]: tun0: Chat: deflink: Redial timer expired.
Jan 2 00:02:03 ppp[1136]: tun0: Phase: deflink: Connected!
Jan 2 00:02:03 ppp[1136]: tun0: Phase: deflink: opening -> dial
Jan 2 00:02:03 ppp[1136]: tun0: Chat: Phone: XXXXXXX
Jan 2 00:02:03 ppp[1136]: tun0: Chat: Send: AT^M
Jan 2 00:02:03 ppp[1136]: tun0: Chat: Expect(5): OK
Jan 2 00:02:04 ppp[1468]: tun4: Phase: deflink: Connected!
Jan 2 00:02:04 ppp[1468]: tun4: Phase: deflink: opening -> dial
Jan 2 00:02:04 ppp[1468]: tun4: Phase: deflink: dial -> carrier
Aug 14 05:09:27 localhost ppp[1731]: Phase: Using interface: tun0
Aug 14 05:09:27 localhost ppp[1731]: Phase: deflink: Created in closed state
Aug 14 05:09:27 localhost ppp[1731]: tun0: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 14 05:09:27 localhost ppp[1731]: tun0: Phase: PPP Started (interactive mode).
Aug 14 05:09:33 localhost ppp[1731]: tun0: Command: /dev/ttyp1: off
Aug 14 05:09:38 localhost ppp[1731]: tun0: Command: /dev/ttyp1: turn off
Aug 14 05:09:40 localhost ppp[1731]: tun0: Command: /dev/ttyp1: exit
Aug 14 05:09:43 localhost ppp[1731]: tun0: Command: /dev/ttyp1: quit
Aug 14 05:09:43 localhost ppp[1731]: tun0: Phase: PPP Terminated (normal).
Aug 14 05:09:50 localhost ppp[1743]: Phase: Using interface: tun0
Aug 14 05:09:50 localhost ppp[1743]: Phase: deflink: Created in closed state
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: fawri: set device PPPoE:sis0
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: fawri: set authname XXXXXXX
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: fawri: set authkey ********
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: fawri: set dial
Aug 14 05:09:50 localhost ppp[1743]: tun0: Command: fawri: set login
Aug 14 05:09:50 localhost ppp[1743]: tun0: Phase: PPP Started (interactive mode).
Aug 14 05:09:53 localhost ppp[1743]: tun0: Phase: Caught signal 2, abort connection(s)
Aug 14 05:13:32 localhost ppp[1743]: tun0: Phase: Signal 1, terminate.
Aug 14 05:13:32 localhost ppp[1743]: tun0: Phase: PPP Terminated (normal).
Aug 16 20:18:29 localhost ppp[966]: Phase: Using interface: tun0
Aug 16 20:18:29 localhost ppp[966]: Phase: deflink: Created in closed state
Aug 16 20:18:29 localhost ppp[966]: tun0: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 16 20:18:29 localhost ppp[966]: tun0: Phase: PPP Started (interactive mode).
Aug 16 20:18:34 localhost ppp[966]: tun0: Command: /dev/ttyp0: exit
Aug 16 20:18:37 localhost ppp[966]: tun0: Command: /dev/ttyp0: quit
Aug 16 20:18:37 localhost ppp[966]: tun0: Phase: PPP Terminated (normal).
Aug 16 20:18:41 localhost ppp[978]: Phase: Using interface: tun0
Aug 16 20:18:41 localhost ppp[978]: Phase: deflink: Created in closed state
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: fawri: set device PPPoE:sis0
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: fawri: set authname XXXXXXX
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: fawri: set authkey ********
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: fawri: set dial
Aug 16 20:18:41 localhost ppp[978]: tun0: Command: fawri: set login
Aug 16 20:18:41 localhost ppp[978]: tun0: Phase: PPP Started (interactive mode).
Aug 16 20:18:47 localhost ppp[978]: tun0: Command: /dev/ttyp0: exit
Aug 16 20:18:49 localhost ppp[978]: tun0: Command: /dev/ttyp0: quit
Aug 16 20:18:49 localhost ppp[978]: tun0: Phase: PPP Terminated (normal).
Aug 16 20:39:26 localhost ppp[1043]: Phase: Using interface: tun0
Aug 16 20:39:26 localhost ppp[1043]: Phase: deflink: Created in closed state
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: fawri: set device PPPoE:sis0
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: fawri: set authname XXXXXXX
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: fawri: set authkey ********
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: fawri: set dial
Aug 16 20:39:26 localhost ppp[1043]: tun0: Command: fawri: set login
Aug 16 20:39:26 localhost ppp[1043]: tun0: Phase: PPP Started (interactive mode).
Aug 16 20:39:28 localhost ppp[1043]: tun0: Phase: Caught signal 2, abort connection(s)
Aug 16 20:39:59 localhost ppp[1047]: Phase: Using interface: tun1
Aug 16 20:39:59 localhost ppp[1047]: Phase: deflink: Created in closed state
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: default: set ifaddr 192.168.1.1/0 192.168.1.2/0
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: fawri: set device PPPoE:sis0
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: fawri: set authname XXXXXXX
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: fawri: set authkey ********
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: fawri: set dial
Aug 16 20:39:59 localhost ppp[1047]: tun1: Command: fawri: set login
Aug 16 20:39:59 localhost ppp[1047]: tun1: Phase: PPP Started (interactive mode).
Aug 16 20:39:59 localhost ppp[1047]: tun1: Phase: Caught signal 2, abort connection(s)

SIFE

August 19th, 2009, 17:57

this my new log and configuration for ppp :
ppp.conf

default:
set log Phase tun command# Chat LCP IPCP CCP tun command
set ifaddr 10.0.0.1/0 10.0.0.2/0
set timeout 180 # 3 minute idle timer (the default)

fawri:
set device PPPoE:sis0
set authname XXXXXXXXX
set authkey XXXXXXXXX
set dial
set login
add default HISADDR

ppp.log

Aug 17 17:09:51 localhost ppp[999]: Phase: Using interface: tun0
Aug 17 17:09:51 localhost ppp[999]: Phase: deflink: Created in closed state
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: default: set timeout 180
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: set device PPPoE:sis0
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: set authname XXXXXXXXX
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: set authkey ********
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: set dial
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: set login
Aug 17 17:09:51 localhost ppp[999]: tun0: Command: fawri: add default HISADDR
Aug 17 17:09:51 localhost ppp[1001]: tun0: Phase: PPP Started (ddial mode).
Aug 17 17:09:51 localhost ppp[1001]: tun0: Phase: bundle: Establish
Aug 17 17:09:51 localhost ppp[1001]: tun0: Phase: deflink: closed -> opening
Aug 17 17:09:52 localhost ppp[1001]: tun0: Phase: deflink: Connected!
Aug 17 17:09:52 localhost ppp[1001]: tun0: Phase: deflink: opening -> dial
Aug 17 17:09:52 localhost ppp[1001]: tun0: Phase: deflink: dial -> carrier
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "DJE")
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Received NGM_PPPOE_SESSIONID
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Received NGM_PPPOE_SUCCESS
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: deflink: carrier -> login
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: deflink: login -> lcp
Aug 17 17:09:54 localhost ppp[1001]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: bundle: Authenticate
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Chap Input: CHALLENGE (16 bytes)
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Chap Output: RESPONSE (XXXXXXXXX)
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: Chap Input: SUCCESS (Authentication success,Welcome!)
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: deflink: lcp -> open
Aug 17 17:09:54 localhost ppp[1001]: tun0: Phase: bundle: Network
Aug 17 17:09:54 localhost ppp[1001]: tun0: Warning: 0.0.0.0/0: Change route failed: errno: No such process
Aug 17 17:09:54 localhost ppp[1001]: tun0: Warning: ff02:4::/32: Change route failed: errno: Network is unreachable

when ping to yahoo.com ,a message appear say : can't resolve host name .

aragon

August 19th, 2009, 23:20

Edit these lines in:

set log Phase tun command LCP IPCP CCP
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0

And repost the resulting ppp.log.

SIFE

August 21st, 2009, 18:10

accroding to this lines i think the problem is in my interface configuration ,my router is 192.168.1.1 .
Aug 18 17:03:37 localhost ppp[1190]: tun0: Warning: 0.0.0.0/0: Change route failed: errno: No such process
Aug 18 17:03:37 localhost ppp[1190]: tun0: Warning: ff02:4::/32: Change route failed: errno: Network is unreachable
ifconfig -a :

sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:15:58:64:67:88
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
resolv.conf :
nameserver 192.168.1.1
hosts :
::1 localhost localhost.my.domain localhost
127.0.0.1 localhost localhost.my.domain localhost

my gnome is too slow .

aragon

August 21st, 2009, 18:17

Please post a more complete ppp.log. I'd also like to see ifconfig -a after your run ppp. netstat -rn might be useful too.

SIFE

August 21st, 2009, 20:02

the complete log file is attached with the above post .

aragon

August 21st, 2009, 21:35

And what does ifconfig show after connecting? And netstat -rn?

Have you tried adding the default route manually?

SIFE

August 22nd, 2009, 13:24

when i set connection PPPoE and fail i switch to automatic mode via modem
,the problem is i have to restart my box to get a normal connection .
how can i turn off PPPoE if fail to switch to automatic mode with out rebooting my box .