FryShadow
May 7th, 2009, 20:45
Hi all,
Just install FreeBSD 7.2 in my lappy Acer 5050. I checked my Atheros model as below
ath0: <Atheros 2413> mem 0xd0200000-0xd020ffff irq 21 at device 4.0 on pci8
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:19:7d:63:cd:d3
ath0: mac 7.8 phy 4.5 radio 5.6
I already loaded if_ath_load in loader.conf and when I try to scan for a wireless access point, it just hang with any result
fry# ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:19:7d:63:cd:d3
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 3 (2422 Mhz 11g)
authmode OPEN privacy OFF txpower 31.5 bmiss 7 scanvalid 60 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
protmode CTS burst bintval 0
Scanning hang..
fry# ifconfig ath0 up scan
Really hope someone can help/guide me on this :)
thanks in advance
Just install FreeBSD 7.2 in my lappy Acer 5050. I checked my Atheros model as below
ath0: <Atheros 2413> mem 0xd0200000-0xd020ffff irq 21 at device 4.0 on pci8
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:19:7d:63:cd:d3
ath0: mac 7.8 phy 4.5 radio 5.6
I already loaded if_ath_load in loader.conf and when I try to scan for a wireless access point, it just hang with any result
fry# ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:19:7d:63:cd:d3
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 3 (2422 Mhz 11g)
authmode OPEN privacy OFF txpower 31.5 bmiss 7 scanvalid 60 bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
protmode CTS burst bintval 0
Scanning hang..
fry# ifconfig ath0 up scan
Really hope someone can help/guide me on this :)
thanks in advance