brasero can't view dvdrw

[arachnid]

i can't write dvd disk in brasero, because brasero can't view dvd disk. but in nautilus-cd-burner all ok.

7.2-PRERELEASE. fresh 23/04

anybody - help, pls!

[SirDice]

Did you set up atapicam correctly?

[LateNiteTV]

is your devfs.conf edited properly?

[arachnid]

yes, all ok. :( nautilus-cd-burner work fine

#camcontrol devlist
<ASUS DRW-1612BL 1.06> at scbus0 target 0 lun 0 (pass0,cd0)

from devfs.conf
perm cd0 0666
perm xpt0 0666
perm pass0 0666

in brasero button "select disk" in dialog clear is disable, when dvdrw disk installed

[mdma]

i haven't used brasero yet, but got the same issue trying after your post.
could this be that you need to create the necessary links in /dev to your dvd drive. like /dev/dvd -> /dev/acd0 or /dev/dvdr /dev/dvdrw?

i tried them both but brasero shuts down instead of just not finding the drive and i can't see what brasero actually looks for. i.e. dvd or dvdr or dvdrw to start with

edit - yes it works now , i was just lazy and didn't reboot after adding perm 0666 to devfs.conf

add these to devfs.conf (or just one's you want)

# Commonly used by many ports
link acd0 cdrom
link acd0 dvd
link acd0 dvdr
link acd0 dvdrw
link acd0 cd
link acd0 cdr
link acd0 cdrw

brasero found the drive now - just seems a bit slow burning

[jnr]

i was just lazy and didn't reboot after adding perm 0666 to devfs.conf

sudo /etc/rc.d/devfs restart

[arachnid]

add to devfs.conf both variant - with link to acd0 and cd0 so...

/dev# ll cd*
crw-rw-rw- 1 root operator 0, 84 27 апр 09:27 cd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:12 cdr -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:13 cdrom -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:12 cdrw -> acd0
/dev# ll dvd*
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvd -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvdr -> acd0
lrwxr-xr-x 1 root wheel 4 27 апр 13:10 dvdrw -> acd0


nothing change :( brasero don't enable clear disk

[SirDice]

I'm going to assume brasero uses cdrecord. If that's the case the links should point to /dev/cd0 not acd0.

[mdma]

nothing change :( brasero don't enable clear disk

i don't understand, do you mean clear disk as in erase a re-writable disc or brasero still doesn't find the drive? because that function isn't working on mine too. maybe a problem/bug with brasero? it finds the drive ok with all other functions.

[arachnid]

i install dvdrw disk with info. in brasero i can't select drive for clear this disk. with cdrw all ok.

with link to cd0 i try too

# ll /dev/dvd*
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvd -> cd0
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvdr -> cd0
lrwxr-xr-x 1 root wheel 3 27 апр 13:41 /dev/dvdrw -> cd0

with same result - no

[mdma]

it's the same here with dvdrw

[LateNiteTV]

did you compile
device atapicam
into your kernel?

[SirDice]

Did you enable libburn when you build brasero?


# Supports multiple backends: cdrtools, growisofs and libburn(optional).
Note: compiling against libburn is _not_enough. You need to activate the backend through GConf editor at "/apps/brasero/config/libburn_burn and /apps/brasero/config/libburn_iso"

[arachnid]

device atapicam in kernel
brasero build without libburn

when i start brasero -gb


(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:404: Getting blanking flags for Disc
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:407: Blanking not possible: no media
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:587: Testing blanking caps for Disc
(brasero:1534): BraseroBurn-DEBUG: At burn-caps.c:590: no media => no blanking possible


if i run dvd+rw-format under user - blank successful

[IncubuS]

http://bugzilla.gnome.org/show_bug.cgi?id=567822

[FBSDin20Steps]

For someone's interest... I have rebuilt brasero with libburn enabled and I've just finished my first burn with it.


Greetz ;)

[arachnid]

For someone's interest... I have rebuilt brasero with libburn enabled and I've just finished my first burn with it.


Greetz ;)

sorry, but it don't work for me - brasero don't view dvdrw disk :(

add - sorry once more - after add to gconf 2 keys - all ok
may be for other backend need keys too?

[dbi]

These are the defaults for brasero:

[X] NAUTILUS Enable Nautilus extension
[ ] LIBBURNIA Enable libburnia plug-ins


This way it depends on cdrtools among others.
cdrtools installs a sample configuration file called "cdrecord.sample" in "/usr/local/etc". For more info look into that file to see what the syntax is and read cdrecord(1).

To make brasero "see" your recording device you should edit "/usr/local/etc/cderecord".

Here is my config for reference:


# sed '/#/d ; /^$/d' /usr/local/etc/cdrecord
CDR_DEVICE=mydev
CDR_FIFOSIZE=128m
mydev= 2,1,0 -1 128m burnfree
#



To figure out which is your device use:

# cdrecord -scanbus
Cdrecord-Clone 2.01 (i386-unknown-freebsd8.0) Copyright (C) 1995-2004 J�rg Schilling
Using libscg version 'schily-0.8'.
scsibus2:
2,0,0 200) *
2,1,0 201) 'HL-DT-ST' 'DVD-RAM GSA-H20L' '1.00' Removable CD-ROM
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *


HTH

[ericturgeon]

add - sorry once more - after add to gconf 2 keys - all ok
may be for other backend need keys too?

What you did I have The same problem.

[arachnid]

in last time i don't use brasero - quick and easy use command line. because brasero often and often don't view clean disks